|
 | Up a level |
Raj, Ashok J and Kailas, Satish V (2016) Effect of strain rate response and pin diameter on mechanically mixed layer formation and wear mechanisms in a Ti6Al4V-SS316L pair. In: Malaysian International Tribology Conference (MITC), NOV 16-17, 2015, Penang, MALAYSIA, pp. 137-138.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2012) Factors influencing stick-slip motion: effect of hardness, crystal structure and surface texture. In: ASME/STLE International Joint Tribology Conference, OCT 24-26, 2011, Los Angeles, CA, USA, pp. 71-73.
Mannekote, Jagadeesh K and Kailas, Satish V and Naik, RT (2009) Condition monitoring of vegetable oils used in a 4 stroke engine as lubricants. In: TRIBO-INDIA Conference, on Tribology of Automotive Systems, December 2009.
Mannekote, Jagadeesh K and Kailas, Satish V (2009) Performance evaluation of vegetable oils as lubricant in a four stroke engine. In: World Tribology conference 2009, Sep 12-15, 2009, kyoto, Japan.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2009) Influence of inclination angle of plate on friction, stick-slip and transfer layer-A study of magnesium pin sliding against steel plate. In: 17th International Conference on Wear of Materials, APR 19-23, 2009, Las Vegas, pp. 476-484.
Menezes, Pradeep L and *, Kishore and Kailas, Satish V (2009) Studies on friction and formation of transfer layer when Al-4Mg alloy pins slid at various numbers of cycles on steel plates of different surface texture. In: 17th International Conference on Wear of Materials, APR 19-23, 2009, Las Vegas, pp. 525-534.
Kailas, Satish V and Kumar, K (2009) Friction Stir Welding. In: 2nd International Conference on Recent Advances in Material Processing technology, 2009, February, Kovilpatti.
Pottirayil, Anirudhan and Menezes, Pradeep L and Kailas, Satish V (2009) Correlating The Features Of Topography To Friction By Sliding Experiments. In: 9th Biennial Conference on Engineering Systems Design and Analysis, JUL 07-09, 2008, Haifa, Israel, pp. 361-364.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2009) Effect Of Directionality Of Grinding Marks On Friction And Formation Of Transfer Layer. In: 9th Biennial Conference on Engineering Systems Design and Analysis, JUL 07-09, 2008, Haifa, Israel., pp. 307-314.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2009) Friction and transfer layer formation in FCC metals: Role of surface texture and roughness parameters. In: 64th STLE Annual Meeting & Exhibition Florida, 2009, USA.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2009) Friction in metal forming processes – A study using experiments and simulation. In: 64th STLE Annual Meeting & Exhibition Florida, 2009, USA.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2009) Influence of alloying element addition on friction and transfer layer formation in Al-Mg system: Role of Surface texture. In: ASME/STLE International Joint Tribology Conference (IJTC2009) Tennessee, 2009, USA.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2009) Influence of tilt angle and grinding angle of the plate on friction and transfer layer formation. In: World Tribology Congress IV Kyoto, 2009, Japan.
Mannekote, Jagadeesh K and Kailas, Satish V (2009) Influence of unsaturation on boundary lubrication properties of few oxidized neat vegetable oils. In: TRIBO-INDIA Conference, on Tribology of Automotive Systems, December, 2009.
Kumar, K and Kailas, Satish V (2008) An experimental analysis on a friction stir welding defect (joint-line-remnant). In: Presented at the Symposium on Joining of Materials (SOJOM), Tiruchirappalli, December, Tiruchirappalli.
Kumar, K and Kailas, Satish V (2008) Friction in Friction Stir Welding. In: International Conference on Industrial Tribology, New Delhi, November, New Delhi.
Kumar, K and Kailas, Satish V (2008) Influence of welding parameters on the weld formation and modeling of FSW. In: Workshop on Friction Stir Welding and Surfacing of Materials, Golden Jubilee Celebrations of DRDO, DMRL, Hyderabad, March, Hyderabad.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Effect of directionality of grinding marks on coefficient of friction and formation of transfer layer. In: 9th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA 2008), July 7-9, Haifa, Israel, July 7-9, Haifa.
Jha, Kaushal and Umashankar, C and Kutty, TRG and Bhasin, Vivek and Mahule, KN and Kailas, Satish V and Deb, Anindya (2008) Effect of pore size and distribution on energy absorption of aluminum foams under compressive load. In: EUFOAM-2008, ESTEC, Netherlands, 8-10 July, 2008, 8-10 July, 2008, Netherlands.
Jha, Kaushal and Umashankar, C and Kutty, TRG and Bhasin, Vivek and Mahule, KN and Kailas, Satish V and Deb, Anindya (2008) Energy absorbing behaviour of aluminium base foams. In: IC-ICAME, July 2-5, Bangalore, July 2-5, Bangalore.
Kailas, Satish V and Kumar, K (2008) Friction Stir Welding - A Solid State Welding Process. In: National conference on recent trends in mechanical engineering sciences, SSIT, Tumkur, Feb, SSIT, Tumkur.
Kailas, Satish V and Kumar, K (2008) Influence of tilt angle of plate on friction and transfer layer - a study of aluminium pin sliding against steel plate. In: International Conference on Materials for the Future (ICMF 2008), Thrissur, Jan., Thrissur.
Kailas, Satish V (2008) Invited talk on Selection of Materials for Design, Momentum 2008. In: Momentum 2008,Thrissur.
Kumar, K and Kailas, Satish V (2008) Optimization of friction stir welding parameters for precipitation hardenable aluminum alloys 7020 and 6061. In: International Conference on Advances in Manufacturing Technology (ICAMT 2008) for Young Engineers, February 6-8, Chennai, February 6-8, Chennai.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Studies on friction and formation of transfer Layer in HCP metals. In: 9th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA 2008), July 7-9, Haifa, Israel, July 7-9, Haifa.
Anirudhan, P and Menezes, Pradeep L and Kailas, Satish V (2008) Tribological characterisation of surfaces from the friction point of view. In: 9th Biennial 1ASME Conference on Engineering Systems Design and Analysis (ESDA 2008), July 7-9, Haifa, Israel., July 7-9, Haifa.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) The role of strain rate response on transfer layer formation during sliding. In: 1st International conference on Abrasive Processes, 21-25 September, Cambridge, U.K, 21-25 September, Cambridge.
Kailas, Satish V and Sengupta, AK and Kutty, TRG and Prashanth, GBN (2007) Design and Development of High Temperature (1873K) Micro-indenters - Vickers, Knoop and Berkovich. In: Annual technical Meeting of IIM, , November 15-16, 2007, Mumbai.
Solomon, Christopher S and Sinha, PP and Suresh, MR and Kailas, Satish V (2007) Friction in Bulk plastic deformation. In: National Aerospace Manufacturers Seminar, NAMS-2007, , Dec 6-7, 2007, Thiruvanathapuram.
Kailas, Satish V and Kumar, K (2007) Optimization of Friction Stir Welding Parameters study on Aluminium alloys. In: National Aerospace Manufacturers Seminar, NAMS-2007, , Dec 6-7, 2007, Thiruvananthapuram.
Kumar, K and Kailas, Satish V (2007) Optimization of friction stir welding parameters for AA6061-T6. In: Annual technical Meeting of IIM, , November 15-16, 2007, Mumbai.
Kumar, K and Kailas, Satish V (2007) Optimization of friction-stir welding parameters for a precipitation hardenable aluminum alloy. In: Invited talk presented at the International Conference on Processing and Fabrication of Advanced Materials, , 17-19 December, 2007, Singapore.
Kumar, K and Kailas, Satish V (2007) Production of bulk-nano materials by friction-stir processing. In: Invited talk presented at the International Conference on Processing and Fabrication of Advanced Materials, , 17-19 December, 2007, Singapore.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2007) Response of Materials during sliding on various surface textures. In: ASME/STLE 2007 International Joint Tribology Conference (IJTC2007) , October 22–24, 2007, San Diego, California.
Kailas, Satish V and Mannekote, Jagadeesh Kumar (2007) Value addition in Coconut- Testing and Characterization of biodegradable lubricant from coconut oil. In: The second International Coconut Summit. , 9-11 May 2007, Kochi.
Kumar , K and Srivatsan, TS and Kailas, Satish V (2007) An insight into understanding the intrinsic mechanisms governing the formation of friction stir welds in joining of metals. In: The International Conference on Processing and Fabrication of Advanced Materials, , 17-19 December, 2007, Singapore.
Anirudhan, P and Menezes, Pradeep L and Kailas, Satish V (2006) Deduction of a parameter characterizing the plowing nature of surfaces from sliding experiments. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.
Menezes, Pradeep L and Kailas, Satish V and Kishore, * (2006) Effect of Surface Topography on Friction and Transfer Layer Formation during Sliding. In: Proceedings of The Third Asia International Conference on Tribology ASIATRIB 2006 , 2006, Kanazawa, Japan.
Ranganatha, S and Kailas, Satish V (2006) Estimation of shear force and morphology of wear track, while sliding hard spherical indenter on soft plate and comparing with experimental results. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.
Ramesh, M and Simha, KRY and Kailas, Satish V (2006) High Frequency Fretting Fatigue in Cylinders. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.
Menezes, Pradeep L and Kailas, Satish V and Kishore, * and Kumar, K (2006) Influence of Friction During Forming Processes - A Study Using Numerical Simulation Technique. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.
Menezes, Pradeep L and Kailas, Satish V and Kishore, * (2006) Influence of Roughness Parameters on Friction and Transfer Layer Formation. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) The Role of Surface Texture on Friction and Transfer Layer Formation - A Study of Aluminium and Steel Pair using Pin-on-Plate Sliding Tester. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.
Kumar, Pradeep C and Kailas, Satish V and Menezes, Pradeep L (2006) Role of Surface Texture on Friction and Wear Under Boundary Lubricated Conditions. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.
Menezes, Pradeep L and Kailas, Satish V and Shimjith, M (2006) Role of Surface texture on Friction and Transfer Layer Formation when Mg-8Al Alloy Slid Against Steel Counterface. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.
Kumar, K and Kailas, Satish V (2006) An investigation on friction in stir welding. In: International Conference on Industrial Tribology (ICIT), Nov 30–Dec 2 2006, IISc, Bangalore, India.
Kumar, K and Kailas, Satish V (2006) An investigation on the mechanism of friction-stir weld formation and tool design. In: International Conference on Trends in Product Lifecycle, Modeling, Simulation and Synthesis, Dec 18-20 2006, IISc, Bangalore.
Kailas, Satish V and Biswas, SK (1993) Material response to two-dimensional scratching by wedges. In: 9th International Conference on Wear of Materials, 13-16 April 1993, San Francisco, CA, USA, pp. 110-118.
Singh, Neera and Edachery, Vimal and Rajput, Monika and Chatterjee, Kaushik and Kailas, Satish V and Prashanth, KG (2022) Ti6Al7Nb–TiB nanocomposites for ortho-implant applications. In: Journal of Materials Research . ISSN 0884-2914
Kumar, Ajay P and Madhu, H C and Pariyar, Abhishek and Perugu, Chandra S and Kailas, Satish V and Garg, Uma and Rohatgi, Pradeep (2020) Friction stir processing of squeeze cast A356 with surface compacted graphene nanoplatelets (GNPs) for the synthesis of metal matrix composites. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 769 .
Kar, Amlan and Suwas, Satyam and Kailas, Satish V (2019) Multi-Length Scale Characterization of Microstructure Evolution and Its Consequence on Mechanical Properties in Dissimilar Friction Stir Welding of Titanium to Aluminum. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 50A (11). pp. 5153-5173.
Kar, Amlan and Kailas, Satish V and Suwas, Satyam (2019) Effect of Mechanical Mixing in Dissimilar Friction Stir Welding of Aluminum to Titanium with Zinc Interlayer. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 72 (6, SI). pp. 1533-1536.
Anbukkarasi, R and Kailas, Satish V (2019) Role of Third Material (Interlayer) on Mechanical Properties of the AA2024-Copper Joints Carried out by Friction Stir Welding (FSW). In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 72 (6, SI). pp. 1603-1606.
Murugan, Balamagendiravarman and Thirunavukarasu, Gopinath and Kundu, Sukumar and Kailas, Satish V (2019) Influence of Tool Traverse Speed on Structure, Mechanical Properties, Fracture Behavior, and Weld Corrosion of Friction Stir Welded Joints of Aluminum and Stainless Steel. In: ADVANCED ENGINEERING MATERIALS, 21 (2).
Kar, Amlan and Suwas, Satyam and Kailas, Satish V (2019) Microstructural Modification and High-Temperature Grain Stability of Aluminum in an Aluminum-Titanium Friction Stir Weld with Zinc Interlayer. In: JOM, 71 (1). pp. 444-451.
Kar, Amlan and Suwas, Satyam and Kailas, Satish V (2019) Significance of tool offset and copper interlayer during friction stir welding of aluminum to titanium. In: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 100 (1-4). pp. 435-443.
Noor El-Din, MR and Mishrif, Marwa R and Kailas, Satish V and Suvin, PS and Mannekote, Jagadeesh K (2018) Studying the lubricity of new eco-friendly cutting oil formulation in metal working fluid. In: INDUSTRIAL LUBRICATION AND TRIBOLOGY, 70 (9). pp. 1569-1579.
Kar, Amlan and Kailas, Satish V and Suwas, Satyam (2018) Effect of Zinc Interlayer in Microstructure Evolution and Mechanical Properties in Dissimilar Friction Stir Welding of Aluminum to Titanium. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 27 (11). pp. 6016-6026.
Kar, Amlan and Choudhury, Sounak K and Suwas, Satyam and Kailas, Satish V (2018) Effect of niobium interlayer in dissimilar friction stir welding of aluminum to titanium. In: MATERIALS CHARACTERIZATION, 145 . pp. 402-412.
Dixit, Saurabh and Kashyap, Sanjay and Kailas, Satish V and Chattopadhyay, K (2018) Manufacturing of high strength aluminium composites reinforced with nano tungsten particles for electrical application and investigation on in-situ reaction during processing. In: JOURNAL OF ALLOYS AND COMPOUNDS, 767 . pp. 1072-1082.
Madhu, H C and Kailas, Satish V (2018) Fabrication of localised aluminium foam by a novel polymeric blowing agent. In: MATERIALS CHARACTERIZATION, 142 . pp. 340-351.
Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2018) Development of microstructure and texture during single and multiple pass friction stir processing of a strain hardenable aluminium alloy. In: MATERIALS CHARACTERIZATION, 140 . pp. 134-146.
Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2018) Development of microstructure and texture during single and multiple pass friction stir processing of a strain hardenable aluminium alloy. In: MATERIALS CHARACTERIZATION, 140 . pp. 134-146.
Murugan, Balamagendiravarman and Thirunavukarasu, Gopinath and Kundu, Sukumar and Kailas, Satish V and Chatterjee, Subrata (2018) Interfacial Microstructure and Mechanical Properties of Friction Stir Welded Joints of Commercially Pure Aluminum and 304 Stainless Steel. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 27 (6, SI). pp. 2921-2931.
Madhu, H C and Kumar, P Ajay and Perugu, Chandra S and Kailas, Satish V (2018) Microstructure and Mechanical Properties of Friction Stir Process Derived Al-TiO2 Nanocomposite. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 27 (3). pp. 1318-1326.
Dixit, Saurabh and Mahata, Avik and Mahapatra, D Roy and Kailas, Satish V and Chattopadhyaya, K (2018) Multi-layer graphene reinforced aluminum - Manufacturing of high strength composite by friction stir alloying. In: COMPOSITES PART B-ENGINEERING, 136 . pp. 63-71.
Mannekote, Jagadeesh K and Kailas, Satish V and Venkatesh, K and Kathyayini, N (2018) Environmentally friendly functional fluids from renewable and sustainable sources-A review. In: RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 81 (2). pp. 1787-1801.
Raj, Ashok J and Pottirayil, Anirudhan and Kailas, Satish V (2017) Dry Sliding Wear Behavior of Ti-6Al-4V Pin Against SS316L Disk at Constant Contact Pressure. In: JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 139 (1).
Agrawal, Arvind K and Narayanan, R Ganesh and Kailas, Satish V (2017) End forming behaviour of friction stir processed Al 6063-T6 tubes at different tool rotational speeds. In: JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 52 (7). pp. 434-449.
Kumar, Ajay P and Yadav, Devinder and Perugu, Chandra S and Kailas, Satish V (2017) Influence of particulate reinforcement on microstructure evolution and tensile properties of in-situ polymer derived MMC by friction stir processing. In: MATERIALS & DESIGN, 113 . pp. 99-108.
Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2017) Microstructure and Texture Evolution during Single- and Multiple-Pass Friction Stir Processing of Heat-Treatable Aluminum Alloy 2024. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (9). pp. 4247-4261.
Prabu, S S Mani and Madhu, H C and Perugu, Chandra S and Akash, K and Kumar, P Ajay and Kailas, Satish V and Anbarasu, Manivannan and Palani, I A (2017) Microstructure, mechanical properties and shape memory behaviour of friction stir welded nitinol. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 693 . pp. 233-236.
Bahl, Sumit and Nithilaksh, P L and Suwas, Satyam and Kailas, Satish V and Chatterjee, Kaushik (2017) Processing-Microstructure-Crystallographic Texture-Surface Property Relationships in Friction Stir Processing of Titanium. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 26 (9). pp. 4206-4216.
Chaudhry, V and Kailas, Satish V (2015) Damage mechanisms in stainless steel and chromium carbide coatings under controlled environment fretting conditions. In: WEAR, 334 . pp. 75-81.
Menezes, Pradeep L and Kishore, Kishore and Kailas, Satish V and Lovell, Michael R (2015) Influence of Surface Texture and Roughness of Softer and Harder Counter Materials on Friction During Sliding. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 24 (1). pp. 393-403.
Castellan, Enzo and Kailas, Satish V and Madayi, Shimjith and Raj, Rishi (2015) Low-Wear High-Friction Behavior of Copper Matrix Composites Dispersed With an In Situ Polymer Derived Ceramic. In: JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 137 (2).
Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2015) Microstructure and Crystallographic Texture Evolution During the Friction-Stir Processing of a Precipitation-Hardenable Aluminum Alloy. In: JOM, 67 (5). pp. 1014-1021.
Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2015) Restoration Mechanisms During the Friction Stir Processing of Aluminum Alloys. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A (7). pp. 2823-2828.
Nadammal, Naresh and Kailas, Satish V and Suwas, Satyam (2015) A bottom-up approach for optimization of friction stir processing parameters; a study on aluminium 2024-T3 alloy. In: MATERIALS & DESIGN, 65 . pp. 127-138.
Kumar, Ajay P and Raj, Rishi and Kailas, Satish V (2015) A novel in-situ polymer derived nano ceramic MMC by friction stir processing. In: MATERIALS & DESIGN, 85 . pp. 626-634.
Chaudhry, V and Kailas, Satish V (2014) Elastic-plastic contact conditions for frictionally constrained bodies under cyclic tangential loading. In: Journal of Tribology - Transactions of the ASME, 136 (1). 011401_1-011401_17.
Chaudhry, V and Simha, KRY and Kailas, Satish V (2014) Energy based approach for the evaluation of damage under partial slip and gross sliding condition. In: WEAR, 315 (1-2). pp. 115-124.
Bobji, MS and Kailas, Satish V and Ananthasuresh, GK and Ayappa, Ganapathy and Jayaram, Vikram and Visweswariah, Sandhya S (2013) Sanjay Kumar Biswas (1945-2013). In: Current Science, 104 (12). pp. 1718-1719.
Chaudhry, V and Kailas, Satish V (2013) Damage quantification under sliding and seizure condition using first-of-a-kind fretting machine. In: WEAR, 305 (1-2). pp. 140-154.
Ramulu, Perumalla Janaki and Narayanan, Ganesh R and Kailas, Satish V (2013) Forming limit investigation of friction stir welded sheets: influence of shoulder diameter and plunge depth. In: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 69 (9-12). pp. 2757-2772.
Chaudhry, V and Kailas, Satish V (2013) Fretting studies on self-mated stainless steel and chromium carbide coated surfaces under controlled environment conditions. In: WEAR, 301 (1-2, S). pp. 524-539.
Kumar, Mukesh and Kailas, Satish V and Narayanan, Ganesh R (2013) Influence of external weld flash on the in-plane plane-strain formability of friction stir welded sheets. In: JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 48 (6). pp. 376-385.
Ramulu, Perumalla Janaki and Kailas, Satish V and Narayanan, Ganesh R (2013) Influence of tool rotation speed and feed rate on the forming limit of friction stir welded AA6061-T6 sheets. In: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 227 (C3). pp. 520-541.
Ramulu, Janaki P and Narayanan, Ganesh R and Kailas, Satish V and Reddy, Jayachandra (2013) Internal defect and process parameter analysis during friction stir welding of Al 6061 sheets. In: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 65 (9-12). pp. 1515-1528.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2013) The Role of Strain Rate Response on Tribological Behavior of Metals. In: JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 135 (1).
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2013) SELF-ORGANIZATION AND FRICTION DURING SLIDING. In: PROCEEDINGS OF THE ASME/STLE INTERNATIONAL JOINT TRIBOLOGY CONFERENCE . pp. 273-275.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2013) Tribological response of soft materials sliding against hard surface textures at various numbers of cycles. In: LUBRICATION SCIENCE, 25 (2, SI). pp. 79-99.
Devaraju, A and Perumal, Elaya A and Alphonsa, J and Kailas, Satish V and Venugopal, S (2012) Sliding wear behavior of plasma nitrided Austenitic Stainless Steel Type AISI 316LN in the temperature range from 25 to 400 degrees C at 10(-4) bar. In: WEAR, 288 . pp. 17-26.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2012) Analysis of Strain Rates and Microstructural Evaluation during Metal Forming: Role of Surface Texture and Friction. In: TRIBOLOGY TRANSACTIONS, 55 (5). pp. 582-589.
Devaraju, A and Elayaperumal, A and Alphonsa, J and Kailas, Satish V and Venugopal, S (2012) Microstructure and dry sliding wear resistance evaluation of plasma nitrided austenitic stainless steel type AISI 316LN against different sliders. In: SURFACE & COATINGS TECHNOLOGY, 207 . pp. 406-412.
Devaraju, Ayyannan and Elayaperumal, Ayyasamy and Venugopal, Srinivasan and Kailas, Satish V and Alphonsa, Joseph (2011) Investigation on the High Vacuum Tribological Characteristics of Surface Treated Nuclear Grade Stainless Steel Type AISI 316 LN at 25 to 500 degrees C. In: Strojniski Vestnik / Journal of Mechanical Engineering, 57 (12). pp. 927-935.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) Response of Materials During Sliding on Various Surface Textures. In: Journal of Materials Engineering and Performance, 20 (8). pp. 1438-1446.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) Friction and transfer layer formation in polymer-steel tribo-system: Role of surface texture and roughness parameters. In: Wear, 271 (9-10, ). pp. 2213-2221.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) The role of surface texture on friction and transfer layer formation during repeated sliding of Al-4Mg against steel. In: Wear, 271 (9-10, ). pp. 1785-1793.
Pottirayil, Anirudhan and Kailas, Satish V and Biswas, SK (2011) Lubricity of an oil in water emulsion in metal cutting: The effect of hydrophilic/lypophilic balance of emulsifiers. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 384 (1-3). pp. 323-330.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) Influence of Inclination Angle and Machining Direction on Friction and Transfer Layer Formation. In: Journal of Tribology, 133 (1).
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) Role of Surface Texture, Roughness, and Hardness on Friction During Unidirectional Sliding. In: Tribology Letters, 41 (1). pp. 1-15.
Kumar, K and Kailas, Satish V and Srivatsan, TS (2011) The Role of Tool Design in Influencing the Mechanism for the Formation of Friction Stir Welds in Aluminum Alloy 7020. In: Materials and Manufacturing Processes, 26 (7). pp. 915-921.
Pottirayil, Anirudhan and Kailas, Satish V and Biswas, SK (2010) Experimental estimation of friction force in lubricated cutting of steel. In: Wear, 269 (7-8). pp. 557-564.
Pottirayil, Anirudhan and Menezes, Pradeep L and Kailas, Satish V (2010) A parameter characterizing plowing nature of surfaces close to Gaussian. In: Tribology International, 43 (1-2). pp. 370-380.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2010) Influence of Die Surface Textures during Metal Forming-A Study Using Experiments and Simulation. In: Materials and Manufacturing Processes, 25 (9). pp. 1030-1039.
Mannekote, Jagadeesh K and Kailas, Satish V (2009) Studies on boundary lubrication properties of oxidised coconut and soy bean oils. In: Lubrication Science, 21 (9). pp. 355-365.
Menezes, Pradeep L and Kishorea, * and Kailas, Satish V (2009) Influence of surface texture and roughness parameters on friction and transfer layer formation during sliding of aluminium pin on steel plate. In: Wear, 267 (9-10). pp. 1534-1549.
Menezes, Pradeep L and Kailas, Satish V (2009) Study of Friction and Transfer Layer Formation in Copper-Steel Tribo-System: Role of Surface Texture and Roughness Parameters. In: Tribology Transactions, 52 (5). pp. 611-622.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2009) Influence of roughness parameters and surface texture on friction during sliding of pure lead over 080 M40 steel. In: International Journal of Advanced Manufacturing Technology, 43 (7-8). pp. 731-743.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2009) Studies On Friction And Formation Of Transfer Layer In Hcp Metals. In: Journal of Tribology, 131 (1). 031604 -031613.
Chelliah, Nagaraj and Kailas, Satish V (2009) Synergy between tribo-oxidation and strain rate response on governing the dry sliding wear behavior of titanium. In: Wear, 266 (7-8). pp. 704-712.
Menezes, Pradeep L and Kumar, K and Kishore, R and Kailas, Satish V (2009) Influence of friction during forming processes-a study using a numerical simulation technique. In: The International Journal of Advanced Manufacturing Technology, 40 (11-12). pp. 1067-1076.
Menezes, Pradeep L and *, Kishore and Kailas, Satish V (2009) Role of surface texture of harder surface on subsurface deformation. In: Wear, 266 (1-2). pp. 103-109.
Kumar, K and Kalyan, C and Kailas, Satish V and Srivatsan, TS (2009) An Investigation of Friction During Friction Stir Welding of Metallic Materials. In: Materials And Manufacturing Processes, 24 (4). pp. 438-445.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Effect of surface roughness parameters and surface texture on friction and transfer layer formation in tin-steel tribo-system. In: Journal of Materials Processing Technology, 208 (1-3). pp. 372-382.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) On the effect of surface texture on friction and transfer layer formation-A study using Al and steel pair. In: Wear, 265 (11-12). pp. 1655-1669.
Ramesh, M and Kailas, Satish V and Simha, KRY (2008) Axisymmetric fretting analysis in coated cylinder. In: Sadhana, 33 (3). pp. 299-327.
Simha, KRY and Pottirayil, Anirudhan and Menezes, Pradeep L and Kailas, Satish V (2008) Friction tensor concept for textured surfaces. In: Sadhana, 33 (3). pp. 203-206.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Influence of roughness parameters on coefficient of friction under lubricated conditions. In: Sadhana : Academy Proceedings in Engineering Sciences, 33 (3). pp. 181-190.
Ramesh, M and Kailas, Satish V and Simha, KRY (2008) Micro and macro contact mechanics for interacting asperities. In: Sadhana, 33 (3). pp. 329-338.
Ramesh, M and Kailas, Satish V and Simha, KRY (2008) Near surface stress analysis strategies for axisymmetric fretting. In: Sadhana, 33 (3). pp. 273-297.
Shankara, A and Menezes, Pradeep L and Simha, KRY and Kailas, Satish V (2008) Study of solid lubrication with $MoS_2$ coating in the presence of additives using reciprocating ball-on-flat scratch tester. In: Sadhana, 33 (3). pp. 207-220.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Subsurface deformation and the role of surface texture—A study with Cu pins and steel plates. In: Sadhana : Academy Proceedings in Engineering Sciences, 33 (3). pp. 191-201.
Ramesh, M and Kailas, Satish V and Simha, KRY (2008) Wave propagation in coated cylinders with reference to fretting fatigue. In: Sadhana, 33 (3). pp. 339-356.
Kumar, K and Kailas, Satish V (2008) The role of friction stir welding tool on material flow and weld formation. In: Materials Science and Engineering: A, 485 (1-2). pp. 367-374.
Kumar, K and Kailas, Satish V and Srivatsan, TS (2008) Influence of tool geometry in friction stir welding. In: Materials and Manufacturing Processes, 23 (2). pp. 188-194.
Ranganatha, S and Kailas, Satish V and Støren, Sigurd and Srivatsan, TS (2008) Role of temperature on sliding response of aluminum on steel of a hot extrusion. In: Materials and Manufacturing Processes, 23 (1). pp. 29-36.
Kumar, K and Kailas, Satish V (2008) On the role of axial load and the effect of interface position on the tensile strength of a friction stir welded aluminium alloy. In: Materials & Design, 29 (4). 791 -797.
Menezes, PL and Kishore, * and Kailas, Satish V (2006) Studies on friction and transfer layer: role of surface texture. In: Tribology Letters, 24 (3). pp. 265-273.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Effect of Roughness Parameter and Grinding Angle on Coefficient of Friction When Sliding of Al–Mg Alloy Over EN8 Steel. In: Journal of Tribology-Transactions of the ASME, 128 (4). pp. 697-704.
Uyyuru, RK and Kailas, Satish V (2006) Numerical analysis of friction stir welding process. In: Journal of Materials Engineering and Performance, 15 (5). pp. 505-518.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Influence of surface texture on coefficient of friction and transfer layer formation during sliding of pure magnesium pin on 080 M40 (EN8) steel plate. In: Wear, 261 (5-6). pp. 578-591.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Effect of directionality of unidirectional grinding marks on friction and transfer layer formation of Mg on steel using inclined scratch test. In: Materials Science and Engineering A, 429 (1-2). pp. 149-160.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Studies on friction and transfer layer using inclined scratch. In: Tribology International, 39 (2). pp. 175-183.
Jayalakshmi, S and Kailas, Satish V and Seshan, S and Fleury, E (2000) Properties of squeeze cast Mg-6Zn-3Cu alloy and its saffil alumina short fibre reinforced composites. In: Journal Of Materials Science, 41 (12). pp. 3743-3752.
Singh, Arvind R and Biswas, SK and Kailas, Satish V (1999) Sliding wear of cadmium against alumina. In: Wear, 225-22 (2). pp. 770-776.
Kailas, Satish V and Biswas, SK (1995) Strain rate response and its effect in plane strain abrasion of metals by a wedge. In: Wear, 184 (1). pp. 23-32.
Kailas, Satish V and Biswas, SK (1995) The role of strain rate response in plane strain abrasion of metals. In: Wear, 181 (part 2). pp. 648-657.
