Phosphorus Partition between Liquid Steel and $CaO-SiO_2-FeO_x -P_2O_5-MgO$ Slag Containing 15 to 25 Pct FeO

Basu, Somnath and Lahiri, Ashok Kumar and Seetharaman, Seshadri (2007) Phosphorus Partition between Liquid Steel and $CaO-SiO_2-FeO_x -P_2O_5-MgO$ Slag Containing 15 to 25 Pct FeO. In: Metallurgical and Materials Transactions B, 38 (4). pp. 623-630.

PDF Phosphorus_Partition.pdf - Published Version Restricted to Registered users only Download (374kB) | Request a copy

Abstract

$CaO-SiO_2-FeO_x -P_2O_5-MgO$ bearing slags are typically used in the basic oxygen steelmaking (BOS) process. The partition ratio of phosphorus between slag and steel is an index of the phosphorus holding capacity of the slag, which determines the phosphorus content achievable in the finished steel. The influence of factors such as FeO content and basicity on the phosphorus partition ratio was investigated at two different temperatures. The partition ratio initially increased with basicity but remained constant beyond a basicity of 2.5 to 2.6. An increase in the FeO content up to 18 to 20 mass pct was beneficial for the phosphorus partition at a basicity level of 2 to 3, but a higher concentration of FeO resulted in a decrease in the phosphorus partition ratio; the FeO concentration corresponding to this transition varied with basicity and temperature. At even lower basicities, however, the equilibrium phosphorus partition showed either no change, or a marginally decreasing trend, with an increase in the FeO content.

Item Type:	Journal Article
Publication:	Metallurgical and Materials Transactions B
Publisher:	Springer
Additional Information:	Copyright of this article belongs to Springer.
Department/Centre:	Division of Mechanical Sciences > Materials Engineering (formerly Metallurgy)
Date Deposited:	06 Nov 2007
Last Modified:	08 Feb 2012 04:26
URI:	http://eprints.iisc.ac.in/id/eprint/12436

Actions (login required)

View Item