|
 | Up a level |
Ranganathan, S and Murty, BS and Nagarajan, R and Chattopadhyay, K (1996) Nanostructured titanium-nickel alloys: a comparison of processing routes. In: Symposium on Processing and Properties of Nanocrystalline Materials, at the Materials Week 95, 29 Oct.-2 Nov. 1995, Cleveland, Ohio; USA.
Murty, BS and Rao, Mohan M and Ranganathan, S (1993) Nanocrystalline phase formation and extension of solid solubility by mechanical alloying in Ti-based systems. In: First International Conference on Nanostructured Materials, 22-26 Sept. 1992, Cancun, Mexico, pp. 459-467.
Mishra, SR and Karati, A and Ghosh, S and Mallik, RC and Shabadi, R and Krishnan, PSSR and Yadav, SK and Ramanujan, RV and Murty, BS (2023) Lowering thermal conductivity in thermoelectric Ti2−xNiCoSnSb half Heusler high entropy alloys. In: Journal of Materials Science, 58 (26). pp. 1736-10752.
Hariharan, VS and Nithin, B and Ruban Raj, L and Makineni, SK and Murty, BS and Phanikumar, G (2023) Modeling Microsegregation during Metal Additive Manufacturing: Impact of Dendrite Tip Kinetics and Finite Solute Diffusion. In: Crystals, 13 (5).
Karati, A and Ghosh, S and Nagini, M and Mallik, RC and Shabadi, R and Murty, BS and Varadaraju, UV (2022) Thermoelectric properties of nanocrystalline half-Heusler high-entropy Ti2NiCoSn1−xSb1+x (x = 0.3, 0.5, 0.7, 1) alloys with VEC > 18. In: Journal of Alloys and Compounds, 927 . pp. 1-9.
Karati, A and Mishra, SR and Ghosh, S and Mallik, RC and Shabadi, R and Ramanujan, RV and Yadav, SK and Murty, BS and Varadaraju, UV (2022) Thermoelectric properties of a high entropy half-Heusler alloy processed by a fast powder metallurgy route. In: Journal of Alloys and Compounds, 924 .
Vikram, RJ and Verma, SK and Dash, K and Fabijanic, D and Murty, BS and Suwas, S (2022) Mechanism Controlling Elevated Temperature Deformation in Additively Manufactured Eutectic High-Entropy Alloy. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science .
Ghosh, S and Rout, U and Raut, KK and Karati, A and Rogl, G and Rogl, PF and Bauer, E and Murty, BS and Mallik, RC (2022) Thermoelectric Properties of Sulfur-Filled and Iron-Substituted Co4Sb12. In: ACS Applied Energy Materials, 5 (11). pp. 14231-14238.
Sabban, R and Dash, K and Suwas, S and Murty, BS (2022) Strength–Ductility Synergy in High Entropy Alloys by Tuning the Thermo-Mechanical Process Parameters: A Comprehensive Review. In: Journal of the Indian Institute of Science .
Karati, A and Ghosh, S and Mallik, RC and Shabadi, R and Murty, BS and Varadaraju, UV (2022) Effect of Processing Routes on the Microstructure and Thermoelectric Properties of Half-Heusler TiFe0.5Ni0.5Sb1−xSnx (x = 0, 0.05, 0.1, 0.2) Alloys. In: Journal of Materials Engineering and Performance, 31 (1). pp. 305-317.
Ghosh, S and Tippireddy, S and Shankar, G and Karati, A and Rogl, G and Rogl, P and Bauer, E and Malladi, SRK and Murty, BS and Suwas, S and Mallik, RC (2021) InSb nanoparticles dispersion in Yb-filled Co4Sb12 improves the thermoelectric performance. In: Journal of Alloys and Compounds, 880 .
Ghosh, S and Shankar, G and Karati, A and Rogl, G and Rogl, P and Bauer, E and Murty, BS and Suwas, S and Chandra Mallik, R (2021) Thermoelectric properties enhancement of Ba0·2Co4Sb12 through dispersion of GaSb inclusions. In: Physica B: Condensed Matter .
Singh, S and Shaikh, SM and Kumar M K, P and Murty, BS and Srivastava, C (2020) Microstructural homogenization and substantial improvement in corrosion resistance of mechanically alloyed FeCoCrNiCu high entropy alloys by incorporation of carbon nanotubes. In: Materialia, 14 .
Ghosh, S and Shankar, G and Karati, A and Rogl, G and Rogl, P and Bauer, E and Murty, BS and Suwas, S and Mallik, RC (2020) Preferential phonon scattering and low energy carrier filtering by interfaces of: In situ formed InSb nanoprecipitates and GaSb nanoinclusions for enhanced thermoelectric performance of In0.2Co4Sb12. In: Dalton Transactions, 49 (44). pp. 15883-15894.
Ghosh, S and Shankar, G and Karati, A and Werbach, K and Rogl, G and Rogl, P and Bauer, E and Murty, BS and Suwas, S and Mallik, RC (2020) Enhanced Thermoelectric Performance in the Ba0.3Co4Sb12/InSb Nanocomposite Originating from the Minimum Possible Lattice Thermal Conductivity. In: ACS Applied Materials and Interfaces, 12 (43). pp. 48729-48740.
Karati, A and Hariharan, VS and Ghosh, S and Prasad, A and Nagini, M and Guruvidyathri, K and Mallik, RC and Shabadi, R and Bichler, L and Murty, BS and Varadaraju, UV (2020) Thermoelectric properties of half-Heusler high-entropy Ti2NiCoSn1-xSb1+ x (x = 0.5, 1) alloys with VEC>18. In: Scripta Materialia, 186 . pp. 375-380.
Vikram, RJ and Murty, BS and Fabijanic, D and Suwas, S (2020) Insights into micro-mechanical response and texture of the additively manufactured eutectic high entropy alloy AlCoCrFeNi2.1. In: Journal of Alloys and Compounds, 827 .
Karati, A and Mukherjee, S and Mallik, RC and Shabadi, R and Murty, BS and Varadaraju, UV (2019) Simultaneous increase in thermopower and electrical conductivity through Ta-doping and nanostructuring in half-Heusler TiNiSn alloys. In: Materialia, 7 .
Karati, Anirudha and Nagini, M and Ghosh, Sanyukta and Shabadi, Rajashekhara and Pradeep, KG and Mallik, Ramesh Chandra and Murty, BS and Varadaraju, UV (2019) Ti2NiCoSnSb - a new half-Heusler type high-entropy alloy showing simultaneous increase in Seebeck coefficient and electrical conductivity for thermoelectric applications. In: SCIENTIFIC REPORTS, 9 .
Babu, Arvindha D and Majumdar, Bhaskar and Sarkar, Rajdeep and Murty, BS and Chattopadhyay, K (2016) On the Structural Stability of Melt Spun Ribbons of Fe95-x Zr (x) B4Cu1 (x=7 and 9) Alloys and Correlation with Their Magnetic Properties. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 47A (1). pp. 560-571.
Basu, Joysurya and Murty, BS and Ranganathan, S (2008) Glass forming ability: Miedema approach to (Zr, Ti, Hf)–(Cu, Ni) binary and ternary alloys. In: Journal of Alloys and Compounds, 465 (1-2). pp. 163-172.
Ray, PK and Chattopadhyay, K and Murty, BS (2008) Influence of thermodynamics and local geometry on glass formation in Zr based alloys. In: Applied Physics Letters, 93 (6). 061903-1-061903-3.
Takeuchi, A and Ranganathan, S and Murty, BS and Inoue, A (2008) Analysis of Composition Dependence of Formation of Ternary Bulk Metallic Glasses from Crystallographic Data on Ternary Compounds. In: Reviews on Advanced Materials Science, 18 (1). pp. 56-60.
Murty, BS and Ranganathan, S (1998) Novel materials synthesis by mechanical alloying/milling. In: International Materials Reviews, 43 (3). pp. 101-141.
Murty, BS and Rao, Mohan M and Ranganathan, S (1995) Thermodynamics of Glass Formation in Pure Metals. In: Calphad, 19 (3). pp. 297-304.
Murty, BS and Rao, Mohan M and Ranganathan, S (1995) Differences in the glass-forming ability of rapidly solidified and mechanically alloyed Ti-Ni-Cu alloys. In: Materials Science and Engineering A, 196 (1-2). pp. 237-241.
Murty, BS and Rao, Mohan M and Ranganathan, S (1995) Milling maps and amorphization during mechanical alloying. In: Acta Metallurgica et Materialia, 43 (6). pp. 2443-2450.
Goyal, A and Murty, BS and Ranganathan, S (1993) Crystallization studies on amorphous AI-Y-Ni and AI-Y-Cu alloys. In: Journal of Materials Science (full set), 28 (22). pp. 6091-6095.
Murty, BS (1993) Mechanical alloying—a novel synthesis route for amorphous phases. In: Bulletin of Materials Science, 16 (1). pp. 1-17.
Murty, BS and Ranganathan, S and Rao, Mohan M (1992) Solid state amorphization in binary Ti---Ni, Ti---Cu and ternary Ti---Ni---Cu system by mechanical alloying. In: Materials Science and Engineering: A, 149 (2). pp. 231-240.
Murty, BS and Naik, MD and Rao, Mohan M and Ranganathan, S (1992) Glass forming composition range in the Al-Ti system by mechanical alloying. In: Materials Forum, 16 (1). pp. 19-26.
Murty, BS and Mohan Rao, M and Ranganathan, S (1990) Synthesis of amorphous phase in Ti---Ni---Cu system by mechanical alloying. In: Scripta Metallurgica et Materialia, 24 (9). pp. 11819-1824.
