|
 | Up a level |
Karbowniczek, M and Migas, P and Mondal, MK and Banasik, L and Suwara, E and Gupta, GS (2018) The solid fine precipitates behaviour in fesicr solution during ladle rafination. In: 27th International Conference on Metallurgy and Materials, METAL 2018, 23 - 25 May 2018, Brno, pp. 615-621.
Lollchund, MR and Gupta, GS and Mulley, NK (2009) Study of gas-fines in decreasing gas velocity in a packed bed. In: In: Engineering Our Future: Are We up to the Challenge, 27-30 September 2009, Perth, Australia.
Mondal, S and Gupta, GS (2008) Fluid dynamics study of a new vacuum degassing process. In: CHEMECA-08, Sept. 27-30, New Castle, Australia.
Maruoka, N and Lazuardi, F and Maeyama, T and Nogami, Hiroshi and Kitamura, S and Gupta, GS (2008) Influence of bottom stirring conditions on surface reaction rate. In: SCANMET III, Sweden Lulea, 8-11 June, 2008, p449-458, 8-11 June, 2008, Sweden Lulea.
Singh, V and Gupta, GS (2008) Modelling of single phase, non-wetting liquid flow in a coarse bed. In: SCANMET III, Sweden Lulea, 8-11 June, 2008, p561-567, 8-11 June, 2008, Sweden Lulea.
Mulley, NK and Gupta, GS (2008) Study of fluid dynamics in a packed bed in the presence of fines and liquid flow. In: Int. Conf. on Recent Progress on Mathematical Modelling in Ironmaking-2008, Tokyo, Japan, Oct. 16-17, 2008, p50-55, Oct. 16-17, 2008, Tokyo, Japan.
Singh, V and Gupta, GS and Kitamura, S (2007) Modelling of raceway size and shape in mixed particle system. In: Procs. 6th IAS Ironmaking Conference, , Nov 2007, Rosario, Argentina.
Gupta, GS and Kitamura, S and Ariyama, T (2007) Recent advances in blast furnace modeling in India. In: Procs. Of 54th JSPS Meeting On Iron Making Practices,, June 2007 , New Haven, Connecticut.
Singh, V and Gupta, GS (2006) Behaviour of granular material in packed bed under influence of gas injected through a nozzle. In: Proc. CHoPS-05, 2006, Sorrento, Italy.
Singh, V and Gupta, GS (2006) Study of Non-Wetting Liquid Flow in a Bed of Monosized Particle Packing under the Influence of Lateral Gas Injection, 2006. In: TMS Annual Meeting, EPD Congress 2006 , Mar 2006, San Antonio, Texas, USA.
Sarkar, S and Gupta, GS (2006) Theoretical study of stress distribution under gas cross flow condition. In: ICAMMP-2006, 3rd to 5th Feb 2006, IIT Kharagpur, India.
Lakshminarasimha, S and Bosco, FSD and Gupta, GS (2024) Quantification of powder phase transient accumulation behaviour in gas�powder�liquid flow through a packed bed with the cohesive zone of a blast furnace. In: Chemical Engineering Research and Design, 202 . pp. 49-59.
Chaitanya, GVA and Gupta, GS (2023) Liquid flow in heap leaching using the discrete liquid flow model and graph-based void search algorithm. In: Hydrometallurgy, 221 .
Chaitanya, GVA and Gupta, GS (2023) Liquid flow in heap leaching using the discrete liquid flow model and graph-based void search algorithm. In: Hydrometallurgy, 221 .
Don Bosco, FS and Kamble, S and Lakshminarasimha, S and Gupta, GS (2023) Cold-model numerical study of raceway shape and size effect on gas and fines flow behaviour in packed bed between the raceway and cohesive zone. In: Ironmaking and Steelmaking .
Chaitanya, GVA and Gupta, GS (2023) Gas–Liquid-Particle Interaction in the Lower Part of the Blast Furnace. In: Transactions of the Indian Institute of Metals .
Gadi, VA and Gupta, GS (2023) Discrete Liquid Flow Behavior in a 2D Random Packed Bed. In: ISIJ International, 63 (5). pp. 810-821.
Kamble, S and Bosco, FSD and Gupta, GS (2022) Effect of Raceway Shape and Size on Gas and Fines Flow Behavior in a Packed Bed. In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science .
Gupta, GS and Lakshminarasimha, S and Shrenik, M (2022) Quantitative Measurement of Powder Holdups in the Packed Beds. In: Transactions of the Indian Institute of Metals, 75 (2). pp. 381-395.
Lakshminarasimha, S and Maurya, A and Gupta, GS and Arun Chaitanya, GV (2022) Quantification of powder holdups in the presence of a cavity with lateral gas–powder injection in a packed bed. In: Canadian Journal of Chemical Engineering .
Kamble, S and Lakshminarasimha, S and Maurya, A and Gupta, GS (2020) Validation of Pressure Drop in Gas–Fine Flow in a Packed Bed with Various Types of Injection System (Lateral and Bottom). In: Transactions of the Indian Institute of Metals, 73 (8). pp. 2081-2087.
Raj, P and Gupta, GS and Rudolph, V (2020) Silicon carbide formation by carbothermal reduction in the Acheson process: A hot model study. In: Thermochimica Acta, 687 .
Chaitanya, GVA and Kamble, S and Lollchund, RM and Gupta, GS and Chen, Z (2020) Modelling of shaft based processes. In: Mineral Processing and Extractive Metallurgy: Transactions of the Institute of Mining and Metallurgy .
Jain, Ashish and Anthonysamy, S and Gupta, GS and Ganesan, V (2013) Processing of enriched elemental boron (B-10 similar to 65 at. %). In: Materials Chemistry and Physics, 140 (1). pp. 335-342.
Jain, Ashish and Ghosh, C and Ravindran, TR and Anthonysamy, S and Divakar, R and Mohandas, E and Gupta, GS (2013) Structural characterization of electrodeposited boron. In: BULLETIN OF MATERIALS SCIENCE, 36 (7). pp. 1323-1329.
Mondal, MK and Maruoka, N and Kitamura, S and Gupta, GS and Nogami, H and Shibata, H (2012) Study of Fluid Flow and Mixing Behaviour of a Vacuum Degasser. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 65 (3). pp. 321-331.
Jain, Ashish and Joseph, Kitheri and Anthonysamy, S and Gupta, GS (2011) Kinetics of oxidation of boron powder. In: Thermochimica Acta, 514 (1-2). pp. 67-73.
Jain, Ashish and Anthonysamy, S and Ananthasivan, K and Gupta, GS (2010) Studies on the ignition behaviour of boron powder. In: Thermochimica Acta, 500 (1-2). pp. 63-68.
Jain, Ashish and Pankajavalli, R and Anthonysamy, S and Ananthasivan, K and Babu, R and Ganesan, V and Gupta, GS (2010) Determination of the thermodynamic stability of TiB2. In: Journal of Alloys and Compounds, 491 (1-2). pp. 747-752.
Mondal, MK and Maruoka, N and Kitamura, S and Gupta, GS (2010) Enhancement in Bath Mixing and Plume area in a New Degassing Process - A Computational Fluid Dynamic Study. In: Archives of Metallurgy and Materials, 55 (4). pp. 1131-1135.
Jeyakumar, M and Kumar, S and Gupta, GS (2010) Microstructure and Properties of the Spray-Formed and Extruded 7075 Al Alloy. In: Materials and Manufacturing Processes, 25 (8). pp. 777-785.
Rao, MPLN and Gupta, GS and Manjunath, P and Kumar, S and Suri, AK and Krishnamurthy, N and Subramanian, C (2009) Temperature measurements in the boron carbide manufacturing process - A hot model study. In: International Journal of Refractory Metals and Hard Materials, 27 (3). pp. 621-628.
Jeyakumar, M and Kumar, S and Gupta, GS (2009) The Influence of Processing Parameters on Characteristics of an Aluminum Alloy Spray Deposition. In: Materials and Manufacturing Processes, 24 (6). pp. 693-699.
Sarkar, S and Gupta, GS (2008) Two-Dimensional Mathematical Modeling of the Pack Carburizing Process. In: Metallurgical and Materials Transactions A, 39 (10). pp. 2424-2434.
Jeyakumar, M and Gupta, GS and Kumar, Subodh (2008) Modeling of gas flow inside and outside the nozzle used in spray deposition. In: Journal of Materials Processing Technology, 203 (1-3). pp. 471-479.
Singh, V and Gupta, GS (2008) Behavior of Granular Material in Packed Bed Under Influence of Gas Injected Through a Nozzle. In: Particulate Science & Technology, 26 (3). pp. 214-221.
Sarkar, S and Gupta, GS (2007) Development of a Two-Dimensional Mathematical Model for Stress and Velocity Distribution in a Packed Bed. In: Metallurgical and Materials Transactions B, 38 (6). pp. 965-975.
Singh, Varsha and Gupta, GS and Sarkar, S (2007) Study of gas cavity size hysteresis in a packed bed using DEM. In: Chemical Engineering Science, 62 (22). pp. 6102-6111.
Gupta, GS and Naveen, K (2007) Quantification of Liquid Holdup in the Dropping Zone of a Blast Furnace- A Cold Model Study. In: Metallurgical and Materials Transactions B, 38 (2). pp. 203-213.
Singh, V and Gupta, GS (2006) A discrete model for non-wetting liquid flow from a point source in a packed bed under the influence of gas flow. In: Chemical Engineering Science, 61 (20). pp. 6855-6866.
Singh, V and Gupta, GS and Rajneesh, S (2006) Modelling of void initiation and breaking phenomena in a packed bed. In: Ironmaking & Steelmaking, 33 (2). pp. 101-110.
Singh, V and Gupta, GS and Rudolph, V (2006) Prediction of Minimum Spouting Velocity in Two-Dimensional Flat Bottom Spouted Beds. In: Chemical Engineering Communications, 193 (3). pp. 338-362.
Gupta, GS and Rajneesh, S and Rudolph, V and Singh, V and Sarkar, S and Litster, JD (2005) Mechanics of raceway hysteresis in a packed bed. In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 36 (6). pp. 755-764.
Basavaraj, MG and Gupta, GS and Naveen, K and Rudolph, V and Bali, R (2005) Local Liquid Holdups and Hysteresis in a 2-D Packed Bed Using X-ray Radiography. In: AIChE Journal, 51 (8). pp. 2178-2189.
Gupta, GS and Hind, G (2004) An Object-Oriented Modeling Approach in Materials Processing: Case Study of the Acheson and Carburizing Processes. In: Materials and Manufacturing Processes, 19 (2). pp. 221-242.
Rajneesh, S and Sarkar, S and Gupta, GS (2004) Prediction of Raceway Size in Blast Furnace from Two Dimensional Experimental Correlations. In: ISIJ International, 44 (8). pp. 1298-1307.
Rajneesh, S and Gupta, GS (2003) Importance of frictional forces on the formation of cavity in a packed bed under cross flow of gas. In: Powder Technology, 134 (1-2). pp. 72-85.
Sarkar, S and Gupta, GS and Litster, JD and Rudolph, V and White, ET and Choudhary, SK (2003) A cold model study of raceway hysteresis. In: Metallurgical and Materials Transactions B, 34 (2). pp. 183-191.
Sastry, GSSRK and Gupta, GS and Lahiri, AK (2003) Cold model study of raceway under mixed particle conditions. In: Ironmaking & Steelmaking, 30 (1). pp. 61-65.
Gupta, GS and Bhattacharyya, S (2003) Liquid Holdup in Non-wetting Packing with Lateral Gas Injection. In: ISIJ International, 43 (12). pp. 1927-1935.
Sastry, GSSRK and Gupta, GS and Lahiri, AK (2003) Void formation and breaking in a packed bed. In: ISIJ International, 43 (2). pp. 153-160.
Gupta, GS and Chaudhuri, A and Kumar, PV (2002) Modelling, simulation, and graphical user interface for industrial gas carburising process. In: Materials Science and Technology, 18 (10). pp. 1188-1194.
Kumar, PV and Gupta, GS (2002) Study of formation of silicon carbide in the Acheson process. In: Steel Research, 73 (2). pp. 31-38.
Basavaraj, MG and Gupta, GS (2002) Measurement of axial dispersion coefficient in a packed bed using X-ray. In: Materials and Manufacturing Processes, 17 (5). pp. 683-692.
Gupta, GS and Kumar, PV and Rudolph, VR and Gupta, M (2001) Heat-transfer model for the Acheson process. In: Metallurgical And Materials Transactions A, 32 (6). pp. 1301-1308.
Gupta, GS and Litster, JD and White, ET and Rudolph, VR (1997) Nonwetting flow of a liquid through a packed bed with gas cross-flow. In: Metallurgical and Materials Transactions B, 28 (4). pp. 597-604.
