|
 | Up a level |
Prakasan, K and Seshan, S (1998) Microstructure and mechanical properties of squeeze-cast copper. In: One Hundred First Annual Meeting of the American Foundrymen's Society, 20-23 Apr. 1997, Seattle, Washington.
Guruprasad, A and Sudhakar, A and Seshan, S and Muthukumarasamy, S (1996) Structure and properties of zinc alloy based metal matrix composites. In: Symposium on Processing and Fabrication of Advanced Materials IV, 29 Oct.-2 Nov. 1995, Cleveland, Ohio; USA.
Jayalakshmi, S and Singh, RA and Chen, X and Konovalov, S and Srivatsan, TS and Seshan, S and Gupta, M (2020) Role of Matrix Microstructure in Governing the Mechanical Behavior and Corrosion Response of Two Magnesium Alloy Metal Matrix Composites. In: JOM, 72 (8). pp. 2880-2891.
Jayalakshmi, S and Kailas, SV and Seshan, S and Kim, KB and Fleury, E (2006) Tensile strength and fracture toughness of two magnesium metal matrix composites. In: Journal of Ceramic Processing Research, 7 (3). pp. 261-265.
Jayamathy, M and Kailas, SV and Kumar, K and Seshan, S and Srivatsan, TS (2005) The compressive deformation and impact response of a magnesium alloy: influence of reinforcement. In: Materials Science & Engineering, A, 393 (1-2). pp. 27-35.
Jayalakshmi, S and Kailas, SV and Seshan, S and Kumar, K and Srivatsan, TS (2005) Damage Tolerant Magnesium Metal Matrix Composites: Influence of Reinforcement and Processing. In: Materials and Manufacturing Processes, 20 (5). pp. 747-760.
Jayamathy, M and Seshan, S and Kailas, SV and Kumar, K and Srivatsan, TS (2005) Influence of Reinforcement and Processing on the Wear Response of Two Magnesium Alloys. In: Materials and Manufacturing Processes, 20 (2). pp. 255-271.
Jayamathy, M and Seshan, S and Kailas, SV and Kumar, K and Srivatsan, TS (2004) Influence of reinforcement on microstructure and mechanical response of a magnesium alloy. In: Current Science, 87 (9). pp. 1218-1231.
Jayalakshmi, S and Seshan, S and Kailas, SV and Kumar, K and Srivatsan, S (2004) Influence of processing and reinforcement on microstructure and impact behavior of magnesium alloy AM100. In: Sadhana, 29 (5). pp. 509-523.
Seshan, S and Jayamathy, M and Kailas, SV and Srivatsan, TS (2003) The tensile behavior of two magnesium alloys reinforced with silicon carbide particulates. In: Materials Science and Engineering A, 363 (1-2). pp. 345-351.
Jayalakshmi, S and Kailas, SV and Seshan, S (2003) Properties of squeeze cast Mg-10Al-Mn alloy and its alumina short fibre composites. In: Journal of Materials Science, 38 (7). pp. 1383-1389.
Jayalakshmi, S and Kailas, SV and Seshan, S (2002) Tensile behaviour of squeeze cast AM100 magnesium alloy and its $Al_2O_3$ fibre reinforced composites. In: Composites Part A: Applied Science and Manufacturing, 33 (8). pp. 1135-1140.
Jayalakshmi, S and Kailas, Satish V and Seshan, S and Fleury, E (2000) Properties of squeeze cast Mg-6Zn-3Cu alloy and its saffil alumina short fibre reinforced composites. In: Journal Of Materials Science, 41 (12). pp. 3743-3752.
Rani, RM and Seshan, S (1998) Studies on abrasive jet machining through statistical design of experiments. In: Experimental Techniques, 22 (02). pp. 28-30.
Prakasan, K and Seshan, S (1997) Electrical conductivity of squeeze cast copper. In: Journal of Materials Science Letters, 16 (19). pp. 1588-1589.
Buni, SY and Raman, N and Seshan, S (1997) Effect of spatial distribution of graphite and matrix on dry sliding wear of cast irons. In: Materials Science and Technology, 13 (9). pp. 749-753.
Prakasan, K and Palaniappan, S and Seshan, S (1997) Thermal expansion characteristics of cast Cu based metal matrix composites. In: Composites Part A, 28A (12). pp. 1019-1022.
Muthukumarasamy, S and Guruprasad, A and Sudhakar, A and Seshan, S (1996) The Performance of Zinc Alloy Based Metal Matrix Composites Produced Through Squeeze Casting. In: Materials and Manufacturing Processes, 11 (3). pp. 351-366.
Rani, MR and Seshan, S (1996) Abrasive Jet Machining - Process variables and current applications. In: Metals Materials and Processes, 7 (4). pp. 279-289.
Buni, SY and Raman, N and Seshan, S (1996) Effect of structural features on erosion resistance of cast irons. In: Tribology Letters, 2 (1). 99 - 111.
Muthukumarasamy, S and Seshan, S (1996) Structure and properties of fibre reinforced zn-27% al alloy based cast MMCs. In: Composites, 26 (5). pp. 387-393.
Buni, SY and Raman, N and Seshan, S (1995) Characterization of cast irons for optimum performance by overall rating method. In: Metals Materials and Processes, 7 (2). pp. 93-97.
Guruprasad, A and Sudhakar, A and Seshan, S (1995) Production and properties of carbon fibre/particle reinforced cast metal matrix composites. In: Metals Materials and Processes, 7 (2). pp. 99-106.
Muthukamarasamy, S and Seshan, S (1993) Microstructural features of ZA-27 alloy based particulate reinforced metal matrix composites. In: Metals Materials and Processes, 5 (2). pp. 107-110.
Buni, Yusuf S and Raman, N and Seshan, S (1993) Wear characteristics of different types of cast iron. In: Metals Materials and Processes, 5 (2). pp. 111-117.
Seshan, S and Kaneko, Junichi (1992) Advanced Materials Through Mechanical Alloying: A Retrospective Review. In: Advanced Composite Materials, 2 (2). pp. 153-170.
Seshan, S and Srivatsan, TS (1990) Casting Aluminium-Lithium Alloys in Open Atmosphere. In: Materials and Manufacturing Processes, 5 (1). 109 - 119.
Chandrapa, KG and Muralidhara, MK and Muralidhara, BK and Seshan, S (1989) Physical and thermal properties of sodium silicate-bonded self-setting sands. In: Fonderie-Fondeur d'Aujourd'hui, 83 . pp. 25-34.
Murthy, VSR and Seshan, S and Kishore, * (1987) Fractographic features of C.G.iron subjected to tension and fatigue. In: Microstructural Sciences, 15 . pp. 123-138.
Murthy, VSR and Kishore, * and Seshan, S (1986) Morphology Of Flake, Ductile And Compacted Graphite. In: Journal of Metals, 38 (12). pp. 24-28.
Seshan, S and Vijayalakshmi, D (1986) Heat pipes-concepts, materials and applications. In: Energy Conversion and Management, 26 (1). 1 -9.
Murthy, VSR and Seshan, S and Seshan, K (1985) Vermicular graphite cast iron current state of the art. In: Sadhana-Academy Proceedings in Engineering Sciences, 8 (Octobe). pp. 361-372.
Murthy, VSR and Seshan, S and Kishore, * (1984) Characteristics of compacted graphite cast iron. In: Transactions of the American Foundrymen's Society, 92 . pp. 373-380.
Muralidhara, MK and Seshan, S and Muralidhara, BK (1983) Measuring knockout property of sand molds with present sand testing equipment. In: Transactions of the American Foundrymen's Society, 91 . pp. 765-768.
Rohatgi, PK and Satyanarayana, KG and Cheriyan, J and Nagaraj, B and Sastri, P and Seshan, S (1981) Research and Production Imperatives in Aluminum Towards the Year 2000. In: Journal of Scientific & Industrial Research, 40 (2). pp. 99-109.
Jose, M and Nagaraj, B and Seshan, S and Rohatgi, PK (1980) Extent of weight-reduction possible in automobiles. In: Journal of Scientific & Industrial Research (JSIR), 39 (8). pp. 434-440.
Radhakrishnan, K and Seshan, S and Seshadri, MR (1981) Effect Of Porosity On Mechanical-Properties Of Aluminum-Alloy Castings. In: Transactions of the Indian Institute of Metals, 34 (2). pp. 169-171.
