ePrints@IIScePrints@IISc Home | About | Browse | Latest Additions | Advanced Search | Contact | Help

Experimental investigation of fluid flow in long rectangular micro-channels

Rathnasamy, R and Arakeri, JH and Srinivasan, K (2005) Experimental investigation of fluid flow in long rectangular micro-channels. In: Proceedings of the institution of Mechanical Engineers Part E-Journal of Process Mechnical Engineering, 219 (E3). pp. 227-235.

Full text not available from this repository. (Request a copy)


The objective of this paper is to report new data for flow of gases,liquids, and liquid mixtures in 11 m long micro-channels. Three test sections of the following dimensions (a) 1.5 nun deep x 0.75 mm. wide(MC1), (b) 0.5 mm deep x 0.95 mm wide (MC2), and (c) 0.3 mm deep x 1.0mm wide (MC3) were cut in a serpentine form on a stainless steel substrate. The gases studied were air, nitrogen, and oxygen. The liquids used were ethanol, methanol, and their mixtures. The measured flow rate and pressure drop were used to evaluate friction factors in the micro-channels. Analysis of friction factor versus Reynolds number relation shows a perceptible dependence on channel dimensions.Transitions to turbulent regime were identified by a change in slope of friction factor versus Reynolds number curve. Transitions were mild and occurred at lower Reynolds numbers than in normal channels. The results are interpreted in terms of a channel geometry parameter.

Item Type: Journal Article
Additional Information: Copyright for this article belongs to Professional Engineering Publishing Ltd.
Department/Centre: Division of Mechanical Sciences > Mechanical Engineering
Depositing User: B.S Priyanka
Date Deposited: 24 Nov 2005
Last Modified: 27 Aug 2008 11:34
URI: http://eprints.iisc.ac.in/id/eprint/4139

Actions (login required)

View Item View Item