Bhadra, S and Ganguli, R (2006) Aeroelastic optimization of a helicopter rotor using orthogonal array-based metamodels. In: AIAA Journal, 44 (9) . pp. 1941-1951.
![]() |
PDF
AIAA_Journal_44_9_Sep_2006.pdf - Published Version Restricted to Registered users only Download (93kB) | Request a copy |
Abstract
Aeroelastic optimization of a four-bladed, soft-inplane hingeless rotor is performed to reduce hub loads and blade root loads with blade stiffness design variables. An aeroelastic analysis based on the finite element method is used. Aerodynamic modeling includes a time domain unsteady aerodynamic model and a free wake model. Metamodels (models of models) of the aeroelastic analysis are investigated in a systematic manner including various experimental designs such as factorial designs, central composite designs (CCD), gradient-enhanced CCD, and orthogonal arrays (OA). Linear, quadratic, and cubic polynomial response surfaces are obtained, and graphical, statistical, and,optimization results obtained are used to compare the different designs. It is found that the CCD and OA are able to capture the basic trends of the analysis using sequential second-order polynomial response surfaces and are further investigated for use in optimization. However, the OA, which is a fractional factorial design, requires significantly fewer analysis runs than the CCD. Numerical results obtained for single-objective and multiobjective optimization problems show a 16-22 % reduction in vibratory hub loads for a nonuniform-blade with six elastic stiffness design variables. The multiobjective optimization problem based on the min-max method reduces the vibratory hub loads by about 16% and the 1/rev and 2/rev blade root loads,which are the principal cause of dynamic stresses, by about 18 and 31 %, respectively. The OA-based metamodels provide an efficient and interactive approach to perform preliminary design studies using comprehensive simulation codes and is suitable for use in an industrial setting.
Item Type: | Journal Article |
---|---|
Publication: | AIAA Journal |
Publisher: | American Institute of Aeronautics and Astronautics |
Additional Information: | Copyright of this article belongs to American Institute of Aeronautics and Astronautics. |
Keywords: | blades;elastic constants;elasticity;finite element analysis; helicopters;minimax techniques;polynomials;response surface methodology;rotors;time-domain analysis;vibrations |
Department/Centre: | Division of Mechanical Sciences > Aerospace Engineering(Formerly Aeronautical Engineering) |
Date Deposited: | 28 Jan 2008 |
Last Modified: | 17 Jan 2012 05:04 |
URI: | http://eprints.iisc.ac.in/id/eprint/11256 |
Actions (login required)
![]() |
View Item |