|
 | Up a level |
Dasgupta, Samunder and Ravisekhar, K and Jagadishkumar, MN and Sankaran, S and Prasad, V (2007) Challenges in electrical characterization of light weight polymer composites for electronic packing applications. In: International Conference on Polymeric Materials in Power Engineering ICPMPE, 4-6 October 2007, Bangalore.
Dixit, S and Dash, BB and Kumar, D and Bhattacharjee, A and Sankaran, S (2023) Influence of phase morphology, static recrystallization, and crystallographic texture on room temperature tensile properties of Ti–6Al–4V alloy: Comparison between post-tested equiaxed, bimodal, and lamellar microstructures. In: Materials Science and Engineering A, 873 .
Bian, B and Taheriniya, S and Muralikrishna, GM and Godha, A and Makineni, SK and Sankaran, S and Straumal, BB and Du, Y and Wilde, G and Divinski, SV (2023) Kinetic and structural insights into the grain boundary phase transitions in Ni-Bi alloys. In: Acta Materialia, 245 .
Dixit, S and Kumar, D and Dash, BB and Suwas, S and Bhattacharjee, A and Sankaran, S (2022) Effect of solutionizing temperature and cooling rate on phase morphology, recrystallization and texture evolution in a heat treated Ti‐6Al‐4Valloy having different types of microstructure. In: Journal of Alloys and Compounds, 927 .
Sankaran, S and Madhavan, R and Suwas, S and Ray, RK and Padmanabhan, KA (2022) Microstructural evolution and stability during strain-controlled fatigue in a multiphase microalloyed steel. In: Materials Science and Engineering A, 861 .
Loganathan, S and Sankaran, S (2021) Surface chemical and selective flocculation studies on iron oxide and silica suspensions in the presence of xanthan gum. In: Minerals Engineering, 160 .
Majumder, S and Das, A and Kushal, A and Sankaran, S and Guttal, V (2021) Finite-size effects, demographic noise, and ecosystem dynamics. In: European Physical Journal: Special Topics .
Anand, N and Sankaran, S and Madhavan, R and Suwas, Satyam and Venugopal, P (2015) Microstructural Dependence of Work Hardening Behavior in Martensite-Ferrite Microalloyed Steels. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 24 (1). pp. 517-528.
Sekhar, Ravi K and Kishore, * and Sankaran, S (2008) Cure Behavior of Epoxy-Cyanate Ester Blend in Composite Systems: Evaluation Studies in Neat Resin Cast by Thermal and FTIR Techniques. In: Journal of Applied Polymer Science, 109 (3). pp. 2023-2028.
Karthikeyan, CS and Sankaran, S and Kishore, * (2007) Investigation of bending modulus of fiber-reinforced syntactic foams for sandwich and structural applications. In: Polymers for Advanced Technologies, 18 (3). pp. 254-256.
Kishore, * and Shankar, Ravi and Sankaran, S (2006) Effects of microballoons’ size and content in epoxy on compressive strength and modulus. In: Journal of Materials Science, 41 (22). pp. 7459-7465.
Kishore, * and Shankar, Ravi and Sankaran, S (2005) Gradient syntactic foams: Tensile strength, modulus and fractographic features. In: Materials Science and Engineering: A, 412 (1&2). pp. 153-158.
Kishore, * and Shankar, Ravi and Sankaran, S (2005) Short Beam Three Point Bend Tests in Syntactic Foams. Part I: Microscopic Characterization of the Failure Zones. In: Journal of Applied Polymer Science, 98 (2). pp. 673-679.
Kishore, * and Shankar, Ravi and Sankaran, S (2005) Short-Beam Three-Point Bend Test Study in Syntactic Foam. Part III: Effects of Interface Modification on Strength and Fractographic Features. In: Journal of Applied Polymer Science, 98 . pp. 687-693.
Kishore, * and Shankar, Ravi and Sankaran, S (2005) Short-Beam Three-Point Bend Tests in Syntactic Foams. Part II: Effect of Microballoons Content on Shear Strength. In: Journal of Applied Polymer Science, 98 . pp. 680-686.
Karthikeyan, CS and Sankaran, S and Kishore, * (2004) Elastic behaviour of plain and fibre-reinforced syntactic foams under compression. In: Materials Letters, 58 (6). pp. 995-999.
Karthikeyan, CS and Sankaran, S and Kumar, Jagdish MN and Kishore, * (2001) Processing and compressive strengths of syntactic foams with and without fibrous reinforcements. In: Journal of Applied Polymer Science, 81 (2). 405 -411.
Karthikeyan, CS and Kishore, * and Sankaran, S (2001) Effect of absorption in aqueous and hygrothermal media on the compressive properties of glass fiber reinforced syntactic foam. In: Journal of Reinforced Plastics and Composites, 20 (11). pp. 982-993.
Gupta, N and Sankaran, S and Woldesenbet, E and Kishore, * (2001) Studies on compressive failure features in syntactic foam material. In: Journal of Materials Science, 36 (18). pp. 4485-4491.
Karthikeyan, CS and Kishore, * and Sankaran, S (2000) Comparison of compressive properties of fiber-free and fiber-bearing syntactic foams. In: Journal of Reinforced Plastics and Composites, 19 (9). pp. 732-742.
Karthikeyan, CS and Sankaran, S and Kishore, * (2000) Influence of chopped strand fibres on the flexural behaviour of a syntactic foam core system. In: Polymer International, 49 (2). pp. 158-162.
Gupta, Nikhil and Karthikeyan, CS and Sankaran, S and Kishore, * (1999) Correlation of Processing Methodology to the Physical and Mechanical Properties of Syntactic Foams With and Without Fibers. In: Materials Characterization, 43 (4). pp. 271-277.
Gupta, Nikhil and Kishore, * and Sankaran, S (1999) On the characterisation of syntactic foam core sandwich composites for compressive properties. In: Journal of Reinforced Plastics and Composites, 18 (14). pp. 1347-1357.
Sankaran, S and Chanda, Manas (1990) Chemical toughening of epoxies. II. Mechanical, thermal, and microscopic studies of epoxies toughened with hydroxyl-terminated poly(butadiene-co-acrylonitrile). In: Journal of Applied Polymer Science, 39 (8). pp. 1635-1647.
Sankaran, S and Chanda, Manas (1990) Chemical toughening of epoxies. I. Structural modification of epoxy resins by reaction with hydroxy-terminated poly (butadiene-co-acrylonitrile). In: Journal of Applied Polymer Science, 39 (7). pp. 14591-1466.
Sankaran, S and Chanda, Manas (1990) Chemical toughening of epoxies. I. Structural modification of epoxy resins by reaction with hydroxy-terminated poly(butadiene-co-acrylonitrile). In: Journal of Applied Polymer Science, 39 (7). pp. 1459-1466.
