|
 | Up a level |
Elangovan, R and Ramamurthy, TS and Dattaguru, B and Selladurai, V (2014) Analytical Determination of Residual Strength and Linkup Strength for Flat Panels, with Multiple Site Damage. In: ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 39 (3). pp. 2271-2276.
Elangovan, R and Dattaguru, B and Ramarnurthy, TS and Selladurai, V (2014) Development of design charts for stress intensity factors at tips of multi-site cracks in unstiffened curved panels. In: ENGINEERING FRACTURE MECHANICS, 119 . pp. 116-123.
Dattaguru, B and Gopalakrishnan, S (2014) Foreword to Composites for the 21st Century: Current & Future Trends. In: MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 21 (3, SI). p. 171.
Singh, Lokk and Dattaguru, B (2013) Delamination Tolerance in Composites under Fatigue Loading. In: JOURNAL OF THE INDIAN INSTITUTE OF SCIENCE, 93 (4). pp. 593-602.
Sahoo, PK and Dattaguru, B and Manjunatha, CM and Murthy, CRL. (2012) Fatigue de-bond growth in adhesively bonded single lap joints. In: SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 37 (1, SI). pp. 79-88.
Palani, GS and Iyer, Nagesh R and Dattaguru, B (2006) A generalised technique for fracture analysis of cracked plates under combined tensile, bending and shear loads. In: Computers & Structures, 84 (29-30). pp. 2050-2064.
Singh, KL and Dattaguru, B and Ramamurthy, TS (2006) Fracture analysis of delaminated composite panels in compression using numerically integrated MVCCI. In: Mechanics of Advanced Materials and Structures, 13 (4). pp. 303-315.
Palani, GS and Iyer, Nagesh R and Dattaguru, B (2006) New a posteriori error estimator and adaptive mesh refinement strategy for 2-D crack problems. In: Engineering Fracture Mechanics, 73 (6). pp. 802-819.
Bisi, A and Gopalkrishnan, S and Dattaguru, B (2006) An h-adaptive Finite Element Technique for Linear Elastic Fracture Problems. In: 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference, May 2-4 2006, USA.
Palani, Gadyam S and Iyer, Nagesh R and Dattaguru, B (2005) Fracture analysis of stiffened panels under combined tensile, bending, and shear loads. In: AIAA Journal, 43 (9). pp. 2039-2051.
Palani, GS and Dattaguru, B and Iyer, NR (2005) Fracture analysis of cracked plate panels using NI-MVCCI technique. In: 4th Conference on Creep, Fatique and Creep-Fatique Internation, OCT 08-10, 2003, Kalpakkam, INDIA.
Palani, GS and Dattaguru, B and Iyer, Nagesh R (2004) Numerically integrated modified virtual crack closure integral technique for 2-D crack problems. In: Structural Engineering and Mechanics, 18 (6). pp. 731-744.
Sarkar, Sunetra and Venkatraman, Kartik and Dattaguru, B (2004) Dynamics of Flexible Structures With Nonlinear Joints. In: Journal of Vibration and Acoustics, 126 (1). pp. 92-100.
Rao, Rama Mohan A and Rao, Appa TVSR and Dattaguru, B (2003) A new parallel overlapped domain decomposition method for nonlinear dynamic finite element analysis. In: Computers & Structures, 81 (26-27). pp. 2441-2454.
Jayadevan, KR and Narasimhan, R and Ramamurthy, TS and Dattaguru, B (2003) The effect of T-stress on plane strain dynamic crack growth in elastic-plastic materials. In: Fatigue and Fracture of Engineering Materials and Structures, 26 (7). pp. 647-660.
Dattaguru, B and Kumar, Muthu R (2003) Effect of Material Non-Linearity of Adherents on the Behaviour of Interface Cracks. In: Advances in Fracture and Damage Mechanics. 3rd International Conference on Fracture and Damage Mechanics, FDM 2003, 2-4 Sept. 2003, Paderborn, Germany, pp. 221-227.
Rao, ARM and Rao, TVSRA and Dattaguru, B (2002) Automatic decomposition of unstructured meshes employing genetic algorithms for parallel FEM computations. In: Structural Engineering & Mechanics, 14 (6). 625-647 .
Jayadevan, KR and Narasimhan, R and Ramamurthy, TS and Dattaguru, B (2002) Constraint loss under dynamic loading in rate independent plastic solids. In: International Journal of Fracture, 116 (2). pp. 141-160.
Jayadevan, KR and Narasimhan, R and Ramamurthy, TS and Dattaguru, B (2002) Effect of T-stress and loading rate on crack initiation in rate sensitive plastic materials. In: International Journal of Solids and Structures, 39 (7). pp. 1757-1775.
Jayadevan, KR and Narasimhan, R and Ramamurthy, TS and Dattaguru, B (2001) A numerical study of T-stress in dynamically loaded fracture specimens. In: International Journal of Solids and Structures, 38 (28-29). pp. 4987-5005.
Singh, KL and Dattaguru, B and Ramamurthy, TS and Mangalgiri, PD (2000) Delamination tolerance studies in laminated composite panels. In: Sadhana- Academy Proceedings in Engineering Sciences, 25 (4). pp. 409-422.
Dattaguru, B (2000) A review of the numerical estimation of crack closure and fatigue crack growth. In: Creep, Fatigue and Creep-Fatigue Interaction, 20-22 Jan. 1999, Kalpakkam, India, pp. 155-164.
Singh, Ripudaman and Patel, SK and Dattaguru, B (1999) Decomposed crack closure integrals for estimation of SIF variations. In: Engineering Fracture Mechanics, 63 (2). pp. 165-178.
Venkatesha, KS and Ramamurthy, TS and Dattaguru, B (1998) A study of the behaviour of subinterface cracks in bimaterial plates. In: Engineering Fracture Mechanics, 59 (2). pp. 241-252.
Narayana, KB and Dattaguru, B and Ramamurthy, TS (1997) Fracture mechanics based design procedures for pressurized components having part-through cracks. In: Theoretical and Applied Fracture Mechanics, 27 (2). pp. 149-159.
Dattaguru, B and Seshadri, BR (1997) Two and three dimensional finite element simulation and experimental correlation of fatigue crack closure. In: Proceedings of the Indian National Science Academy, Part A, 63 (2). pp. 159-182.
Ashbaugh, NE and Dattaguru, B and Khobaib, M and Nicholas, T and Prakash, RV and Ramamurthy, TS and Seshadri, BR and Sunder, R (1997) Experimental and analytical estimates of fatigue crack closure in an aluminium-copper alloy .2. A finite element analysis. In: Fatigue and Fracture of Engineering Materials and Structures, 20 (7). pp. 963-974.
Ashbaugh, NE and Dattaguru, B and Khobaib, M and Nicholas, T and Prakash, RV and Ramamurthy, TS and Seshadri, BR and Sunder, R (1997) Experimental and analytical estimates of fatigue crack closure in an aluminium-copper alloy 1: Laser interferometry and electron fractography. In: Fatigue & Fracture Of Engineering Materials & Structures, 20 (7). pp. 951-961.
Kumar, KS and Dattaguru, B and Ramamurthy, TS and Raju, KN (1997) Fatigue crack growth studies on lug joints. In: 9th International Conference in Fracture (ICF9), Apr 01-05, 1997, Sydney, Australia.
Dattaguru, B (1996) Role of elasto-plastic analysis under cyclic loading in fatigue crack growth studies. In: Sadhana : Academy Proceedings in Engineering Sciences, 21 (part 5). pp. 577-595.
Kumar, Satish K and Dattaguru, B and Ramamurthy, TS (1996) Analysis of a cracked lug loaded by an interference fit pin. In: International Journal of Mechanical Sciences, 38 (8-9). pp. 967-979.
Narayana, Badari K and Dattaguru, B (1996) Certain Aspects Related To Computation By Modified Crack Closure Integral(MCCI). In: Engineering Fracture Machanics., 55 (02). pp. 335-339.
Venkatesha, KS and Dattaguru, B and Ramamurthy, TS (1996) Finite Element Analysis of an Interface Crack with Large Crack-Tip Contact Zones. In: Engineering Fracture Mechanics, 54 (6). pp. 847-860.
Kumar, KS and Dattaguru, B and Ramamurthy, TS and Raju, KN (1996) Elasto-plastic contact stress analysis of joints subjected to cyclic loading. In: Computers & Structures, 60 (6). pp. 1067-1077.
Venkatesha, KS and Ramamurthy, TS and Dattaguru, B (1996) Generalized Modified Crack Closure Integral (GMCCI) and its Application to Interface Crack Problems. In: Computers and Structures, 60 (4). pp. 665-676.
Dattaguru, B and Venkatesha, KS and Ramamurthy, TS and Buchholz, FG (1994) Finite Element Estimates of Strain Energy Release Rate Components at the Tip of an Interface Crack Under Mode I Loading. In: Engineering Fracture Mechanics, 49 (3). pp. 451-463.
Narayana, KB and Dayananda, TS and Dattaguru, B and Ramamurthy, TS and Vijayakumar, V (1994) Cracks emanating from pin-loaded lugs. In: Engineering fracture mechanics, 47 (1). 29-38 .
Narayanaa, KB and Dattaguru, B and Ramamurthy, TS and Vijayakumarb, K (1994) A general procedure for modified crack closure integral in 3D problems with cracks. In: Engineering Fracture Mechanics, 48 (1). 167 -176.
Narayana, KB and George, S and Dattaguru, B and Ramamurthy, TS and Vijayakumar, K (1994) Modified Crack Closure Integral (MCCI) For 3-D Problems Using 20-Noded Brick Elements. In: Fatigue and Fracture of Engineering Materials and Structures, 17 (2). pp. 145-157.
Narayana, KB and George, S and Dattaguru, B and Ramamurthy, TS and Vijayakumar, K (1994) Modified crack closure integral (MCCI) for 3-d problems using 20 noded brick elememnts. In: Fatigue and Fracture of Engineering Materials and Structures, 17 (2). pp. 145-157.
Arora, PR and Dattaguru, B and Hande, HSS (1992) A method for estimation of the radius of elastic-plastic boundary around cold-worked holes. In: Journal of Testing and Evaluation, 20 (5). pp. 369-375.
Arora, PR and Dattaguru, B and Hande, Subramanya HS (1992) The fatigue crack growth rate in L-72 Al-alloy plate specimens with cold worked holes. In: Engineering Fracture Mechanics, 42 (6). pp. 989-1000.
Naganarayana, BP and Prathap, G and Dattaguru, B and Ramamurty, TS (1992) A field-consistent and variationally correct representation of transverse shear strains in the nine-noded plate element. In: Computer Methods in Applied Mechanics and Engineering, 97 (3). pp. 355-374.
Murthy, Aruna V and Dattaguru, B and Narayana, HVL and Rao, AK (1991) Stress and strength analysis of pin joints in laminated anisotropic plates. In: Composite Structures, 19 (4). pp. 299-312.
Narayana, Badari K and Dattaguru, B and Ramamurthy, TS and Vijayakumar, K (1990) Modified Crack Closure Integral Using Six-Noded Isoparametric Quadrilateral Singular Elements. In: Engineering Fracture Mechanics, 36 (6). pp. 945-955.
Mani, V and Dattaguru, B and Balakrishnan, N and Ramamurthy, TS (1990) Parallel Gaussian Elimination for Banded Matrix - A Computational Model. In: IEEE Region 10 Conference on Computer and Communication Systems, Hong Kong, pp. 170-174.
Murthy, Aruna V and Dattaguru, B and Narayana, HVL and Rao, AK (1990) An improved iterative finite element solution for pin joints. In: Computers & Structures, 36 (6). pp. 1121-1128.
Brahma, KK and Dash, PK and Dattaguru, B (1989) Observation of crack closure using a crack mouth opening displacement gauge. In: International Journal of Fatigue, 11 (1). pp. 37-41.
Gopalan, R and Somashekar, BR and Dattaguru, B (1989) Environmental effects on fibre-Polymer composites. In: Polymer Degradation and Stability, 24 (4). pp. 361-371.
Raj, Sundar N and Dattaguru, B and Krishnamurthy, T and Ramamurthy, TS (1987) Analysis of flange joints with elastic bolt. In: Nuclear Engineering and Design, 100 (1). pp. 41-48.
Brahma, KK and Sunder, R and Dattaguru, B (1987) Automated estimation of fatigue crack length and closure/opening stress. In: International Journal of Fatigue, 91 (1). pp. 51-55.
Mangalgiri, PD and Ramamurthy, TS and Dattaguru, B and Rao, AK (1987) Elastic analysis of pin joints in plates under some combined pin and plate loads. In: International Journal of Mechanical Sciences, 29 (8). 577 -585.
Ramamurthy, TS and Krishnamurthy, T and Narayana, K Badari and Vijayakuma, K and Dattaguru, B (1986) Modified crack closure integral method with quarter point elements. In: Mechanics Research Communications, 13 (4). 179 -186.
Dattaguru, B and Naidu, ACB and Krishnamurthy, T and Ramamurthy, TS (1986) Development of special fastener elements. In: Computers & Structures, 24 (1). 127 -134.
Mangalgiri, PD and Dattaguru, B (1986) A large orthotropic plate with misfit pin under arbitrarily oriented biaxial loading. In: Composite Structures, 6 (4). 271 -281.
Mangalgiri, PD and Dattaguru, B and Rao, AK (1985) Fasteners in Composite Plates - Effects of Interfacial Friction. In: Computers & Mathematics with Applications, 11 (10). pp. 1057-1068.
Naidu, ACB and Dattaguru, B and Mangalgiri, PD and Ramamurthy, TS (1985) Analysis of a finite composite plate with smooth rigid pin. In: Composite Structures, 4 (3). pp. 197-216.
Ghosh, SP and Dattaguru, B and Rao, AK (1982) Photoelastic studies on progress of separation in interference fits. In: Experimental Mechanics, 22 (1). pp. 8-15.
Ghosh, SP and Dattaguru, B and Rao, AK (1981) Load Transfer from a Smooth Elastic Pin to a Large Sheet. In: AIAA Journal, 19 (5). pp. 619-625.
Eshwar, VA and Dattaguru, B and Rao, AK (1979) Partial loss of contact in interference fit pin joints. In: Aeronautical Journal, 83 (822). pp. 233-237.
Mangalgiri, PD and Dattaguru, B and Ramamurthy, TS (1978) Specification of skew conditions in finite element formulation. In: International Journal for Numerical Methods in Engineering, 12 (6). pp. 1037-1041.
Rao, AK and Eshwar, VA and Dattaguru, B (1978) A comprehensive study of interference and clearance fit pins in large plates. In: Mechanics Research Communications, 4 (5). pp. 325-332.
Dattaguru, B and Rao, AK (1969) Stress concentration and load diffusion in rectangular panels with constant stress flanges. In: Applied Scientific Research, 20 (1). 326-337.
