ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Thermoelectric Properties of Co4Sb12 Skutterudite Materials with Partial In Filling and Excess In Additions

Mallik, Ramesh Chandra and Stiewe, Christian and Karpinski, Gabriele and Hassdorf, Ralf and Mueller, Eckhard (2009) Thermoelectric Properties of Co4Sb12 Skutterudite Materials with Partial In Filling and Excess In Additions. In: 27th International Conference on Thermoelectrics, AUG 03-07, 2008, University Oregon, Corvallis, pp. 1337-1343.

[img] PDF
23.pdf - Published Version
Restricted to Registered users only

Download (472kB) | Request a copy
Official URL: http://www.springerlink.com/content/kv11x18u577154...

Abstract

The properties of Co4Sb12 with various In additions were studied. X-ray diffraction revealed the presence of the pure δ-phase of In0.16Co4Sb12, whereas impurity phases (γ-CoSb2 and InSb) appeared for x = 0.25, 0.40, 0.80, and 1.20. The homogeneity and morphology of the samples were observed by Seebeck microprobe and scanning electron microscopy, respectively. All the quenched ingots from which the studied samples were cut were inhomogeneous in the axial direction. The temperature dependence of the Seebeck coefficient (S), electrical conductivity (σ), and thermal conductivity (κ) was measured from room temperature up to 673 K. The Seebeck coefficient of all In-added Co4Sb12 materials was negative. When the filler concentration increases, the Seebeck coefficient decreases. The samples with In additions above the filling limit (x = 0.22) show an even lower Seebeck coefficient due to the formation of secondary phases: InSb and CoSb2. The temperature variation of the electrical conductivity is semiconductor-like. The thermal conductivity of all the samples decreases with temperature. The central region of the In0.4Co4Sb12 ingot shows the lowest thermal conductivity, probably due to the combined effect of (a) rattling due to maximum filling and (b) the presence of a small amount of fine-dispersed secondary phases at the grain boundaries. Thus, regardless of the non-single-phase morphology, a promising ZT (S 2 σT/κ) value of 0.96 at 673 K has been obtained with an In addition above the filling limit.

Item Type: Conference Paper
Publication: Journal of Electronic Materials
Publisher: Springer
Additional Information: The copyright of this article belongs to Springer.
Keywords: Skutterudite; thermoelectric; electrical conductivity; thermal conductivity; Seebeck coefficient
Department/Centre: Division of Physical & Mathematical Sciences > Physics
Date Deposited: 03 Jan 2010 08:36
Last Modified: 19 Sep 2010 05:38
URI: http://eprints.iisc.ac.in/id/eprint/21649

Actions (login required)

View Item View Item