|
 | Up a level |
Ravi, R and Prasad, YVRK and Sarma, VVS (2006) Artificial Neural Network Models to Predict workability parameters for Dynamic recrystallisation domain and Instability regimes. In: International Workshop on Neural Network and Genetic Algorithm in Material Science and Engineering (NGMS-2006), January 11-13, 2006, Bengal Engineering and Science University,, 2006, Shibpur, Howrah, India.
Sarkar, J and Prasad, YVRK and Surappa, MK (1993) The constitutive flow behavior of 6061Al-SiCp composites at elevated temperature. In: International Conference on Composite Material, 1993, pp. 240-246.
Sivakesavam, O and Prasad, YVRK (2022) Influence of homogenization on the processing map for hot working of as-cast Mg-2Zn-1Mn alloy. In: International Journal of Materials Research, 94 (11). pp. 1255-1259.
Srinivasan, N and Prasad, YVRK and Rao, P Rama (2008) Hot deformation behaviour of Mg–3Al alloy—A study using processing map. In: Materials Science and Engineering A, 476 (1-2). pp. 146-156.
Ravi, R and Prasad, YVRK and Sarma, VVS (2007) An Artificial Neural Network (ANN) Model for Predicting Instability Regimes in Copper-Aluminum Alloys. In: Materials and Manufacturing Processes, 22 (7). 846 -850.
Chakravartty, JK and Kapoor, R and Banerjee, S and Prasad, YVRK (2007) Characterization of hot deformation behavior of Zr-1Nb-1Sn alloy. In: Journal of Nuclear Materials, 362 (1). pp. 75-86.
Ravi, R and Prasad, YVRK and Sarma, VVS and Raidu, RS (2006) Artificial neural network model for predicting stable and unstable regions in Cu-Zn alloys. In: Materials and Manufacturing Processes, 21 (8). pp. 756-760.
Sivaprasad, PV and Mannan, SL and Prasad, YVRK (2004) Processing Parameters for the Mechanical Working of 9 Cr-1 Mo Steel: Processing Maps Approach. In: Materials Science and Technology, 20 (12). pp. 1545-1550.
Sivakesavam, O and Prasad, YVRK (2003) Hot deformation behaviour of as-cast Mg-2Zn-1Mn alloy in compression: a study with processing map. In: Materials Science and Engineering A, 362 (1-2). pp. 118-124.
Ravi, R and Prasad, YVRK and Sarma, VVS (2003) Development of Expert Systems for the Design of a Hot-Forging Process Based on Material Workability. In: Journal of Materials Engineering and Performance, 12 (6). pp. 646-652.
Prasad, YVRK (2003) Processing Maps: A Status Report. In: Journal of Materials Engineering and Performance, 12 (6). pp. 638-645.
Sivakesavam, O and Prasad, YVRK (2003) Influence of homogenization on the processing map for hot working of as-cast Mg-2Zn-1Mn alloy. In: Zeitschrift für Metallkunde, 94 (11). pp. 1255-1259.
Sundar, RS and Sastry, DH and Prasad, YVRK (2003) Hot workability of as-cast Fe3Al-2.5%Cr intermetallic alloy. In: Materials Science and Engineering A, 347 (1-2). pp. 86-92.
Sivaprasad, PV and Venugopal, S and Venugopal, Sridhar and Maduraimuthu, V and Vasudevan, M and Mannan, SL and Prasad, YVRK and Chaturvedi, RC (2003) Validation of processing maps for a 15Cr-15Ni-2.2Mo-0.3Ti austenitic stainless steel using hot forging and rolling tests. In: Journal of Materials Processing Technology, 132 (1-3). 262-268 .
Balasubrahmanyam, VV and Prasad, YVRK (2002) Deformation behaviour of beta titanium alloy Ti–10V–4.5Fe–1.5Al in hot upset forging. In: Materials Science and Engineering A, 336 (1-2). pp. 150-158.
Frazier, WG and Seshacharyulu, T and Medeiros, SC and Prasad, YVRK (2002) Control of transient thermal response during sequential open-die forging: A trajectory optimization approach. In: Journal of Manufacturing Science and Engineering, 124 (3). pp. 502-508.
Sivakesavam, O and Prasad, YVRK (2002) Characteristics of superplasticity domain in the processing map for hot working of as-cast Mg-11.5Li-1.5Al alloy. In: Materials Science and Engineering A, 323 (1-2). pp. 270-277.
Balasubrahmanyam, VV and Prasad, YVRK (2001) Hot deformation mechanisms in metastable beta titanium alloy Ti-10V-2Fe-3Al. In: Materials Science and Technology, 17 (10). pp. 1222-1228.
Prasad, YVRK and Sastry, DH and Deevi, SC (2001) Hot working behavior of extruded powder products of B2 iron aluminide alloys. In: Materials Science and Engineering A, 311 (1-2). pp. 42-53.
Prasad, YVRK and Seshacharyulu, T and Medeiros, SC and Frazier, WG (2001) A Study of Beta Processing of Ti-6Al-4V: Is it Trivial? In: Journal of Engineering Materials and Technology, 123 (3). pp. 355-360.
Sastry, DH and Prasad, YVRK and Deevi, SC (2001) Influence of temperature and strain rate on the flow stress of an FeAl alloy. In: Materials Science and Engineering A, 299 (1-2). 157 -163.
Prasad, YVRK and Sasidhara, S and Sikka, VK (2000) Characterization of mechanisms of hot deformation of as-cast nickel aluminide alloy. In: Intermetallics, 8 (9-11). pp. 987-995.
Prasad, YVRK and Sastry, DH and Deevi, SC (2000) Processing maps for hot working of a P/M iron aluminide alloy. In: Intermetallics, 8 (9-11). pp. 1067-1074.
Sundar, RS and Baligidad, RG and Prasad, YVRK and Sastry, DH (1998) Processing of iron aluminides. In: Materials Science and Engineering A, 258 (1-2). pp. 219-228.
Sagar, PK and Prasad, YVRK (1998) Hot deformation and microstructural evolution in an alpha(2)/O titanium aluminide alloy Ti-25Al-15Nb. In: Zeitschrift für Metallkunde, 89 (6). pp. 433-441.
Narayan, SP and Basu, K and Prasad, YVRK and Jayaram, V and Das, BN (1998) A study of the formability of melt spun Nd-Fe-B magnets. In: Scripta Materialia, 38 (11). pp. 1725-1730.
Somani, MC and Muraleedharan, K and Prasad, YVRK and Singh, V (1998) Mechanical processing and microstructural control in hot working of hot isostatically pressed P/M IN-100 superalloy. In: Materials Science and Engineering A, 245 (01). pp. 88-99.
Prasad, YVRK and Seshacharyulu, T (1998) Processing maps for hot working of titanium alloys. In: Materials Science and Engineering A, 243 (1-2). pp. 82-88.
Prasad, YVRK and Seshacharyulu, T (1998) Modelling of hot deformation for microstructural control. In: International Materials Reviews, 43 (6). pp. 243-258.
Krishna, Gopala V and Prasad, YVRK and Birla, NC and Rao, Sambasiva G (1997) Processing map for the hot working of near-alpha titanium alloy 685. In: Journal of Materials Processing Technology, 71 (3). pp. 377-383.
Sagar, PK and Banerjee, D and Prasad, YVRK (1997) Unstable flow during hot deformation of Ti-24Al-20Nb alloy. In: Materials Science and Technology, 13 (9). pp. 755-760.
Venugopal, S and Mannan, SL and Prasad, YVRK (1997) Instability map for cold and warm working of as-cast 304 stainless steel. In: Journal of Materials Processing Technology, 65 (1-3). pp. 107-115.
Venugopal, S and Mannan, SL and Prasad, YVRK (1997) On the modelling of grain size during hot working of stainless steels type AISI 304 and 316. In: Journal of Materials Science Letters, 16 (2). pp. 137-142.
Venugopal, S and Vasudevan, M and Venugopal, Sridhar and Sivaprasad, PV and Jha, SK and Pandey, P and Mannan, SL and Prasad, YVRK (1996) Industrial validation of processing maps of 316L stainless steel using hot forging, rolling, and extrusion. In: Materials Science and Technology, 12 (11). pp. 955-962.
Chakravartty, JK and Dey, GK and Banerjee, S and Prasad, YVRK (1996) Dynamic recrystallisation during hot working of Zr-2 center dot 5Nb: Characterisation using processing maps. In: Materials Science and Technology, 12 (9). pp. 705-716.
Sagar, PK and Banerjee, D and Muraleedharan, K and Prasad, YVRK (1996) High-temperature deformation processing of Ti-24Al-20Nb. In: Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, 27 (9). pp. 2593-2604.
Venugopal, S and Venugopal, Sridhar and Sivaprasad, PV and Vasudevan, M and Mannan, SL and Jha, SK and Pandey, P and Prasad, YVRK (1996) Validation of processing maps for 304L stainless steel using hot forging, rolling and extrusion. In: Journal of Materials Processing Technology, 99 (04). pp. 343-350.
Venugopal, S and Mannan, SL and Prasad, YVRK (1996) Influence of strain rate and state-of-stress on the formation of ferrite in stainless steel type AISI 304 during hot working. In: Materials Letters, 26 (3). pp. 161-165.
Prasad, YVRK (1996) Dynamic materials model: Basis and principles - Reply. In: Metallurgical and Materials Transactions A, 27 (1). pp. 235-236.
Venugopal, S and Mannan, SL and Prasad, YVRK (1996) Optimization of cold and warm workability in 304 stainless steel using instability maps. In: Metallurgical and Materials Transactions A, 27 (1). pp. 119-126.
Venugopal, S and Tyagi, AK and Krishan, K and Mannan, SL and Prasad, YVRK (1995) Influence of carbide particles on the dynamic recrystallization of as-cast 304 stainless steel: a study using secondary ion mass spectrometric (SIMS) analysis. In: Materials Letters, 25 (5-6). pp. 245-248.
Venugopal, S and Mannan, SL and Prasad, YVRK (1995) Optimization of cold and warm workability in stainless steel type AISI 316L using instability maps. In: Journal of Nuclear Materials, 227 (1-2). pp. 1-10.
Somani, MC and Birla, NC and Prasad, YVRK and Singh, V (1995) Microstructural validation of processing maps using the hot extrusion of P/M Nimonic AP-1 superalloy. In: Journal of Materials Processing Technology, 52 (2-4). pp. 225-237.
Sarkar, J and Prasad, YVRK and Surappa, MK (1995) Optimization of hot workability of an Al-Mg-Si alloy using processing maps. In: Journal of Materials Science (full set), 30 (11). pp. 2843-2848.
Srinivasan, N and Prasad, YVRK (1995) Hot working characteristics of nimonic 75, 80A and 90 superalloys: a comparison using processing maps. In: Journal of Materials Processing Technlogy, 51 (1-4). pp. 171-192.
Chakravartty, JK and Dey, GK and Banerjee, S and Prasad, YVRK (1995) Characterization of hot deformation behaviour of Zr---2.5Nb---0.5Cu using processing maps. In: Journal of Nuclear Materials, 218 (2). pp. 247-255.
Rajaram, R and Ravichandran, N and Prasad, YVRK (1994) A study of hot deformation of Cd-1% Zn alloy using power dissipation maps. In: Zeitschrift fur Metallkunde, 85 (12). pp. 845-851.
Kailas, SV and Prasad, YVRK and Biswas, SK (1994) Flow Instabilities and fracture in Ti-6Al-4V deformed in compression at 298 K to 673 K. In: Metallurgical and materials transactions a, 25 (10). 2173-2179 .
Srinivasan, N and Prasad, YVRK (1994) Microstructural control in hot working of IN-718 superalloy using processing map. In: Metallurgical and Materials Transactions A, 25 (10). pp. 2275-2284.
Srinivasan, N and Prasad, YVRK (1994) Microstructural control in hot working of IN-718 superalloy using processing map. In: Metallurgical and Materials Transactions A, 25 (10). 2275 -2284 .
Somani, MC and Muraleedharan, K and Birla, NC and Singh, V and Prasad, YVRK (1994) Hot deformation characteristics of INCONEL alloy MA 754 and development of a processing map. In: Metallurgical and materials transactions A, 25 (8). 1693-1702 .
Radhakrishna Bhat , BV and Mahajan, YR and Roshan, HMd and Prasad, YVRK (1994) Characteristics of superplasticity domain in the processing map for hot working of an Al alloy 2014---20vol.%Al2O3 metal matrix composite. In: Materials Science and Engineering: A, 212 (1). 178-181 .
Kailas, SV and Prasad, YVRK and Biswas, SK (1994) Influence of initial texture on the microstructural instabilities during compression of commercial ?-Titanium at 25 °C to 400 °C. In: Metallurgical and Materials Transactions A, 25 (7). 1425 -1434 .
Venugopal, S and Ravishankar, C and Mannan, SL and Prasad, YVRK (1994) Comments on the paper entitled “Microstructural features of a type 304L stainless steel deformed at 1473 K in the strain rate interval 10−3 to 102 s−1”. In: Scripta Metallurgica et Materialia, 30 (12). 1611-1616 .
Venugopal, S and Ravishankar, C and Mannan, SL and Prasad, YVRK (1994) Microstructural features of a type 304L stainless steel deformed at 1473 K in the strain rate interval 10−3 to 102 s−1. In: Scripta Metallurgica et Materialia, 30 (12). 1611-1616 .
Srinivasan, N and Prasad, YVRK (1994) Processing map for hot working of Ni–16Cr–8Fe alloy (IN 600). In: Materials Science and Technology, 10 (5). 377-383 .
Sagar, PK and Banerjee, D and Prasad, YVRK (1994) Processing of an α-2 aluminide alloy, Ti---24Al---11Nb. In: Materials Science and Engineering A, 177 (1-2). pp. 185-197.
Srinivasan, N and Prasad, YVRK (1994) Hot-working characteristics of nichrome and the development of a processing map. In: Journal of Materials Processing Technology, 41 (4). pp. 409-424.
Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Processing map for cold and hot working of as-cast stainless steel type AISI 304. In: Journal of Materials Science Letters, 12 (23). pp. 1875-1878.
Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Criteria for prediction of flow instabilities and microstructural manifestations during warm working of AISI 304L stainless steel. In: Materials Science and Technology, 9 (11). pp. 1021-1030.
Kailas, SV and Prasad, YVRK and Biswas, SK (1993) Microstructural features of flow instability in α-titanium cylinders under high strain rate compression at 25°C to 400°C. In: Metallurgical Transactions. Physical Metallurgy and Material, 24 (11). pp. 2513-2520.
Padmavardhani, D and Prasad, YVRK (1993) Processing maps for hot working of Cu-Ni-Zn alloys Part II Alpha-Beta nickel silver. In: Journal of Materials Science (full set), 28 (19). pp. 5275-5279.
Padmavardhani , D and Prasad, YVRK (1993) Processing maps for hot working of Cu-Ni-Zn alloys. Part I - Alpha-nickel silver. In: Journal of Materials Science (full set), 28 (19). pp. 5269-5274.
Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Influence of cast versus wrought microstructure on the processing map for hot working of stainless steel type AISI 304. In: Materials Letters, 17 (6). pp. 388-392.
Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Processing map for hot working of stainless steel type AISI 316L. In: Materials Science and Technology, 9 (10). pp. 899-906.
Sivakesavam, O and Rao, IS and Prasad, YVRK (1993) Processing map for hot working of as cast magnesium. In: Materials Science and Technology, 9 (9). pp. 805-810.
Bhat, Radhakrishna BV and Mahajan, YR and Roshan, HMd and Prasad, YVRK (1993) Processing maps for hot-working of powder metallurgy 1100 Al-10 vol % SiC-particulate metal-matrix composite. In: Journal of Materials Science (full set), 28 (8). pp. 2141-2147.
Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Processing map for mechanical working of stainless steel type AISI 316 L. In: Scripta Metallurgica et Materialia, 28 (6). pp. 715-720.
Ravichandran, N and Prasad, YVRK (1993) Characteristics of Dynamic Recrystalization Domain in the Processing Map for Hot-Working of OFHC Coper. In: Zeitschrift für Metallkunde, 84 (2). pp. 132-139.
Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Influence of state of stress on the processing map for hot working of stainless steel type AISI 304L: compression vs. torsion. In: Materials Science and Engineering: A, 160 (1). pp. 63-69.
Padmavardhani, D and Prasad, YVRK (1993) Effect of Zirconium on the Processing MAPS For Hot-Working of Alpha-Beta Brass. In: Zeitschrift für Metallkunde, 84 (1). pp. 57-62.
Somani, MC and Rao, Bhagiradha ES and Birla, NC and Bhatia, ML and Singh, Vakil and Prasad, YVRK (1992) Processing map for controlling microstructure in hot working of hot isostatically pressed powder metallurgy NIMONIC AP-1 superalloy. In: Metallurgical Transactions. Physical Metallurgy and Material, 23 (10). pp. 2849-2857.
Padmavardhani, D and Prasad, YVRK (1992) Effect of zinc content on the processing map for hot working of α brass. In: Materials Science and Engineering: A, 157 (1). pp. 43-51.
Ravichandran, N and Prasad, YVRK (1992) Influence of oxygen on dynamic recrystallization during hot working of polycrystalline copper. In: Materials Science and Engineering A, 156 (2). pp. 195-204.
Srinivasan, N and Prasad, YVRK (1992) Influence of sulfur on the processing map for hot working of nickel. In: Scripta Metallurgica et Materialia, 27 (3). pp. 309-312.
Bhat, Radhakrishna BV and Mahajan, YR and Roshan, HMd and Prasad, YVRK (1992) Processing map for hot working of powder. In: Metallurgical Transactions. Physical Metallurgy and Material, 23 (8). pp. 2223-2230.
Chakravartty, JK and Banerjee, S and Prasad, YVRK and Asundi, MK (1992) Hot-working characteristics of Zircaloy-2 in the temperature range of 650–950°C. In: Journal of Nuclear Materials, 187 (3). pp. 260-271.
Srinivasan, N and Prasad, YVRK (1992) Characterisation of dynamic recrystallisation in nickel using processing map for hot deformation. In: Materials Science and Technology, 8 (3). pp. 206-212.
Chakravartty, JK and Banerjee, S and Prasad, YVRK (1992) Superplasticity in ?-zirconium: A study using a processing map. In: Scripta Metallurgica et Materialia, 26 (1). pp. 75-78.
Padmavardhani, D and Prasad, YVRK (1991) Characterization of hot deformation behavior of brasses using processing maps: Part II. β Brass and α-β brass. In: Metallurgical Transactions. Physical Metallurgy and Material, 22 (12). pp. 2993-3001.
Ravichandran, N and Prasad, YVRK (1991) Dynamic recrystallization during hot deformation of aluminum: A study using processing maps. In: Metallurgical and Materials Transactions A, 22 (10). pp. 2339-2348.
Prasad, YVRK and Ravichandran, N (1991) Effect of stacking fault energy on the dynamic recrystallization during hot working of FCC metals: A study using processing maps. In: Bulletin of Materials Science, 14 (5). 1241 -1248.
Padmavardhani, D and Prasad, YVRK (1991) Effect of zinc content on processing map for hot deformation of beta brass. In: Materials Science and Technology, 7 (10). pp. 947-953.
Chakravartty, JK and Prasad , YVRK and Asundi, MK (1991) Processing map for hot working of alpha-zirconium. In: Metallurgical Transactions. Physical Metallurgy and Material, 22 (4). pp. 829-836.
Rao, KP and Prasad, YVRK and Sivaram, K (1990) Deformation processing map for control of microstructure in Al---4Mg alloy. In: Materials Letters, 10 (1-2). pp. 66-70.
Prasad, YVRK (1990) Recent Advances in the Science of Mechanical processing. In: Indian Journal of Technology, 28 (6-8). pp. 435-451.
Arora, PR and Raghavan, MR and Prasad, YVRK (1988) Effect of Prestrain on Fracture Toughness of Rolled Mild Steel with Significant Inclusion Content. In: Journal of Testing and Evaluation, 16 (3). 298 -304.
Arora, PR and Raghavan, MR and Prasad, YVRK (1988) Effect of prestrain on fatigue crack propagation in mild steel containing non-metallic inclusions. In: Engineering Fracture Mechanics, 29 (1). 67 -79.
Panchapagesan, TS and Jain, NK and Prasad, YVRK (1987) Fractographic features of 2618 aluminum alloy fractured in high temperature torsion. In: Aluminium, 63 (9). pp. 910-911.
Prasad, YVRK and Gegel, HL and Doraivelu, SM and Malas, JC and Morgan, JT and Lark, KA and Barker, DR (1984) Modeling of dynamic material behavior in hot deformation: Forging of Ti-6242. In: Metallurgical and Materials Transactions A, 15 (10). pp. 1883-1892.
Jain, NK and Nair, Krishnadas CG and Abraham, KP and Prasad, YVRK (1984) Hot torsional study of electroslag refined RR 58. In: Transactions of the Indian Institute of Metals, 37 (5). pp. 493-497.
Prasad, YVRK (1984) Texture-dependent mechanical properties of metals and alloys. In: Transactions of the Indian Institute of Metals, 37 (4). pp. 399-410.
Rao, Sambasiva G and Prasad, YVRK (1983) Strengthening mechanisms in hot-rolled magnesium and magnesium alloys. In: Materials Letters, 1 (5-6). pp. 171-174.
Rao, GS and Prasad, YVRK (1983) Grain boundary strengthening in hot rolled magnesium-5 at.% thallium: Importance of texture. In: Scripta Metallurgica, 17 (1). pp. 147-151.
Rao, Sambasiva G and Prasad, YVRK (1983) Changes in texture and grain size in hot rolled magnesium and effect on yield strength. In: Bulletin of Materials Science, 5 (5). pp. 459-464.
Rao, GS and Prasad, YVRK (1983) Contribution of texture to the strengthening and fracture in hot-rolled magnesium-12.7 at % cadmium alloy. In: Journal of Materials Science, 18 (8). pp. 2385-2392.
Rao, KP and Doraivelu, SM and Roshan, HM and Prasad, YVRK (1983) Deformation processing of an aluminum alloy containing particles: Studies on AI-5 pct Si alloy 4043. In: Metallurgical and Materials Transactions A, 14 (8). pp. 1671-1679.
Sastry, Srinivas D and Rohatgi, PK and Abraham, KP and Prasad, YVRK (1982) Influence of heat treatment on the strength and fracture behaviour of Fe-12Cr-6Al ferritic stainless steel. In: Journal of Materials Science, 17 (10). pp. 3009-3016.
Yegneswaran, AH and Raman, KS and Prasad, YVRK (1982) Texture strengthening in warm-rolled cadmium-1% silver alloy. In: Philosophical Magazine A & B, 46 (3). pp. 507-519.
Yegneswaran, AH and Raman, KS and Prasad, YVRK (1982) Texture strengthening in warm-rolled cadmium-1% silver alloy. In: Philosophical Magazine A, 46 (3). pp. 507-509.
Rao, G Sambasiva and Prasad, YVRK (1982) Grain boundary strengthening in strongly textured magnesium produced by hot rolling. In: Metallurgical Transactions. Physical Metallurgy and Material, 13 (12). pp. 2219-2226.
Srinivasan, D and Sastry, * and Rohatgi, PK and Abraham, KP and Prasad, YVRK (1982) Influence of heat-treatment on the strength and fracture-behavior of fe-12cr-6al ferritic stainless-steel. In: Journal of Materials Science Letters, 17 (10). pp. 3009-3016.
Hebsur, Mohan G and Abraham, KP and Prasad, YVRK (1981) Influence of electroslag refining on the hot ductility of AISI 4340 steel in torsion. In: Journal of Mechanical Working Technology, 4 (4). pp. 341-349.
Hebsur, Mohan G and Abraham, KP and Prasad, YVRK (1980) Fatigue crack growth rates and fracture toughness in electroslag refined En 52 steel. In: International Journal of Fatigue, 2 (4). pp. 147-152.
Nayak, HV Sudhaker and Vasu, KI and Prasad, YVRK (1980) Texture dependent stress corrosion failure of commercial titanium sheets in bromine-methanol solution. In: Journal of Materials Science, 15 (5). pp. 1265-1275.
Prasad, YVRK and Rao, Rama P (1980) Alloy design for fracture resistance. In: Sadhana - Academy Proceedings in Engineering Sciences, 3 (DEC). pp. 315-331.
Hebsur, Mohan G and Abraham, KP and Prasad, YVRK (1980) Effect of electroslag refining on the fracture toughness and fatigue crack propagation rates in heat treated AISI 4340 steel. In: Engineering Fracture Mechanics, 13 (4). pp. 851-864.
Hebsur, MG and Abraham, KP and Prasad, YVRK (1980) Hot-Working Characteristics of Electroslag-Refined En52 Steel: A Hot-Torsion Study. In: Metals Technology, 7 (DEC). pp. 483-487.
Sastry, SD and Rohatgi, PK and Abraham, KP and Prasad, YVRK (1980) Preparation and Mechanical Processing of Fe -- 12Cr-6Al Ferritic Stainless Steel. In: Metals Technology, 7 (OCT). 393-396 .
Yegneswaran, AH and Raman, KS and Prasad, YVRK (1980) Texture and grain-size dependence of tensile properties in warm rolled cadmium. In: Zeitschrift für Metallkunde, 71 (4). pp. 253-259.
Sastry, Srinivas D and Rohatgi, PK and Abraham, KP and Prasad, YVRK (1979) Mechanism of strengthening in high temperature treated Fe---12Cr---6Al ferritic stainless steel. In: Scripta Metallurgica, 13 (9). pp. 817-822.
Yegneswaran, AH and Prasad, YVRK and Raman, KS (1978) Crystallographic texture and hardness in work softened and annealed cadmium — 1% silver alloy. In: Scripta Metallurgica, 12 (6). 487-492 .
Yegneswaran, AH and Prasad, YVRK and Raman, KS (1978) Effect of grain size and texture on the mechanical properties of warm worked cadmium-1.5 Pct zinc alloy. In: Metallurgical Transactions. Physical Metallurgy and Material, 9 (9). 1311-1316 .
Nayak, Sudhakar HV and Vasu, KI and Prasad, YVRK (1978) Transcrystalline stress corrosion cracking in cold rolled commercial titanium in methanol-bromine solution: Role of crystallographic texture. In: Scripta Metallurgica, 12 (10). 869-872 .
Armstronga, RW and Prasad, YVRK (1974) Polycrystal versus single-crystal strain rate sensitivity of cadmium. In: Philosophical Magazine, 29 (6). pp. 1421-1425.
Sastry, DH and Prasad, YVRK and Vasu, KI and Rao, P Rama (1973) On the orientation of grain boundaries in cadmium recrystallized during hot deformatio. In: Journal of Materials Science, 8 (10). pp. 1517-1519.
Sastry, DH and Prasad, YVRK and Vasu, KI and Rao, PR (1973) Orientation Of Grain-Boundaries In Cadmium Recrystallized During Hot Deformation. In: Journal of Materials Science, 8 (10). pp. 1517-1519.
Ramaraju, K and Prasad, YVRK and Vasu, KI (1972) Slip structure and Crack Growth during Fatigue in Aluminum and Aluminum-1% Magnesium. In: Metallography, 5 (3). pp. 265-273.
Sastry, DH and Prasad, YVRK and Vasu, KI (1971) Low-temperature deformation behaviour of polycrystalline copper. In: Journal of Materials Science, 6 (12). pp. 1433-1440.
Prasad, YVRK and Ramchandran, T (1971) Low-temperature creep in polycrystalline α-brass. In: Scripta Metallurgica, 5 (5). pp. 411-416.
Sastry, DH and Prasad, YVRK and Vasu, KI (1971) An evaluation of rate-controlling obstacles for low-temperature deformation of zirconium. In: Journal of Materials Science, 6 (4). pp. 332-341.
Prasad, YVRK and Sastry, DH and Vasu, KI (1970) Mechanism of low-temperature deformation in quenched aluminium-magnesium alloys. In: Materials Science and Engineering, 6 (5). pp. 327-333.
Prasad, YVRK and Sastry, DH and Vasu, KI (1970) Effect of Stacking-Fault Energy on Thermal Activation of Attractive Junctions in Change-in-Stress Creep of FCC Metals. In: Journal of Materials Science, 5 (6). pp. 495-506.
Prasad, YVRK and Sastry, DH and Vasu, KI (1970) On the effect of stacking fault energy on the thermal activation of attractive juntions in the low-temperature creep of F.C.C. metals. In: Scripta Metallurgica, 4 (3). pp. 219-220.
Sastry, DH and Prasad, YVRK and Vasu, KI (1969) On the low temperature deformation mechanism in polycrystalline cadmium. In: Acta Metallurgica, 17 (12). pp. 1453-1457.
Sastry, DH and Prasad, YVRK and Vasu, KI (1969) On the stacking fault energies of some close-packed hexagonal metals. In: Scripta Metallurgica, 3 (12). pp. 927-929.
Prasad, YVRK and Sastry, DH and Vasu, KI (1969) The nature of thermal activation of attractive junctions in the low-temperature creep of quenched aluminium and aluminium-magnesium alloys. In: Scripta Metallurgica, 3 (11). pp. 771-775.
Vasu, KI and Sastry, DH and Prasad, YVRK (1969) On the mechanism of plastic flow at 86°k in quenched and aged aluminum. In: Philosophical Magazine , 20 (165). pp. 629-633.
Prasad, YVRK and Sastry, DH and Vasu, KI (1969) The mechanism of hardening in quenched Al---0.5%Mg alloy at 86°K. In: Scripta Metallurgica, 3 (2). pp. 103-106.
