ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Effect of recrystallization and grain growth on the mechanical properties of an extruded AZ21 Mg alloy

Azeem, MA and Tewari, A and Ramamurty, U (2010) Effect of recrystallization and grain growth on the mechanical properties of an extruded AZ21 Mg alloy. In: Materials Science and Engineering A, 527 (4-5). pp. 898-903.

[img] PDF
y.pdf - Published Version
Restricted to Registered users only

Download (1MB) | Request a copy
Official URL: http://www.sciencedirect.com/science?_ob=ArticleUR...

Abstract

An experimental investigation into the effect of microstructural changes, which occur during post-extrusion annealing of a Mg based AZ21 alloy, on tensile and fatigue properties is conducted. Mechanical properties in the as-cast, as-extruded, and microstructural states that correspond to recovery, recrystallization and grain growth stages of annealing are compared. Results show that these microstructural changes do not alter the yield strength of the alloy markedly whereas significant differences were noted in the ultimate tensile strength as well as ductility. The initiation of abnormal grain growth (or secondary recrystallization) renders the tensile stress-strain response elastic perfectly plastic and results in a large drop in ductility, as high as similar to 60% during intermediate stages of abnormal grain growth, vis-A-vis the ductility of the as-extruded alloy. While the fatigue performance of all the wrought alloys is far superior to as expected, abnormal grain growth leads to a marked decrease in the endurance that of the as-cast alloy, limit. Possible microscopic origins of these are discussed. (C) 2009 Elsevier B.V. All rights reserved.

Item Type: Journal Article
Publication: Materials Science and Engineering A
Publisher: Elsevier Science
Additional Information: Copyright of this article belongs to Elsevier Science.
Keywords: Magnesium; Wrought alloy; Recrystallization; Grain growth; Mechanical properties; Endurance limit
Department/Centre: Division of Mechanical Sciences > Materials Engineering (formerly Metallurgy)
Date Deposited: 12 Mar 2010 09:32
Last Modified: 19 Sep 2010 05:55
URI: http://eprints.iisc.ac.in/id/eprint/25830

Actions (login required)

View Item View Item