ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Microstructural Evolution and Mechanical Properties of Direct Metal Laser-Sintered (DMLS) CoCrMo After Heat Treatment

Bawane, Kaustubh Krishna and Srinivasan, Dheepa and Banerjee, Dipankar (2018) Microstructural Evolution and Mechanical Properties of Direct Metal Laser-Sintered (DMLS) CoCrMo After Heat Treatment. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (9, SI). pp. 3793-3811.

[img] PDF
Mat_Mat_Tra-A_49A-9_3793_2018.pdf - Published Version
Restricted to Registered users only

Download (10MB) | Request a copy
Official URL: http://dx.doi.org/ 10.1007/s11661-018-4771-4

Abstract

Microstructures and tensile properties of Direct Metal Laser-Sintered (DMLS) CoCrMo were investigated in the as-printed condition and after heat treatment. A dense (> 99.5 pct) as-printed DMLS CoCrMo was obtained in the as-printed condition eliminating the need for any hot isostatic pressing. Solution heat treatment carried out at 1150 degrees C revealed complete recrystallization resulting in an equiaxed grain structure with an average grain size of 40 mu m. The microstructure after solution heat treatment and aging at 980 degrees C revealed inter and intragranular precipitations, enriched in Mo and Si. Solution treatment resulted in the decrease of the room-temperature tensile strength from 1378 MPa (as-printed) to 1114 MPa, which was attributed to the increasing grain size from 0.6 to 1 mu m (column width) to similar to 40 mu m (grain size). The decrease in yield strength was accompanied by the increasing ductility from 5.7 to 15 pct. An enhancement in ductility to nearly 25 pct was observed in tensile tests at 925 degrees C. This paper comprises a detailed microstructural evaluation of DMLS CoCrMo alloy to determine its suitability for high-temperature structural applications involving repair and refurbishment of components, including an evaluation of microstructural and tensile properties after welding the DMLS CoCrMo to cast FSX414.

Item Type: Journal Article
Additional Information: Copy right for this article belong to SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA
Department/Centre: Division of Mechanical Sciences > Materials Engineering (formerly Metallurgy)
Depositing User: Id for Latest eprints
Date Deposited: 28 Aug 2018 15:17
Last Modified: 28 Aug 2018 15:17
URI: http://eprints.iisc.ac.in/id/eprint/60512

Actions (login required)

View Item View Item