|
 | Up a level |
Kumar, P and Dutta, I and Huang, Z and Conway, P (2021) Materials and Processing of TSV. [Book Chapter]
Kumar, P and Lee, T-K and Dutta, I and Huang, Z and Conway, P (2021) Microstructure and Mechanical Reliability Issues of TSV. [Book Chapter]
Ginley, D and Aswathi, R and Atchuta, SR and Basu, B and Basu, S and Christian, JM and Dan, A and Dani, N and Das, R N and Dutta, P and Flueckiger, SM and Garimella, SV and Goswami, Y and Ho, CK and Kedare, S and Khivsara, SD and Kumar, P and Madhusoodana, CD and Mallikarjun, B and Mira-Hernández, C and Orosz, M and Ortega, JD and Parida, DR and Prasad, MS and Ramesh, K and Advaith, S and Saha, SK and Sakthivel, S and Sharma, S and Singh, P and Singh, S and Srikanth, O and Srinivasan, V and Weibel, JA and Wendelin, T (2020) Multiscale Concentrated Solar Power. [Book Chapter]
Kumar, P and Sahoo, S and Shah, V and Kondameedi, V and Jain, A and Verma, A and Bhattacharyya, C and Viswanathan, V (2021) DSLR: Dynamic to Static LiDAR Scan Reconstruction Using Adversarially Trained Autoencoder. In: 35th AAAI Conference on Artificial Intelligence, AAAI 2021, 2 February 2021 through 9 February 2021, Virtual, pp. 1836-1844.
Maiya, MP and Kumar, K and Hafner, A and Banasiak, K and Neksa, P and Kumar, P and Singh, S (2019) Experimental analysis of transcritical CO2 booster refrigeration system with heat recovery and ejector expansion. In: 25th IIR International Congress of Refrigeration, ICR 2019, 24 August 2019 - 30 August 2019, Montreal, pp. 1467-1474.
Sanyal, A and Basu, S and Kumar, P (2014) Adsorption study of silica gel particle for improvement in design of adsorption beds used in solar driven cooling units. In: International Conference of the SolarPACES, SEP 17-20, 2013, Las Vegas, NE, pp. 656-665.
Garg, P and Srinivasan, K and Dutta, P and Kumar, P (2014) Comparison of CO2 and steam in transcritical Rankine cycles for concentrated solar power. In: International Conference of the SolarPACES, SEP 17-20, 2013, Las Vegas, NE, pp. 1138-1146.
Talebanpour, B and Sahaym, U and Dutta, I and Kumar, P (2014) EFFECT OF AGING ON IMPRESSION CREEP BEHAVIOR OF Pb-FREE SOLDERS. In: ASME International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, JUL 16-18, 2013, Burlingame, CA.
Mitra, S and Srinivasan, K and Kumar, P and Murthy, SS and Dutta, P (2014) Solar driven Adsorption Desalination system. In: International Conference of the SolarPACES, SEP 17-20, 2013, Las Vegas, NE, pp. 2261-2269.
Dwivedi, PN and Kumar , P and Bhattacharya, A and Padhi, R (2013) Lead Angle Constrained Optimal Midcourse Guidance. In: AIAA Guidance, Navigation, and Control (GNC) Conference, Guidance, Navigation, and Control and Co-located Conferences, (AIAA 2013-4533), August 19-22, 2013, Boston, Massachusetts.
Hoque, SJ and Kumar, P (2023) Novel Supercritical Carbon Dioxide Cycle for a Waste Recovery Application. In: 3rd Biennial International Conference on Future Learning Aspects of Mechanical Engineering, FLAME 2022, 3-5 August 2022, Noida, pp. 51-56.
Mishra, A and Rana, K and Kumar, P and Srinivas, T (2023) Mid Infrared Polarization Independent Tapered Waveguide Based Multianalyte Sensor – A Theoretical Study. In: Integrated Optics: Devices, Materials, and Technologies XXVII 2023, 30 January - 2 February 2023, San Francisco.
Kumar, P and Mishra, A and Mihr, F and Shivaleela, ES and Srinivas, T (2023) Polarization-independent dual-channel broadband wavelength demultiplexer design by Inverse method. In: Integrated Optics: Devices, Materials, and Technologies XXVII 2023, 30 January 2023 - February 2023, San Francisco.
Geremew, FM and Kumar, P and Mishra, A and Talabattula, S (2023) Reconfigurable resonator based on five times self-coupled photonic waveguide for versatile functionalities. In: Integrated Optics: Devices, Materials, and Technologies XXVII 2023, 30 January - 2 February 2023, San Francisco.
Kumar, P and Mihret, F and Mishra, A and Shivaleela, ES and Srinivas, T (2023) Inverse Design of SiN based Wavelength Demultiplexer. In: 2nd International Conference for Advancement in Technology, ICONAT 202, 24 - 26 January 2023, Goa.
Kumar, P and Mihret, F and Shivaleela, ES and Srinivas, T (2023) A compact 1 � 4 wavelength demultiplexer by Inverse Design. In: UNSPECIFIED, pp. 45-46.
Lal, D and Tripathi, A and Ghosh, A and Bathe, R and Kumar, P and Jayaram, V (2022) Use of Compression-Bending Fracture Geometry to Study the Effects of Stoichiometry on Fracture Toughness of β-NiAl. In: 3rd Structural Integrity Conference and Exhibition, SICE 2020, 11-13 December 2020, IIT Bombay, pp. 313-320.
Ahmad, SS and Verma, A and Mouli, T and Biradar, V and Narayanan, G and Kumar, P (2022) Experimental Investigations on 10,000-RPM Slitted-Rotor Switched Reluctance Machine. In: IEEE Energy Conversion Congress and Exposition (ECCE), 09 - 13 October 2022, Detroit.
Hoque, SJ and Kumar, P and Gopi, PC (2022) Specific Speed Considerations for Inward Flow Radial Supercritical CO2 Turbines. In: ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition, GT 2022, 13 June 2022 - 17 June 2022, Rotterdam.
Seshadri, L and Patel, A and Biradar, V and Kumar, P and Gopi, PC (2022) Two Stage Radial Compressor for a Kilowatt Scale Supercritical Carbon Dioxide Power Block: Design Considerations. In: ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition, GT 2022, 13 June 2022 - 17 June 2022, Rotterdam.
Bhanushali, A and Bridgman, G and Deekshitha, G and Ghosh, P and Kumar, P and Kumar, S and Kolladath, AR and Ravi, N and Seth, A and Seth, A and Singh, A and Sukhadia, VN and Umesh, S and Udupa, S and Durga Prasad, LVSV (2022) Gram Vaani ASR Challenge on spontaneous telephone speech recordings in regional variations of Hindi. In: Proceedings of the Annual Conference of the International Speech Communication Association, INTERSPEECH, 18 - 22 September 2022, Incheon, pp. 3548-3552.
Kumar, P and Mihret, F and Mishra, A and Shivaleela, ES and Srinivas, T (2022) Inverse Design of Multilayer Thin film by Deep Neural Network. In: 2022 International Conference on Numerical Simulation of Optoelectronic Devices, NUSOD 2022, 12 - 16 September 2022, Turin, pp. 129-130.
Kumar, P and Mishra, A and Shivaleela, ES and Srinivas, T (2022) Inverse Design of SOI based broadband Grating Coupler. In: 5th IEEE Research and Applications of Photonics in Defense Conference, RAPID 2022, 12 - 14 September 2022, Miramar Beach.
Hoque, SJ and Kumar, P and Gopi, PC (2022) INFLUENCE OF GEOMETRIC PARAMETERS FOR A 100 KW INWARD FLOW RADIAL SUPERCRITICAL CO2TURBINE. In: ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition, GT 2022, 13 June 2022 - 17 June 2022, Rotterdam.
Chatterjee, R and Patel, A and Kumar, N and Kumar, P (2022) Semi-Analytical Model for High-Speed Rotor Whirl Prediction: An Assumed Modes Formulation for an Axisymmetric Rotor With Non-Uniform Properties. In: ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition, GT 2022, 13 - 17 June 2022, Rotterdam.
Prasad, KNV and Patel, A and Biradar, V and Ahmad, SS and Kumar, P and Narayanan, G (2021) Bearing Selection for High-Speed Electrical Machine. In: 2021 National Power Electronics Conference, 15-17 Dec 2021, Bhubaneswar.
Guntanur, R and Patel, A and Biradar, V and Kumar, P (2021) COUPLED THERMAL-STRUCTURAL ANALYSIS of GENERATOR for sCO2 TURBOMACHINERY. In: ASME 2021 Gas Turbine India Conference, GTINDIA 2021, 2-03 Dec 2021, Virtual, Online.
Patel, A and Biradar, V and Kumar, P (2021) HARMONIC ANALYSIS of the HIGH SPEED DIRECT COUPLED SCO2 TURBOGENERATOR. In: ASME 2021 Gas Turbine India Conference, 2-3 Dec 2021, Virtual, Online.
Kumaran, RS and Alone, DB and Nassar, A and Kumar, P (2021) PRELIMINARY AERODYNAMIC DESIGN of A S-CO2 AXIAL TURBINE. In: ASME 2021 Gas Turbine India Conference, GTINDIA 2021, 2-3 Dec 2021, Virtual, Online.
Hoque, SJ and Kumar, P (2021) THEORETICAL ESTIMATION of MINIMUM and MAXIMUM ALLOWABLE ROTATIONAL SPEED of SUPERCRITICAL CO2 INWARD FLOW RADIAL TURBINE. In: ASME 2021 Gas Turbine India Conference, 2-3 Dec 2021, Virtual, Online.
Goel, P and Kumar, P and Jayaram, V (2020) Extracting Strain Rate Sensitivity of Metals from a Single Cantilever Under Bending. In: 3rd Structural Integrity Conference and Exhibition, SICE, 11-13 December 2020, IIT Bombay, pp. 343-355.
Mihret, F and Kumar, P and Srinivas, T (2020) Hybrid Photonic Beamforming for 5G Downlink Millimeter Wave MIMO Communication. In: Proceedings of CONECCT 2020 - 6th IEEE International Conference on Electronics, Computing and Communication Technologies, 2 - 4 July 2020, Bangalore.
Kanjilal, A and Kumar, P (2020) Insights into growth behavior of intermetallic compounds in Sn-Ag-Cu solder joints during mechanical and thermo-mechanical deformation processes. In: 2019 IEEE 21st Electronics Packaging Technology Conference, EPTC 2019, 4-6 Dec. 2019, Marina Bay Sands Convention Centre, Singapore, pp. 48-52.
Kumar, P and Ansari, MH and Sharma, A (2020) MBC-CA: Multithreshold binary conversion based salt-and-pepper noise removal using cellular automata. In: Communications in Computer and Information Science, 27-29 September 2019, Springer, Singapore, pp. 195-204.
Sharma, M and Kumar, S and Pratap, R and Irzhak, A and Kumar, P and Von Gratowski, S and Koledov, V and Lega, P and Shavrov, V (2020) Electric current driven formation of micro-and nano-sized beads in thin Cr films. In: 9th IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, 3M-NANO 2019, 4-8 August 2019, Zhenjiang; China, pp. 86-89.
Senthil Kumaran, R and Alone, DB and Kumar, P (2020) Profile loss investigations with a S-CO2 axial turbine aerofoil. In: ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, GT 2020, 21-25 Sept 2020, Virtual, Online.
Patel, A and Balasubramanian, AK and Biradar, V and Srivatsa, S and Kumar, P and Sonti, VR (2019) Analysis of aerostatic thrust bearing for S-CO2 turbomachinery. In: ASME 2019 Gas Turbine India Conference, GTINDIA 2019, 5 - 6 December 2019, Chennai, Tamil Nadu.
Sonawane, D and Kumar, P (2019) Effect of accelerated thermal cyclic loading on structural reliability of cu-filled TSV. In: 2019 IEEE 21st Electronics Packaging Technology Conference (EPTC), 4-6 Dec. 2019, Singapore, Singapore, pp. 1-5.
Kumar, P and Nair, AR and Chatterjee, O and Paul, T and Ghosh, A and Chakrabartty, S and Thakur, CS (2019) Neuromorphic In-Memory Computing Framework using Memtransistor Cross-bar based Support Vector Machines. In: 62nd IEEE International Midwest Symposium on Circuits and Systems, MWSCAS 2019, 4 - 7 August 2019, Dallas, pp. 311-314.
Von Gratowski, S and Nagaraja, VS and Nithya, G and Kumar, P and Wang, Z and Li, L and Song, Z and Irzhak, A and Lega, P and Frolov, A and Orlov, A and Koledov, V (2019) Study of the sticking effects during mechanical nano-manipulation using shape memory nanotools. In: 9th IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale,, 4 - 8 August 2019, Zhenjiang, China, pp. 130-133.
Talukder, S and Gogoi, B and Kumar, P and Pratap, R and Maoz, R and Sagiv, J (2019) Advanced nanopatterning using scanning probe technology. In: 2017 International Conference on Nanotechnology: Ideas, Innovations and Initiatives, ICN:3i 2017, 6 - 8 December 2017, Roorkee, pp. 740-743.
Irzhak, A and Koledov, V and Zhuravleva, T and Kumar, P (2019) Melting of metall nano particles for nanoassembling. In: 9th IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, 3M-NANO 2019, 4-8, August 2019, Zhenjiang; China, pp. 78-81.
Seshadri, L and Giri, G and Setty, R and Sathish, S and Nassar, A and Gopi, PC and Kumar, P and Moroz, L and Namburi, AN (2019) Design of 20 kW turbomachinery for closed loop supercritical carbon dioxide Brayton test loop facility. In: ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, GT 2019, 17 - 21 June 2019, Phoenix.
Dutta, A and Gupta, A and Sathish, S and Bandooni, A and Kumar, P (2019) Simple recuperated S-CO2 cycle revisited: Optimization of operating parameters for maximum cycle efficiency. In: ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, GT 2019, 17 - 21 June 2019, Phoenix.
Narchail, S and Urabinahatti, C and Srivatsa, S and Patel, A and Ahmad, SS and Kumar, P and Narayanan, G (2019) Experimental Investigations on a High-Speed Rotor for a Switched Reluctance Machine. In: 8th IEEE India International Conference on Power Electronics, IICPE 2018, 13-15 December 2018, Jaipur.
Gupta, S and Kumar, P and Kumar, K and Chakraborty, S and Thakur, CS (2019) Low power neuromorphic analog system based on sub-threshold current mode circuits. In: 2019 IEEE International Symposium on Circuits and Systems, ISCAS 2019, 26 - 29 May 2019, Sapporo.
Sharma, R and Gupta, S and Kumar, K and Kumar, P and Thakur, CS (2019) Real-time image segmentation using neuromorphic pixel array. In: 2019 IEEE International Symposium on Circuits and Systems, ISCAS 2019, 26 - 29 May 2019, Sapporo.
Kumar, K and Kumar, P (2019) Analysis of Propane + CO2 mixture as a working fluid in a vapor compression refrigeration system. In: 8th Conference on Ammonia and CO2 Refrigeration Technologies, Ohrid 2019, 11 - 13 April 2019, Ohrid, pp. 319-326.
Sathish, S and Kumar, P and Nagarathinam, L and Swami, L and Namburi, AN and Bandarupalli, VS and Gopi, PC (2019) Brayton cycle supercritical CO2 power block for industrial waste heat recovery. In: ASME 2019 Gas Turbine India Conference, GTINDIA 2019, 5 - 6 December 2019, Chennai, Tamil Nadu.
Pandey, V and Seshadri, L and Gupta, J and Mariayyah, R and Santhosh, NL and Kumar, P (2019) Modelling of gas cooler for S-CO2 Brayton power cycle. In: ASME 2019 Gas Turbine India Conference, GTINDIA 2019, 5 - 6 December 2019, Chennai, Tamil Nadu.
Seshadri, L and Raja, HN and Kumar, P and Nassar, A and Giri, G and Moroz, L (2019) Supercritical carbon dioxide turbomachinery options for kilowatt to gigawatt level power generation. In: ASME 2019 Gas Turbine India Conference, GTINDIA 2019, 5 - 6 December 2019, Chennai, Tamil Nadu.
Narchail, S and Ahmad, SS and Srivatsa, S and Kumar, P and Narayanan, G (2019) Experimental Vibration Studies on a Solid-Rotor Switched Reluctance Machine. In: 2019 National Power Electronics Conference (NPEC), 13-15 Dec. 2019, Tiruchirappalli, India.
Kumar, S and Abraham, E and Talukder, S and Kumar, P and Pratap, R (2018) Micro Electrolithography System Development. In: 4th IEEE International Conference on Emerging Electronics, ICEE 2018, 17 - 19 December 2018, Bengaluru.
Kumar, S and Kumar, P and Kumari, K and Avasthi, S (2018) Optimization of controlled two-step liquid phase crystallization of Ge-on-Si. In: 4th IEEE International Conference on Emerging Electronics, ICEE 2018, 17-19 December 2018, Bengaluru.
Kumar, P and Arvind, JM and Mohan, S and Avasthi, S (2018) SIMS characterization of TiN diffusion barrier layer on steel substrate. In: 4th IEEE International Conference on Emerging Electronics, ICEE 2018, 17 - 19 December 2018, Bengaluru.
Ginley, DS and Tumas, W and Howe, MM and Dutta, P and Ho, CK and Vasi, JM and Van Hest, MFAM and Curtright, AE and Kumar, P and Chattopadhyay, K (2018) Solar Energy Research Institute for India and the United States (SERIIUS): A Focused Solar Consortium. In: 7th IEEE World Conference on Photovoltaic Energy Conversion, WCPEC 2018, 10 - 15 June 2018, Waikoloa Village, pp. 2488-2491.
Pandey, V and Kumar, P (2018) Thermal resistance network model for a recuperator in S-CO2 power cycle. In: 16th International Heat Transfer Conference, IHTC 2018, 10 - 15 August 2018, Beijing, China, pp. 4919-4930.
Kumar, P and Bhattacharyya, A and Padhi, R (2018) Minimum drag optimal guidance with final flight path angle constraint against re-entry targets. In: AIAA Guidance, Navigation, and Control Conference, 2018, 8–12 January 2018, Kissimmee, Florida.
Sharma, D and Kumar, P (2017) Synergistic effect of electromagnetic force on fracture behavior of pre-cracked thin metallic structures. In: 14th International Conference on Fracture, ICF 2017, 18 - 20 June 2017, Rhodes, pp. 407-408.
Kumar, P and Kawasaki, M and Langdon, TG (2017) Resolving the strength-ductility paradox through severe plastic deformation of a cast Al-7 Si alloy. In: 9th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2016, 29 - 3 June 2016, Graz, pp. 1043-1048.
Kumar, P and Talenbanpour, B and Sahaym, U and Wen, CH and Dutta, I (2012) Microstructural Evolution and Some Unusual Effects During Thermo-Mechanical Cycling of Sn-Ag-Cu Alloys. In: 13th IEEE InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm) , MAY 30-JUN 01, 2012 , San Diego, CA , pp. 880-887.
Kumar, P and Lakshmi, H and Dutta, P (2009) Determination of solid fraction evolution during solidification of aluminum alloy in presence of linear electromagnetic stirring. In: International Mechanical Engineering Congress & Exposition, November 13-19, 2009, Lake Buena Vista, Florida, USA.
Kumar, P and Lakshmi, H and Dutta, P (2008) Rheocasting of A356 Alloy using Linear electromagnetic Stirring. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.
Kumar, P and Lakshmi, H and Dutta, P (2008) Solidification of A356 Alloy in a Linear Electromagnetic Stirrer. In: 10th International Conference on Semi-Solid Processing of Alloys and Composites, September 16th -18th, 2008., Aachen and Germany, pp. 563-568.
Barman, N and Kumar, P and Dutta, P (2008) Studies on Transport Phenomena in Rheocasting of Al-Si alloy in Presence of Electromagnetic Stirring. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.
Kumar, P and Lakshmi, H and Dutta, P (2007) Rheocasting of aluminium A356 alloy in a linear electromagnetic stirrer. In: The 6th Pacific Rim International Conference on Advanced Materials and Processing, , Nov. 5-9, 2007, Jeju Island, Korea.
Dutta, P and Murthy, KSS and Kumar, P (2007) Squeeze Casting and Semi-solid Forming: New Developments. In: International Conference on Aluminium (INCAL), , Nov. 21-23, 2007, Hyderabad.
Ahsan, N and Shariq, M and Surolia, A and Raj, R and Khan, MF and Kumar, P (2024) Multipronged regulation of autophagy and apoptosis: emerging role of TRIM proteins. In: Cellular and Molecular Biology Letters, 29 (1).
Malleswararao, K and Kumar, P and Dutta, P and Srinivasa Murthy, S (2024) Experimental investigations on a coupled metal hydride based thermal energy storage system. In: International Journal of Hydrogen Energy, 56 . pp. 1371-1383.
Seshadri, L and Kumar, P (2024) Sliding Pressure Inventory Control of a Supercritical CO2 Cycle for Concentrated Solar Power-Analysis and Implications. In: Journal of Solar Energy Engineering, Transactions of the ASME, 146 (1). pp. 1-25.
Kumar, C and Kumar, P (2024) Analyzing dynamic strain aging and yield strength anomaly in IN740H, a nickel-based superalloy comprising low volume fraction of γ�. In: Materialia, 33 .
Telpande, S and Jain, S and Kumar, P (2024) Effect of external magnetic field on electric current-induced fracture of notched thin metallic conductors: Part 1 � Low magnetic fields. In: Theoretical and Applied Fracture Mechanics, 130 .
Telpande, S and Jain, S and Kumar, P (2024) Effect of external magnetic field on electric current-induced fracture of notched thin metallic conductors: Part 2- High magnetic fields. In: Theoretical and Applied Fracture Mechanics, 130 .
Joshi, P and Kumar, P and Aravinth, S and Varghese, JM and Mondal, PP (2024) Fluorescence-based multifunctional light sheet imaging flow cytometry for high-throughput optical interrogation of live cells. In: Communications Physics, 7 (1).
Kumar, P and Patra, A and Shivaleela, ES and Caligiuri, V and Krahne, R and De Luca, A and Srinivas, T (2024) Multi-solution inverse design in photonics using generative modeling. In: Journal of the Optical Society of America B: Optical Physics, 41 (2). A152-A160.
Shastri, V and Majumder, S and Ashok, A and Roy, K and Pratap, R and Kumar, P (2023) Electric current-assisted manipulation of liquid metals using a stylus at micro-and nano-scales. In: Nanotechnology, 34 (10).
Saha, BK and Chakraborty, B and Mondal, J and Pesyridis, A and Messini, EMB and Kumar, P (2023) Design and Implementation of a Control Strategy for a Dynamic Organic Rankine Cycle-Based Power System in the Context of Industrial Waste Heat Recovery. In: Energy Technology .
Kulkarni, A and Srinivasan, D and Ravanappa, P and Jayaram, V and Kumar, P (2023) Creep behavior of additively manufactured high strength A205 aluminum alloy. In: Additive Manufacturing Letters, 6 .
Shankar, U and Kumar, A and Chaurasia, SK and Kumar, P and Latif, FA and Yahya, MZA (2023) Structural, Optical, and Magnetic Properties of PMMA-Magnetite (Fe3O4) Composites: Role of Magneto-Conducting Filler Particles. In: Journal of Electronic Materials .
Kumar, P and Mondal, PP (2023) Field dipole interaction and polarization effects in light-sheet optical fluorescence microscopy. In: Journal of Applied Physics, 133 (22).
Jalali, SIA and Bhowmick, S and Jayaram, V and Kumar, P (2023) Sample size effect on creep in bending: An interplay between strain gradient and surface proximity effects. In: Journal of Materials Research, 38 (12). pp. 3059-3077.
Malleswararao, K and Kumar, P and Dutta, P and Srinivasa Murthy, S (2023) Experimental studies on LaNi4.25Al0.75 alloy for hydrogen and thermal energy storage applications. In: International Journal of Hydrogen Energy .
Hoque, SJ and Kumar, P and Dutta, P (2023) Concentrating solar powered transcritical co2 power generation cycle for the union territory of ladakh, india. In: International Journal of Energy for a Clean Environment, 24 (4). 17- 40.
Jagtap, P and Kumar, P (2023) Effect of electric field on mechanical behavior of vertically-aligned carbon nanotube structures. In: Proceedings of the Indian National Science Academy .
Gupta, P and Kumar, P and Rao, SMV (2023) Low-frequency unsteadiness of recompression shock structures in the diffuser of supersonic ejectors. In: Physics of Fluids, 35 (3).
Hijazi, F and Roy, B and Srinivasan, D and Jayaram, V and Kumar, P (2023) Non-uniform mechanical behaviour of uniaxially rolled Ti–6Al–4V with micro-texture regions. In: Materials Science and Engineering A, 869 .
Gupta, P and Rao, SMV and Kumar, P (2023) Performance evaluation of air ejectors using artificial neural network approach. In: Sadhana - Academy Proceedings in Engineering Sciences, 48 (2).
Paul, S and Kumar, P and Rao, SM (2023) Thermodynamic analysis on the effect of supercritical CO2 ejector in cogeneration cycle for dairy application. In: Thermal Science and Engineering Progress, 39 .
Goel, P and Kumar, P and Jayaram, V (2023) Estimation of stress redistribution for the extraction of power law creep parameters from bending. In: Mechanics of Materials, 177 .
Kulkarni, A and Srinivasan, D and Kumar, S and Kumar, P and Jayaram, V (2023) Precipitate evolution and thermal stability of A205 fabricated using laser powder bed fusion. In: Journal of Materials Science, 58 (5). pp. 2310-2333.
Das, BK and Kumar, P and Sau, H (2023) DETERMINING SETS FOR HOLOMORPHIC FUNCTIONS ON THE SYMMETRIZED BIDISK. In: Canadian Mathematical Bulletin .
Hoque, SJ and Kumar, P and Gopi, PC (2023) Influence of Geometric Parameters for a 100 kW Inward Flow Radial Supercritical CO2 Turbine. In: Journal of Engineering for Gas Turbines and Power, 145 (1).
Kumar, S and Mukherjee, A and Telpande, S and Mahapatra, AD and Kumar, P and Misra, A (2023) Role of the electrode-edge in optically sensitive three-dimensional carbon foam-MoS2 based high-performance micro-supercapacitors. In: Journal of Materials Chemistry A .
Ramakrishnan, RK and Mishra, A and Kumar, P and Kaushalram, A and Samad, SA and Hegde, G and Talabattula, S (2023) Integrated multi-mode waveguide devices for quantum communication. In: Journal of Optics (India) .
Kumar, P and Sahana, D and Chandrashekar, LN and Jeyaseelan, A and Nayak, MM and Pratap, R and Pillai, G (2023) Ultrasensitive Pressure Sensor Based on an Integrated Circular Piezoelectric MEMS Resonator and Diaphragm Structure. In: IEEE Sensors Letters, 7 (12). pp. 1-4.
Shastri, V and Talukder, S and Roy, K and Kumar, P and Pratap, R (2022) Manipulating liquid metal flow for creating standalone structures with micro-and nano-scale features in a single step. In: Nanotechnology, 33 (45).
Kanjilal, A and Narayanan, PR and Agilan, M and Kumar, P (2022) Effect of Joint Size on Creep Behavior of Sn-Ag-Cu Solder-Cu Joints. In: Journal of Electronic Materials .
Jindal, A and Kumar, P (2022) Rational Penta-Inner Functions and the Distinguished Boundary of the Pentablock. In: Complex Analysis and Operator Theory, 16 (8).
Singh, YP and Kingson, O and Sharma, KM and Ghosh, P and Patnaik, R and Tiwari, RP and Pattanaik, JK and Kumar, P and Thomas, H and Singh, NP and Singh, NA (2022) Evolution of the Permo-Triassic Satpura Gondwana Basin, Madhya Pradesh, India: Insights from geochemical provenance and palaeoclimate of the siliciclastic sediments. In: Geological Journal .
Singh, SP and Jayaram, V and Srinivasan, D and Kumar, P (2022) High throughput determination of creep behavior of additively manufactured AlSi10Mg alloy. In: Additive Manufacturing, 58 .
Kumar, P and Philip, JT and Wani, MF and Rai, H and Vashishtha, H and Kuriachen, B and Kumar, D (2022) Study of Tribological Properties of EN8 Steel against Inconel X-750 Alloy under Dry and Lubricated Conditions. In: Transactions of the Indian Institute of Metals .
Kumar, P and Saxena, A (2022) An improved Material Mask Overlay Strategy for the desired discreteness of pressure-loaded optimized topologies. In: Structural and Multidisciplinary Optimization, 65 (10).
Cheredath, A and Uppangala, S and Asha, CS and Jijo, A and Vani Lakshmi, R and Kumar, P and Joseph, D and GA, NG and Kalthur, G and Adiga, SK (2022) Combining Machine Learning with Metabolomic and Embryologic Data Improves Embryo Implantation Prediction. In: Reproductive Sciences .
Singh, SP and Rijal, A and Straub, T and Han, J-K and Kennerknecht, T and Eberl, C and Kawasaki, M and Kumar, P (2022) Effect of high-pressure torsion on high cycle fatigue of commercially pure Cu: Some insights from formation of surface micro-cracks. In: Materials Characterization, 190 .
Vishwakarma, BD and Ramsankaran, RAAJ and Azam, MF and Bolch, T and Mandal, A and Srivastava, S and Kumar, P and Sahu, R and Navinkumar, PJ and Tanniru, SR and Javed, A and Soheb, M and Dimri, AP and Yadav, M and Devaraju, B and Chinnasamy, P and Reddy, MJ and Murugesan, GP and Arora, M and Jain, SK and Ojha, CSP and Harrison, S and Bamber, J (2022) Challenges in Understanding the Variability of the Cryosphere in the Himalaya and Its Impact on Regional Water Resources. In: Frontiers in Water, 4 .
Kassner, ME and Oros, T and Kumar, P (2022) Comments on the Mechanism of Detachment in Creep of Dispersion Strengthened Alloys at High Temperatures. In: Metals, 12 (7).
Bhattacharyya, T and Kumar, P and Sau, H (2022) DISTINGUISHED VARIETIES THROUGH THE BERGER-COBURN-LEBOW THEOREM. In: Analysis and PDE, 15 (2). pp. 477-506.
Malleswararao, K and Aswin, N and Kumar, P and Dutta, P and Srinivasa Murthy, S (2022) Experiments on a novel metal hydride cartridge for hydrogen storage and low temperature thermal storage. In: International Journal of Hydrogen Energy, 47 (36). pp. 16144-16155.
Kumar, P (2022) HoneyTop90: A 90-line MATLAB code for topology optimization using honeycomb tessellation. In: Optimization and Engineering .
Shastri, V and Talukder, S and Roy, K and Kumar, P and Pratap, R (2022) Spontaneous Formation of Structures with Micro- and Nano-Scopic Periodic Ripple Patterns. In: ACS Omega, 7 (14). pp. 12111-12119.
Kumar, P (2022) Topology optimization of stiff structures under self-weight for given volume using a smooth Heaviside function. In: Structural and Multidisciplinary Optimization, 65 (4).
Rasamsetty, A and Mehta, S and Ansari, KU and Kumar, P and Mondal, A and Shanmugam, M (2022) Six-coordinated dinuclear lanthanide(iii) amide complexes: investigation of magnetization relaxation dynamics and their electronic structures. In: Dalton Transactions, 51 (1). pp. 63-68.
Kumar, P and Zhu, K and Gao, X and Wang, S-D and Lanza, M and Thakur, CS (2022) Hybrid architecture based on two-dimensional memristor crossbar array and CMOS integrated circuit for edge computing. In: npj 2D Materials and Applications, 6 (1).
Kumar, P and Joshi, P and Basumatary, J and Mondal, PP (2022) Light sheet based volume flow cytometry (VFC) for rapid volume reconstruction and parameter estimation on the go. In: Scientific Reports, 12 (1).
Hijazi, F and Srinivasan, D and Roy, B and Kumar, P and Jayaram, V (2022) Micro-texture regions in rolled Ti-6Al-4V under polarized light. In: Scripta Materialia, 213 .
Kanjilal, A and P, RN and Kumar, P (2022) Size dependent creep deformation of elastically constrained compliant metallic joints. In: Materialia, 21 .
Chanakya, PP and Khamari, B and Lama, M and Peketi, ASK and Kumar, P and Nagaraja, V and Bulagonda, EP (2021) Complete genome sequence of an extensively drug resistant (XDR) M. morganii SMM01 isolated from a patient with urinary and fecal incontinence. In: BMC Genomic Data, 22 (1).
Madhav, HV and Raghavendra, V and Kumar, P and Ambirajan, A and Dutta, P (2021) Development of a Canister Module for PCM Coupled Heat Pipe in Spacecraft Thermal Management. In: IEEE Transactions on Components, Packaging and Manufacturing Technology, 11 (11). pp. 1804-1815.
Sathish, S and Kumar, P (2021) Equation of state based analytical formulation for optimization of sCO2 Brayton cycle. In: Journal of Supercritical Fluids, 177 .
Kumar, S and Abraham, E and Kumar, P and Pratap, R (2021) Introducing Water Electrolithography. In: ACS Omega, 6 (39). pp. 25692-25701.
Sunder, R and Raut, D and Jayaram, V and Kumar, P and Shastri, V (2021) Near-tip residual stress as an independent load interaction mechanism. In: International Journal of Fatigue, 151 .
Kalkal, A and Kumar, S and Kumar, P and Pradhan, R and Willander, M and Packirisamy, G and Kumar, S and Malhotra, BD (2021) Recent advances in 3D printing technologies for wearable (bio)sensors. In: Additive Manufacturing, 46 .
Sarkar, A and Suresh, KA and Kumar, P and Jayaraman, N (2021) Strain rate and temperature dependence of collapse pressure in Langmuir monolayer of cholesteryl dimers. In: Thin Solid Films, 735 .
Lama, M and Chanakya, PP and Khamari, B and Peketi, ASK and Kumar, P and Muddu, GK and Nagaraja, V and Bulagonda, EP (2021) Genomic analysis of a multidrug-resistant Brucella anthropi strain isolated from a 4-day-old neonatal sepsis patient. In: Journal of Global Antimicrobial Resistance, 26 . pp. 227-229.
Kumar, P and Kedaria, D and Mahapatra, C and Mohandas, M and Chatterjee, K (2021) A designer cell culture insert with a nanofibrous membrane toward engineering an epithelial tissue model validated by cellular nanomechanics. In: Nanoscale Advances, 3 (16). pp. 4714-4725.
Lal, D and Kumar, P and Bathe, R and Sampath, S and Jayaram, V (2021) Effect of microstructure on fracture behavior of freestanding plasma sprayed 7 wt.% Y2O3 stabilized ZrO2. In: Journal of the European Ceramic Society, 41 (7). pp. 4294-4301.
Pulusu, CP and Khamari, B and Lama, M and Peketi, ASK and Kumar, P and Nagaraja, V and Bulagonda, EP (2021) Draft genome sequence of pandrug-resistant Pseudomonas aeruginosa SPA03, Isolated from a patient with benign prostatic hyperplasia. In: Microbiology Resource Announcements, 10 (22).
Kumar, M and Kalra, N and Singh, H and Sharma, S and Singh Rawat, P and Kumar Singh, R and Kumar Gupta, A and Kumar, P and Ravindranath, NH (2021) Indicator-based vulnerability assessment of forest ecosystem in the Indian Western Himalayas: An analytical hierarchy process integrated approach. In: Ecological Indicators, 125 .
Sonawane, D and Kumar, P (2021) Stability of Cu-islands formed on Si substrate via 'dewetting' under subsequent thermal cycling. In: Nanotechnology, 32 (19).
Kumar, P and Langelaar, M (2021) On topology optimization of design-dependent pressure-loaded three-dimensional structures and compliant mechanisms. In: International Journal for Numerical Methods in Engineering, 122 (17). p. 4787.
Joglekar, A and Gurrala, G and Kumar, P and Joseph, FC and Kiran, TS and Sahasranand, KR and Tyagi, H (2021) Open-Source Heterogeneous Constrained Edge-Computing Platform for Smart Grid Measurements. In: IEEE Transactions on Instrumentation and Measurement, 70 .
Kumar, P and Seema, Seema and Gupta, M and Avasthi, S (2021) Fully dense, highly conductive nanocrystalline TiN diffusion barrier on steel via reactive high power impulse magnetron sputtering. In: Thin Solid Films, 722 .
Sathish, S and Kumar, P and Nassar, A (2021) Analysis of a 10 MW recompression supercritical carbon dioxide cycle for tropical climatic conditions. In: Applied Thermal Engineering, 186 .
Chandrasekhar, M and Choudhary, A and Khatua, DK and Kumar, P (2021) Enhanced energy storage performance of SrTiO 3 modified Bi0.5Na0.5TiO3â-BaTiO3â-Bi0.5K0.5TiO3 ceramics. In: Journal of Materials Science: Materials in Electronics, 32 (05). pp. 5316-5324.
Kavil, SP and Bala, PR and Ghosh, D and Kumar, P and Sukumar, R (2021) Climate Change and the Migration of a Pastoralist People c. 3500 cal. Years BP Inferred from Palaeofire and Lipid Biomarker Records in the Montane Western Ghats, India. In: Environmental Archaeology .
Vani, V and Vasan, SS and Adiga, SK and Varsha, SR and Sachdeva, G and Kumar, P and Seshagiri, PB (2021) Soluble human leukocyte antigen-G is a potential embryo viability biomarker and a positive predictor of live-births in humans. In: American Journal of Reproductive Immunology .
Raj, AV and Jamwal, P and Anju, AK and Kumar, P and Biswas, D and Rao, L and Helliwell, R and Richards, S and Ellis, R and Koseoglu, N and Yeluripati, J and Connelly, S (2021) A novel approach to baseline water quality assessment at local and catchment scale: a case study from Berambadi, India. In: Environmental Monitoring and Assessment, 193 (12).
Kumar, P and Jithin, MA and Mohan, S and Avasthi, S (2020) Hundred-fold reduction in Iron diffusivity in titanium nitride diffusion barrier on steel by microstructure engineering. In: Thin Solid Films, 716 .
Kumar, K and Gupta, HK and Kumar, P (2020) Analysis of a hybrid transcritical CO2 vapor compression and vapor ejector refrigeration system. In: Applied Thermal Engineering, 181 .
Sonawane, D and Kumar, P (2020) New insights into fracture of Si in Cu-filled through silicon via during and after thermal annealing. In: Engineering Fracture Mechanics, 238 .
Somaiah, N and Kumar, P (2020) Effect of Thermomigration–Electromigration Coupling on Mass Transport in Cu Thin Films. In: Journal of Electronic Materials, 49 (1). pp. 96-108.
Somaiah, N and Kanjilal, A and Kumar, P (2020) Effects of an interfacial layer on stress relaxation mechanisms active in the Cu-Si thin film system during thermal cycling. In: MRS Communications, 10 (1). pp. 164-172.
Sonawane, D and Ramamurthy, PC and Kumar, P (2020) Mechanical Reliability of Photovoltaic Cells under Cyclic Thermal Loading. In: Journal of Electronic Materials, 49 (1). pp. 59-71.
Jalali, SIA and Kumar, P and Jayaram, V (2020) Microstructural equivalence between bending and uniaxial creep. In: Scripta Materialia, 186 . pp. 99-103.
Jagtap, P and Kumar, P (2020) Whisker Growth in Sn Coatings: A Review of Current Status and Future Prospects. In: Journal of Electronic Materials . (In Press)
Singh, SP and Kumar, P and Kassner, ME (2020) The low-stress and high-temperature creep in LiF single crystals: An explanation for the So-called Harper-Dorn creep. In: Materialia, 13 .
Agrawal, P and Kumar, H and Kumar, P (2020) Rapid and even spreading of complex fluids over a large area in porous substrates. In: Applied Physics Letters, 117 (7).
Kumar, S and Telpande, S and Manikandan, V and Kumar, P and Misra, A (2020) Novel electrode geometry for high performance CF/Fe2O3based planar solid state micro-electrochemical capacitors. In: Nanoscale, 12 (37). pp. 19438-19449.
Ghosh, R and Telpande, S and Gowda, P and Reddy, SK and Kumar, P and Misra, A (2020) Deterministic Role of Carbon Nanotube-Substrate Coupling for Ultrahigh Actuation in Bilayer Electrothermal Actuators. In: ACS Applied Materials and Interfaces, 12 (26). pp. 29959-29970.
Rijal, A and Singh, SP and Han, J-K and Kawasaki, M and Kumar, P (2020) Effect of High-Pressure Torsion on Hardness and Electrical Resistivity of Commercially Pure Cu. In: Advanced Engineering Materials, 22 (1).
Sharma, M and Kumar, P and Irzhak, AV and Kumar, S and Pratap, R and von Gratovski, SV and Shavrov, VG and Koledov, VV (2020) Melting and Electromigration in Thin Chromium Films. In: Physics of the Solid State, 62 (6). pp. 988-992.
Tan, P and Kumar, P and Dutta, I (2020) A cutting mechanism map for machining metallic sheets using electric current pulses. In: Engineering Research Express, 2 (2).
Sonawane, D and Choudhury, A and Kumar, P (2020) New Insights into Dewetting of Cu Thin Films Deposited on Si. In: Langmuir, 36 (20). pp. 5534-5545.
Sharma, D and Dutta, I and Kumar, P (2020) A technique for machining thin metallic foils using electromagnetic mechanical pulsed loading. In: Engineering Research Express, 2 (1).
Afzal Jalali, SI and Kumar, P and Jayaram, V (2020) High Throughput Determination of Creep Parameters Using Cantilever Bending: Part II-Primary and Steady-State through Uniaxial Equivalency. In: Journal of Materials Research, 35 (4). pp. 362-371.
Jalali, SIA and Kumar, P and Jayaram, V (2020) High Throughput Determination of Creep Parameters Using Cantilever Bending: Part i-Steady-State. In: Journal of Materials Research, 35 (4). pp. 353-361.
Kurthkoti, K and Kumar, P and Sang, PB and Varshney, U (2020) Base excision repair pathways of bacteria: New promise for an old problem. In: Future Medicinal Chemistry, 12 (4). pp. 339-355.
Jalali, SIA and Kumar, P and Jayaram, V (2020) Customized High-Temperature Bending with DIC for High-Throughput Determination of Creep Parameters: Technique, Instrumentation, and Optimization. In: JOM, 72 (12). pp. 4522-4538.
Kumar, S and Suresh, H and Sethuraman, VA and Kumar, P and Pratap, R (2020) Electric field induced patterning in Cr film under ambient conditions: AÂ chemical reaction based perspective. In: SN Applied Sciences, 2 (12).
Kumar, P and Thakar, K and Verma, NC and Biswas, J and Maeda, T and Roy, A and Kaneko, K and Nandi, CK and Lodha, S and Balakrishnan, V (2020) Polymorphic In-Plane Heterostructures of Monolayer WS2 for Light-Triggered Field-Effect Transistors. In: ACS Applied Nano Materials, 3 (4). pp. 3750-3759.
Nandi, S and Tripathi, R and Adhikary, GD and Kumar, P and Misra, A (2020) Ultrahigh Infrared Photoresponse in Titanium Sesquioxide at Mott-Insulator Transition. In: Advanced Materials Interfaces .
Rijal, A and Singh, SP and Han, JK and Kawasaki, M and Kumar, P (2019) Effect of HPT processing followed by long term natural ageing on mechanical and electrical properties of commercially pure cu. In: Letters on Materials, 9 (4 Spec). pp. 561-565.
Singh, SP and Huang, X-R and Kumar, P and Kassner, ME (2019) Short communication: Assessment of the dislocation density using X-ray topography in Al single crystals annealed for long times near the melting temperature. In: Materials Today Communications, 21 .
Rajendran, CP and Sanwal, J and John, B and Anandasabari, K and Rajendran, K and Kumar, P and Jaiswal, M and Chopra, S (2019) Footprints of an elusive mid-14th century earthquake in the central Himalaya: Consilience of evidence from Nepal and India. In: Geological Journal, 54 (5). pp. 2829-2846.
Sharma, D and Kumar, P (2019) Failure of thin metallic conductors under electric current loading: Transition from sharp crack to blow-hole. In: Engineering Fracture Mechanics, 208 . pp. 221-237.
Chandrasekhar, M and Jayarao, G and Khatua, Dipak Kumar and Kumar, P (2019) Effect of NaNbO3 addition on structure, dielectric and energy storage properties of lead free piezoelectric Bi0.5Na0.5TiO3-K0.5Na0.5NbO3 ceramics. In: CERAMICS INTERNATIONAL, 45 (2, A). pp. 1969-1976.
Choudhury, K and Singh, RK and Kumar, P and Ranjan, M and Srivastava, A and Kumar, A (2019) Effect of confined geometry on the size distribution of nanoparticles produced by laser ablation in liquid medium. In: Nano-Structures and Nano-Objects, 17 . pp. 129-137.
Somaiah, N and Kumar, P (2018) Tuning electromigration-thermomigration coupling in Cu/W Blech structures. In: Journal of Applied Physics, 124 (18).
Pavaskar, G and Ramakrishnasubramanian, K and Kandagal, VS and Kumar, P (2018) Modeling electric double-layer capacitors using charge variation methodology in Gibbs ensemble. In: Frontiers in Energy Research, 5 (1).
Paul, A and Kumar, P and Surolia, A and Vijayan, M (2017) Biochemical and structural studies of mutants indicate concerted movement of the dimer interface and ligand-binding region of Mycobacterium tuberculosis pantothenate kinase. In: ACTA CRYSTALLOGRAPHICA SECTION F-STRUCTURAL BIOLOGY COMMUNICATIONS, 73 (11). pp. 635-643.
Yadavalli, S and Jayaram, S and Manda, S S and Madugundu, A K and Nayakanti, D S and Tan, T Z and Bhat, R and Rangarajan, A and Chatterjee, A and Gowda, H and Thiery, J P and Kumar, P (2017) Data-Driven Discovery of Extravasation Pathway in Circulating Tumor Cells. In: SCIENTIFIC REPORTS, 7 .
Chandrasekhar, M and Khatua, Dipak Kumar and Pattanayak, Ranjit and Kumar, P (2017) Dielectric relaxation and conduction mechanism studies of BNT-BT-BKT ceramics. In: JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 111 . pp. 160-166.
Smith, K K and Kassner, M E and Kumar, P (2017) Long-term annealing of high purity aluminum single crystals: New insights into Harper-Dorn creep. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 705 . pp. 1-5.
Kumar, P and Dutta, I (2017) Response to ``Comment on `Electric current induced flow of liquid metals: Mechanisms and substrate-surface effects''' J. Appl. Phys. 121, 136102 (2017)]. In: JOURNAL OF APPLIED PHYSICS, 121 (13).
Huang, Z and Kumar, P and Dutta, I and Sidhu, R and Renavikar, M and Mahajan, R (2014) Effects of Microstructure and Loading on Fracture of Sn-3.8Ag-0.7Cu Joints on Cu Substrates with ENIG Surface Finish. In: JOURNAL OF ELECTRONIC MATERIALS, 43 (12). pp. 4485-4496.
Kumar, P and Howarth, J and Dutta, I (2014) Electric current induced flow of liquid metals: Mechanism and substrate-surface effects. In: JOURNAL OF APPLIED PHYSICS, 115 (4).
Huang, Z and Kumar, P and Dutta, I and Sidhu, R and Renavikar, M and Mahajan, R (2014) Incorporation of Interfacial Intermetallic Morphology in Fracture Mechanism Map for Sn-Ag-Cu Solder Joints. In: JOURNAL OF ELECTRONIC MATERIALS, 43 (1). pp. 88-95.
Huang, Z and Kumar, P and Dutta, I and Pang, JHL and Sidhu, R (2014) A general methodology for calculating mixed mode stress intensity factors and fracture toughness of solder joints with interfacial cracks. In: ENGINEERING FRACTURE MECHANICS, 131 . pp. 9-25.
Kumar, P and Sriprakash, G and Rukmani, K and Ramesh, KP and Muthu, DVS (2013) Anomalous optical phonons in Cs-0.9(NH4)(0.1)H2AsO4: a temperature-dependent Raman study. In: AIP Advances, 3 (6). 062123_1-062123_7.
Kumar, P and Mishra, A and Watt, T and Watt, I and Bourell, DL and Sahaym, U (2013) Electromagnetic jigsaw: metal-cutting by combining electromagnetic and mechanical Forces. In: PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM), 6 . pp. 600-604.
Gurao, NP and Kumar, P and Sarkar, A and Brokmeier, HG and Suwas, Satyam (2013) Simulation of Deformation Texture Evolution During Multi Axial Forging of Interstitial Free Steel. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 22 (4). pp. 1004-1009.
Das, B and Kumar, P and Rao, CNR (2012) Factors Affecting Laser-Excited Photoluminescence from ZnO Nanostructures. In: Journal of Cluster Science, 23 (3). pp. 649-659.
Lakshmi, H and Kumar, Vinay MC and Raghunath, * and Kumar, P and Ramanarayanan, V and Murthy, KSS and Dutta, P (2010) Induction reheating of A356.2 aluminum alloy and thixocasting as automobile component. In: Transactions of Nonferrous Metals Society of China, 20 (Suppl.). S961-S967.
Vaidyanathan, Kannan and Kumar, P and Reddy, CO and Deshmane, V and Somasundaram, K and Mukherjee, G (2010) ErbB-2 expression and its association with other biological parameters of breast cancer among Indian women. In: Indian Journal of Cancer, 47 (1). pp. 8-15.
Barman, N and Kumar, P and Dutta, Pradip (2009) Studies on transport phenomena during solidification of an aluminum alloy in the presence of linear electromagnetic stirring. In: Journal of Materials Processing Technology, 209 (18-19). pp. 5912-5923.
Kumar, P and Sulochana, P and Nirmala, G and Chandrashekar, R and Haridattatreya, M and Satchidanandam, V (2004) Impaired T Helper 1 Function of Nonstructural Protein 3–Specific T Cells in Japanese Patients with Encephalitis with Neurological Sequelae. In: Journal Of Infectious diseases, 189 (5). pp. 880-891.
Kumar, P and Chakraborty, S and Srinivasan, K and Dutta, P (2003) Studies on Transport Phenomena during Directional Solidification of a Noneutectic Binary Solution Cooled from the Top. In: Metallurgical and Materials Transactions B, 34 (6). pp. 899-909.
Kumar, P and Uchil, PD and Sulochana, P and Nirmala, G and Chandrashekar, R and Haridattatreya, M and Satchidanandam, V (2003) Screening for T cell-eliciting proteins of Japanese encephalitis virus in a healthy JE-endemic human cohort using recombinant baculovirus-infected insect cell preparations. In: Archives of Virology, 148 (8). pp. 1569-1591.
Chakraborty, S and Chakraborty, N and Kumar, P and Dutta, P (2003) Studies on turbulent momentum, heat and species transport during binary alloy solidification in a top-cooled rectangular cavity. In: International Journal of Heat and Mass Transfer, 46 (7). pp. 1115-1137.
Kumar, P and Chakraborty, S and Srinivasan, K and Dutta, P (2002) Rayleigh-Benard convection during solidification of an eutectic solution cooled from the top. In: Metallurgical and Materials Transactions B, 33 (4). pp. 605-612.
Kumar, P (1996) Excitation of multiple quantum coherences by a single nonselective radiofrequency pulse due to the breakdown of the high-field approximation. In: Chemical Physics Letters, 259 (5-6). pp. 611-613.
Kumar, P and Kumar, Anil (1995) Effect of Dipolar Cross Correlations on the Transverse Relaxation of Single- and Multiple-Quantum Coherences in Strongly Coupled Spin Systems. In: Journal of Magnetic Resonance, Series A, 115 (2). pp. 155-164.
Sharma, A and Kumar, P and Ambirajan, A (2022) Scaling Radiation in Planar Participating Anisotropically Scattering Gray Media Under Radiative Equilibrium. In: Journal of Thermophysics and Heat Transfer, 36 (1). pp. 226-232.
Lama, M and Chanakya, PP and Khamari, B and Peketi, ASK and Kumar, P and Nagaraja, V and Bulagonda, EP (2021) Genomic and phylogenetic analysis of a multidrug-resistant Burkholderia contaminans strain isolated from a patient with ocular infection. In: Journal of Global Antimicrobial Resistance, 25 . pp. 323-325.
