|
 | Up a level |
Makineni, SK and Sharma, A and Pandey, A and Chattopadhyay, K (2021) An Overview on Co-Base Alloys for High Temperature Applications. [Book Chapter]
Baler, N and Pandey, P and Singh, MP and Makineni, SK and Chattopadhyay, K (2020) Effects of Ti and Cr Additions in a Co�Ni�Al�Mo�Nb-Based Superalloy. In: Minerals, Metals and Materials Series, 12-16 September 2021, Seven Springs; United States, pp. 929-936.
Esakkiraja, N and Vishwakarma, A and Makineni, SK and Jayaram, V and Hickel, T and Divinski, SV and Paul, A (2024) Diffusion-controlled growth and microstructural evolution between Pt and Pd containing B2-NiAl bondcoats and Ni-based single crystal superalloy. In: Acta Materialia, 266 .
Rastogi, A and Kalyan, D and Makineni, SK and Neelakantan, S (2024) Elucidating the role of stress-induced martensite on the tensile behaviour of metastable β Ti-10V-2Fe-3Al alloy. In: Materials Characterization, 207 .
Mehrotra, S and Kalyan, D and Makineni, SK and Santra, S (2024) Oxide growth characteristics, kinetics and mechanism of rutile formation on pure titanium. In: Vacuum, 219 .
Gupta, H and Kapoor, R and Shinde, D and Makineni, SK (2024) Achieving ultra-high flow stress and hardness in a medium Mn stainless steel by the formation of strain-induced martensite and G-phase precipitates. In: Scripta Materialia, 241 .
Samanta, S and Gangavarapu, S and Jayabalan, B and Makineni, SK and Dutta, M and Singh, SB (2023) Atomic-scale investigation of H-trapping by fine NbC precipitates in a low C ferritic steel. In: Scripta Materialia, 234 .
Jyotheender, KS and Mathai, M and Makineni, SK and Srivastava, C (2023) Nickel partitioning in ZnNi coatings (Ni less than 4 wt.%) and its effect on the coating corrosion behaviour. In: Philosophical Magazine .
Hariharan, VS and Nithin, B and Ruban Raj, L and Makineni, SK and Murty, BS and Phanikumar, G (2023) Modeling Microsegregation during Metal Additive Manufacturing: Impact of Dendrite Tip Kinetics and Finite Solute Diffusion. In: Crystals, 13 (5).
Sharma, D and Kalyan, D and Makineni, SK and Santra, S (2023) Effect of Zr on growth kinetics, microstructure and microtexture of Nb3Sn by bronze technique. In: Journal of Alloys and Compounds, 935 .
Bian, B and Taheriniya, S and Muralikrishna, GM and Godha, A and Makineni, SK and Sankaran, S and Straumal, BB and Du, Y and Wilde, G and Divinski, SV (2023) Kinetic and structural insights into the grain boundary phase transitions in Ni-Bi alloys. In: Acta Materialia, 245 .
Baler, N and Godha, A and Makineni, SK (2023) On the discontinuous precipitation during recrystallization in a multicomponent alloy. In: Scripta Materialia, 224 .
Mazumder, N and Kumar, D and Singh, MP and Makineni, SK and Mukhopadhyay, NK and Chattopadhyay, K (2023) Synergistic effect of multimodal γ’ precipitates tuned through Ti addition on phase stability and strength of Co-Ni based superalloy. In: Scripta Materialia, 223 .
Mondol, S and Bansal, U and Dhanalakshmi, P and Makineni, SK and Mandal, A and Chattopadhyay, K (2022) Enhancement of high temperature strength of Al-Cu alloys by minor alloying and hot working process. In: Journal of Alloys and Compounds, 921 .
Sharma, A and Dixit, S and Baler, N and Agrawal, P and Makineni, SK and Chattopadhyay, K (2022) Impact of boron as an alloying addition on the microstructure, thermo-physical properties and creep resistance of a tungsten-free Co-base γ/γ′ superalloy. In: Materials Science and Engineering A, 855 .
Pandey, P and Pantawane, MV and Baler, N and Ravi, R and Makineni, SK and Chattopadhyay, K (2022) Effect of Cr addition on the γ′ strengthened CoNiCrAlMo compositionally complex alloy. In: Materials Science and Technology (United Kingdom) .
He, J and Li, N and Makineni, SK and Zhao, Y and Liu, W and Wang, L and Wang, Z and Song, M (2022) Effects of minor Nb alloying on the thermal stability and mechanical responses of a γ/γ′ type high-entropy alloy with high Fe content. In: Materials Science and Engineering A, 851 .
Mondal, S and Bansal, U and Makineni, SK (2022) On the fabrication of atom probe tomography specimens of Al alloys at room temperature using focused ion beam milling with liquid Ga ion source. In: Microscopy Research and Technique .
Agrawal, P and Karthikeyan, S and Makineni, SK and Gault, B and Banerjee, D (2022) Dynamic strain aging in the intermediate temperature regime of near-α titanium alloy, IMI 834: Experimental and modeling. In: Acta Materialia, 222 .
Sharma, A and Mondal, C and Makineni, SK and Chattopadhyay, K and Banerjee, D (2022) Exploring the correlation between microscopic mechanisms and macroscopic behaviour in creep of a directionally solidified tungsten-free γ/γ� CoNi-base superalloy. In: Acta Materialia, 228 .
Gault, B and Chiaramonti, A and Cojocaru-MirÃdin, O and Stender, P and Dubosq, R and Freysoldt, C and Makineni, SK and Li, T and Moody, M and Cairney, JM (2021) Atom probe tomography. In: Nature Reviews Methods Primers, 1 (1).
Pandey, P and Mazumder, N and Singh, MP and Patil, C and Sharma, A and Makineni, SK and Banerjee, D and Chattopadhyay, K (2021) Design of low mass density γ/γ� CoNi-based superalloys with promising high-temperature mechanical properties. In: Physical Review Materials, 5 (9).
Volz, N and Xue, F and Zenk, CH and Bezold, A and Gabel, S and Subramanyam, APA and Drautz, R and Hammerschmidt, T and Makineni, SK and Gault, B and Göken, M and Neumeier, S (2021) Understanding creep of a single-crystalline Co-Al-W-Ta superalloy by studying the deformation mechanism, segregation tendency and stacking fault energy. In: Acta Materialia, 214 .
Makineni, SK and Singh, MP and Chattopadhyay, K (2021) Low-Density, High-Temperature Co Base Superalloys. In: Annual Review of Materials Research, 51 . pp. 187-208.
Mukhopadhyay, S and Pandey, P and Baler, N and Biswas, K and Makineni, SK and Chattopadhyay, K (2021) The role of Ti addition on the evolution and stability of γ/γ� microstructure in a Co-30Ni-10Al-5Mo-2Ta alloy. In: Acta Materialia, 208 .
He, J and Wu, X and Guo, Y and Makineni, SK (2021) On the compositional and structural redistribution during partial recrystallisation: a case of σ-phase precipitation in a Mo-doped NiCoCr medium-entropy alloy. In: Scripta Materialia, 194 .
Sun, B and Lu, W and Gault, B and Ding, R and Makineni, SK and Wan, D and Wu, C-H and Chen, H and Ponge, D and Raabe, D (2021) Chemical heterogeneity enhances hydrogen resistance in high-strength steels. In: Nature Materials .
Im, HJ and Makineni, SK and Oh, CS and Gault, B and Choi, P-P (2021) Elemental Sub-Lattice Occupation and Microstructural Evolution in γ / γ � Co-12Ti-4Mo-Cr Alloys. In: Microscopy and Microanalysis .
Singh, MP and Makineni, SK and Chattopadhyay, K (2020) Achieving lower mass density with high strength in Nb stabilised γ/γ′ Co–Al–Mo–Nb base superalloy by the replacement of Mo with V. In: Materials Science and Engineering A, 794 .
Baler, N and Pandey, P and Palanisamy, D and Makineni, SK and Phanikumar, G and Chattopadhyay, K (2020) On the effect of W addition on microstructural evolution and γ′ precipitate coarsening in a Co–30Ni–10Al–5Mo–2Ta–2Ti alloy. In: Materialia, 10 .
Pandey, P and Sawant, AK and Nithin, B and Peng, Z and Makineni, SK and Gault, B and Chattopadhyay, K (2019) On the effect of Re addition on microstructural evolution of a CoNi-based superalloy. In: ACTA MATERIALIA, 168 . pp. 37-51.
Pandey, P and Makineni, SK and Samanta, A and Sharma, A and Das, SM and Nithin, B and Srivastava, C and Singh, AK and Raabe, D and Gault, B and Chattopadhyay, K (2019) Elemental site occupancy in the L12 A3B ordered intermetallic phase in Co-based superalloys and its influence on the microstructure. In: Acta Materialia, 163 . pp. 140-153.
Santra, S and Makineni, SK and Shankar, G and Suwas, S and Chattopadhyay, K and Divinski, SV and Paul, A (2019) Insight into the effect of Ti-addition on diffusion-controlled growth and texture of Nb 3 Sn intermetallic superconductor phase. In: Materialia, 6 .
Hoque, S Manjura and Makineni, SK and Pal, A and Rahman, SA and Hossain, S and Islam, R and Ayyub, P and Chattopadhyay, K (2018) Two phase ferromagnetic composites in Co-Zr and Co-Zr-Fe systems containing anti-phase domain imparting very high strength. In: MATERIALS RESEARCH BULLETIN, 97 . pp. 61-70.
Kiruthika, P and Makineni, SK and Srivastava, C and Chattopadhyay, K and Paul, A (2016) Growth mechanism of the interdiffusion zone between platinum modified bond coats and single crystal superalloys. In: ACTA MATERIALIA, 105 . pp. 438-448.
Kiruthika, P and Makineni, SK and Srivastava, C and Chattopadhyay, K and Paul, A (2016) Growth mechanism of the interdiffusion zone between platinum modified bond coats and single crystal superalloys. In: ACTA MATERIALIA, 105 . pp. 438-448.
Makineni, SK and Nithin, B and Palanisamy, D and Chattopadhyay, K (2016) Phase evolution and crystallography of precipitates during decomposition of new ``tungsten-free'' Co(Ni)-Mo-Al-Nb gamma-gamma ` superalloys at elevated temperatures. In: JOURNAL OF MATERIALS SCIENCE, 51 (17). pp. 7843-7860.
Makineni, SK and Nithin, B and Chattopadhyay, K (2015) Synthesis of a new tungsten-free gamma-gamma ` cobalt-based superalloy by tuning alloying additions. In: ACTA MATERIALIA, 85 . pp. 85-94.
Makineni, SK and Samanta, A and Rojhirunsakool, T and Alam, T and Nithin, B and Singh, AK and Banerjee, R and Chattopadhyay, K (2015) A new class of high strength high temperature Cobalt based gamma-gamma ` Co-Mo-Al alloys stabilized with Ta addition. In: ACTA MATERIALIA, 97 . pp. 29-40.
Makineni, SK and Nithin, B and Chattopadhyay, K (2015) A new tungsten-free gamma-gamma ` Co-Al-Mo-Nb-based superalloy. In: SCRIPTA MATERIALIA, 98 . pp. 36-39.
Hoque, Manjura S and Makineni, SK and Pal, A and Ayyub, P and Chattopadhyay, K (2014) Structural and magnetic properties of ultra-small scale eutectic CoFeZr alloys. In: JOURNAL OF ALLOYS AND COMPOUNDS, 620 . pp. 442-450.
