|
 | Up a level |
Surendra, KVN and Simha, KRY (2015) Characterization of friction at three contact pairs by photoelastic Isotropic point (IP). In: International Conference on Experimental Mechanics, NOV 15-17, 2014, Singapore, SINGAPORE.
Shrikanth, V and Simha, KRY and Bobji, MS (2015) Frictional force measurement during stick-slip motion of a piezoelectric walker. In: IEEE International Conference on Industrial Technology (ICIT), MAR 17-19, 2015, Seville, SPAIN, pp. 1463-1468.
Surendra, KVN and Simha, KRY (2014) Mixed Mode Analysis of Obliquely Oriented Edge Cracked Semicircular Disk Under Compression. In: International Conference on Energy, Environment and Materials Engineering (EEME), FEB 22-23, 2014, Shenzhen, PEOPLES R CHINA, pp. 882-886.
Chaturvedi, R and Trikha, M and Simha, KRY (2020) Impact Penetration through Spacecraft Honeycomb panels Analytical, Numerical and Experimental Study. In: 6th International Conference on Recent Advances in Composite Materials, 25 - 28 February 2019, Varanasi; India, pp. 1050-1058.
Ramesh, M and Simha, KRY and Kailas, Satish V (2006) High Frequency Fretting Fatigue in Cylinders. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.
Jain, Rajeev and Ramachandra, K and Simha, KRY (2004) Impact on spinning discs. In: Eighth International Symposium on Plasticity and Impact Mechanics (IMPLAST 2003), MAR 16-19, 2003, New Delhi, INDIA.
Reddy, BS and Simha, KRY and Ghosal, A (1999) Free and forced vibration of a kinked cantilever beam. In: ASME 1999 Design Engineering Technical Conferences, DETC 1999, 12-16 Sep 1999, Las Vegas; United States, pp. 169-177.
Simha, KRY (1996) Effect of open joint on stress wave propagation. In: 5th International Symposium on Rock Fragmentation by Blasting (FRAGBLAST-5), AUG 25-29, 1996, MONTREAL, CANADA,.
Tonannavar, S and Shivakumar, ND and Simha, KRY and Shrikanth, V and Bhole, K (2023) Indentation and Fragmentation of Wood Under Low-Speed Impact. In: Journal of Dynamic Behavior of Materials .
M, Muthukumar and Bobji, MS and Simha, KRY (2022) Cone cracks in tissue-mimicking hydrogels during hypodermic needle insertion: the role of water content. In: Soft Matter, 18 . pp. 3521-3530. ISSN 1744-683X
Tonannavar, S and Shivakumar, ND and Simha, KRY and Chauhan, SS and Bhole, K (2021) Quality Assessment of Artocarpus heterophyllus Log Using Nondestructive Evaluation Techniques. In: Journal of Nondestructive Evaluation, 40 (2).
Muthukumar, M and Bobji, MS and Simha, KRY (2021) Needle insertion-induced quasiperiodic cone cracks in hydrogel. In: Soft Matter, 17 (10). pp. 2823-2831.
Chaturvedi, Rajeev and Trikha, Manish and Simha, KRY (2019) Theoretical and numerical analysis of stepped disk spring. In: THIN-WALLED STRUCTURES, 136 . pp. 162-174.
Upadhyay, AK and Ramdas, C and Simha, KRY (2018) Response of cylindrical tube under blast: Experiment and numerical simulation. In: International Journal of Materials and Structural Integrity, 12 (4). pp. 339-352.
Gotkhindi, Tejas P and Simha, KRY (2015) In-plane effective shear modulus of generalized circular honeycomb structures and bundled tubes in a diamond array structure. In: INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 101 . pp. 292-308.
Gotkhindi, Tejas P and Simha, KRY (2015) In-plane elastic responses of circular cell honeycombs and bundled circular tubes in a diamond array structure. In: COMPOSITE STRUCTURES, 134 . pp. 311-330.
Surendra, KVN and Simha, KRY (2014) Analysis of cracked and un-cracked semicircular rings under symmetric loading. In: ENGINEERING FRACTURE MECHANICS, 128 . pp. 69-90.
Surendra, KVN and Simha, KRY (2014) Characterizing Frictional Contact Loading via Isochromatics. In: EXPERIMENTAL MECHANICS, 54 (6). pp. 1011-1030.
Chaudhry, V and Simha, KRY and Kailas, Satish V (2014) Energy based approach for the evaluation of damage under partial slip and gross sliding condition. In: WEAR, 315 (1-2). pp. 115-124.
Gotkhindi, Tejas P and Simha, KRY (2014) Transverse orthotropic elastic moduli of bundled coated thin elliptical tubes. In: COMPOSITE STRUCTURES, 118 . pp. 178-199.
Surendra, KVN and Simha, KRY (2013) Synthesis and application of weight function for edge cracked semicircular disk (ECSD). In: Engineering Fracture Mechanics, 107 . pp. 61-79.
Surendra, KVN and Simha, KRY (2013) Design and analysis of novel compression fracture specimen with constant form factor: Edge cracked semicircular disk (ECSD). In: Engineering Fracture Mechanics, 102 . pp. 235-248.
Gotkhindi, Tejas P and Simha, KRY (2013) Transverse elastic response of bundled coated cylinders. In: INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 76 . pp. 70-85.
Ramesh, M and Simha, KRY (2008) Cylindrical crack vis a vis parallel crack pair: shielding, energetics and asymptotics. In: International Journal Of Fracture, 152 (2). pp. 75-95.
Ramesh, M and Kailas, Satish V and Simha, KRY (2008) Axisymmetric fretting analysis in coated cylinder. In: Sadhana, 33 (3). pp. 299-327.
Simha, KRY and Pottirayil, Anirudhan and Menezes, Pradeep L and Kailas, Satish V (2008) Friction tensor concept for textured surfaces. In: Sadhana, 33 (3). pp. 203-206.
Ramesh, M and Kailas, Satish V and Simha, KRY (2008) Micro and macro contact mechanics for interacting asperities. In: Sadhana, 33 (3). pp. 329-338.
Ramesh, M and Kailas, Satish V and Simha, KRY (2008) Near surface stress analysis strategies for axisymmetric fretting. In: Sadhana, 33 (3). pp. 273-297.
Shankara, A and Menezes, Pradeep L and Simha, KRY and Kailas, Satish V (2008) Study of solid lubrication with $MoS_2$ coating in the presence of additives using reciprocating ball-on-flat scratch tester. In: Sadhana, 33 (3). pp. 207-220.
Ramesh, M and Kailas, Satish V and Simha, KRY (2008) Wave propagation in coated cylinders with reference to fretting fatigue. In: Sadhana, 33 (3). pp. 339-356.
Upadhyay, Anil Kumar and Simha, KRY (2007) Equivalent homogeneous variable depth beams for cracked FGM beams;Compliance approach. In: INTERNATIONAL JOURNAL OF FRACTURE, 144 (3). pp. 209-213.
Prasad, PBN and Simha, KRY (2004) Disc analogy for approaching circular arc cracks. In: International Journal of Fracture, 125 (1-2). 51 -71.
Prasad, PBN and Simha, KRY (2003) Interface crack around circular inclusion: SIF, kinking, debonding energetics. In: Engineering Fracture Mechanics, 70 (2). pp. 285-307.
Prasad, PBN and Simha, KRY (2002) Interactions of interfacial arc cracks. In: International Journal of Fracture, 117 (1). pp. 39-62.
Boniface, V and Simha, KRY (2001) Suppression of complex singularity using wedge interphase in interface fracture. In: International Journal of Solids and Structures, 38 (30-31). pp. 5411-5420.
Jain, Rajeev and Ramachandra, K and Simha, KRY (2000) Singularity in rotating orthotropic discs and shells. In: International Journal of Solids and Structures, 37 (14). pp. 2035-2058.
Boniface, V and Simha, KRY (1999) Re-examination of crack opening model of interface fracture. In: Engineering Fracture Mechanics, 64 (6). pp. 677-691.
Jain, Rajeev and Ramachandra, K and Simha, KRY (1999) Rotating anisotropic disc of uniform strength. In: International Journal of Mechanical Sciences, 41 (6). 639-648 .
Reddy, BSY and Simha, KRY and Ghosal, A (1999) Free vibration of a kinked cantilever with attached masses. In: Journal of The Acoustical Society of America, 105 (1). pp. 164-173.
Simha, KRY and Mohapatra, SS (1998) Stress concentration around irregular holes using complex variable method. In: Sadhana, 23 (4). pp. 393-412.
Amarnath, S and Simha, KRY (1998) Tomographic data acquisition in axisymmetric specimens. In: Experimental Techniques, 22 (2). pp. 21-25.
Boniface, V and Simha, KRY (1997) Invariant points on energy contours around a crack tip under mixed mode loading. In: International Journal of Fracture, 86 (4). pp. 301-325.
Amarnath, S and Simha, KRY (1996) Torsion of half-space with lined cylindrical hole. In: Mechanics Research Communications, 23 (3). pp. 267-275.
Arora, PR and Simha, KRY (1996) Analytical and Experimental Evaluation of Coldworking Process for Strain Hardening Materials. In: Engineering Fracture Mechanics, 53 (3). pp. 371-385.
Marur, PR and Nair, PS and Simha, KRY (1996) Two Degrees of Freedom Modeling of Precracked Beams under Impact. In: Engineering Fracture Mechanics, 53 (3). pp. 481-491.
Boniface, V and Simha, KRY (1995) Plastic energy dissipation in mixed-mode fracture. In: International Journal of Fracture, 73 (1). R3-R8.
Simha, KRY and Jain, Rajeev and Ramachandra, K (1994) Variable density approach for rotating shallow shell of variable thickness. In: International Journal of Solids and Structures, 31 (6). pp. 849-863.
Marur, PR and Simha, KRY and Nair, PS (1994) Dynamic analysis of three point bend specimens under impact. In: International journal of fracture, 68 (3). pp. 261-273.
Marur, PR and Nair, PS and Simha, KRY (1994) Influence of anvil supports and overhangs in dynamic analysis of three point bend testing. In: International journal of fracture, 69 (3). R57 -R62.
Simha, KRY and Hande, HSS and Arora, PR (1993) Monitoring Fatigue Crack Propagation in Compact Tension Specimens via Remote Sensing of Back Face Strain. In: Journal of Testing and Evaluation, 21 (1). pp. 3-8.
Amarnath, S and Simha, KRY and Srinath, LS and Godbole, PB (1992) An integrated retardation method for an axisymmetric thermoelastic problem. In: Journal of Thermal Stresses, 15 (1). pp. 39-52.
Boniface, V and Simha, KRY (1991) A plastic zone model of mixed mode fracture. In: International Journal of Fracture, 48 (1). R9-R12.
Simha, KRY (2021) Earthyroid Storms: Brewing Cyclones, Megaquakes and Tsunamis? In: Journal of the Geological Society of India, 97 (2). p. 214.
Prasad, PBN and Simha, KRY (2002) Energy released during arc crack propagation. In: International Journal of Fracture, 116 (1). L3-L8 .
