|
 | Up a level |
Biswas, Krishanu and Chattopadhyay, Kamanio (2007) Microstructural evolution during laser resolidification of Fe-25 atom percent Ge alloy. In: Symposium on Solidification Modeling and Microstructure Formation held at the 2006 TMS Annual Meeting, MAR 13-16, 2006, San Antonio.
Maity, Tarak N and Gopinath, Nagarajan K and Janardhanraj, S and Biswas, Krishanu and Basu, Bikramjit (2019) Computational and Microstructural Stability Analysis of Shock Wave Interaction with NbB2-B4C-Based Nanostructured Ceramics. In: ACS APPLIED MATERIALS & INTERFACES, 11 (50). pp. 47491-47500.
Sharma, Amit S and Yadav, Surekha and Biswas, Krishanu and Basu, Bikramjit (2018) High-entropy alloys and metallic nanocomposites: Processing challenges, microstructure development and property enhancement. In: MATERIALS SCIENCE & ENGINEERING R-REPORTS, 131 . pp. 1-42.
Yadav, Surekha and Sarkar, S and Aggarwal, Akash and Kumar, Arvind and Biswas, Krishanu (2018) Wear and mechanical properties of novel (CuCrFeTiZn)(100-x)Pb-x high entropy alloy composite via mechanical alloying and spark plasma sintering. In: WEAR, 410 . pp. 93-109.
Maity, T N and Biswas, Krishanu and Basu, Bikramjit (2018) Critical role of ZrO2 on densification and microstructure development in spark plasma sintered NbB2. In: ACTA MATERIALIA, 152 . pp. 215-228.
Sonkusare, Reshma and Janani, P Divya and Gurao, N P and Sarkar, S and Sen, S and Pradeep, K G and Biswas, Krishanu (2018) Phase equilibria in equiatomic CoCuFeMnNi high entropy alloy. In: MATERIALS CHEMISTRY AND PHYSICS, 210 (SI). pp. 269-278.
Mohanty, S and Gurao, N P and Padaikathan, P and Biswas, Krishanu (2017) Ageing behaviour of equiatomic consolidated Al20Co20Cu20Ni20Zn20 high entropy alloy. In: MATERIALS CHARACTERIZATION, 129 . pp. 127-134.
Tiwary, Chandra Sekhar and Bhowmick, Somnath and Prakash, Abhinav and Chakrabarti, Ramananda and Biswas, Krishanu and Chattopadhyay, Kamanio (2017) Ferromagnetism in alpha-Mn nanorods. In: JOURNAL OF APPLIED PHYSICS, 121 (8).
Mohanty, S and Maity, TN and Mukhopadhyay, S and Sarkar, S and Gurao, NP and Bhowmick, S and Biswas, Krishanu (2017) Powder metallurgical processing of equiatomic AlCoCrFeNi high entropy alloy: Microstructure and mechanical properties. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 679 . pp. 299-313.
Kumar, Alok and Biswas, Krishanu and Basu, Bikramjit (2015) Hydroxyapatite-titanium bulk composites for bone tissue engineering applications. In: JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A, 103 (2). pp. 791-806.
Sharma, Amit Siddharth and Biswas, Krishanu and Basu, Bikramjit (2014) Microstructure-Wear Resistance Correlation and Wear Mechanisms of Spark Plasma Sintered Cu-Pb Nanocomposites. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 45A (1). pp. 482-500.
Sharma, Amit Siddharth and Biswas, Krishanu and Basu, Bikramjit (2014) Microstructure-hardness-fretting wear resistance correlation in ultrafine grained Cu-TiB2-Pb composites. In: WEAR, 319 (1-2). pp. 160-171.
Kumar, Alok and Webster, Thomas J and Biswas, Krishanu and Basu, Bikramjit (2013) Flow cytometry analysis of human fetal osteoblast fate processes on spark plasma sintered hydroxyapatite-titanium biocomposites. In: Journal of Biomedical Materials Research Part A, 101 (10). pp. 2925-2938.
Sharma, Amit S and Mishra, Nisha and Biswas, Krishanu and Basu, Bikramjit (2013) Densification kinetics, phase assemblage and hardness of spark plasma sintered Cu-10 wt% TiB2 and Cu-10 wt% TiB2-10 wt% Pb composites. In: Journal of Materials Research, 28 (11). pp. 1517-1528.
Sharma, Amit S and Biswas, Krishanu and Basu, Bikramjit (2013) Fine scale characterization of surface/subsurface and nanosized debris particles on worn Cu-10 % Pb nanocomposites. In: Journal of Nanoparticle Research, 15 (5). 1675_1-1675_12.
Kumar, Alok and Biswas, Krishanu and Basu, Bikramjit (2013) Fretting wear behaviour of hydroxyapatite-titanium composites in simulated body fluid, supplemented with 5 g l(-1) bovine serum albumin. In: JOURNAL OF PHYSICS D-APPLIED PHYSICS, 46 (40).
Sharma, Amit S and Mishra, Nisha and Biswas, Krishanu and Basu, Bikramjit (2013) Fretting wear study of Cu-10 wt% TiB2 and Cu-10 wt% TiB2-10 wt% Pb composites. In: WEAR, 306 (1-2). pp. 138-148.
Kumar, Alok and Dhara, Sharmistha and Biswas, Krishanu and Basu, Bikramjit (2013) In vitro bioactivity and cytocompatibility properties of spark plasma sintered HA-Ti composites. In: JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 101B (2). pp. 223-236.
Khan, Patan Yousaf and Bhattacharya, Victoria and Biswas, Krishanu and Chattopadhyay, Kamanio (2013) Melting and solidification behavior of Pb-Sn embedded alloy nano-particles. In: JOURNAL OF NANOPARTICLE RESEARCH, 15 (11).
Biswas, Krishanu and Sharma, Amit S and Basu, Bikramjit (2013) On the densification mechanisms and properties of Cu-Pb and Cu-Pb-TiB2 nanocomposites densified using spark plasma sintering. In: SCRIPTA MATERIALIA, 69 (2). pp. 122-126.
Kumar, Alok and Biswas, Krishanu and Basu, Bikramjit (2013) On the toughness enhancement in hydroxyapatite-based composites. In: ACTA MATERIALIA, 61 (14). pp. 5198-5215.
Tiwary, Chandra Sekhar and Verma, Akash and Kashyp, Sanjay and Biswas, Krishanu and Chattopadhyay, Kamanio (2013) Preparation of Freestanding Zn Nanocrystallites by Combined Milling at Cryogenic and Room Temperatures. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 44A (4). pp. 1917-1924.
Tiwary, Chandra Sekhar and Verma, Akash and Kashyp, Sanjay and Biswas, Krishanu and Chattopadhyay, Kamanio (2013) Preparation of Freestanding Zn Nanocrystallites by Combined Milling at Cryogenic and Room Temperatures. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 44A (4). pp. 1917-1924.
Kumar, Alok and Mallik, Awadesh Kumar and Acikbas, Nurcan Calis and Yaygingol, Merve and Kara, Ferhat and Mandal, Hasan and Basu, Debabrata and Biswas, Krishanu and Basu, Bikramjit (2012) Cytocompatibility property evaluation of gas pressure sintered SiAlON-SiC composites with L929 fibroblast cells and Saos-2 osteoblast-like cells. In: Materials Science and Engineering: C, 32 (3). pp. 464-469.
Tiwary, CS and Verma, Akash and Biswas, Krishanu and Mondal, Amit K and Chattopadhyay, Kamanio (2011) Preparation of ultrafine CsCl crystallites by combined cryogenic and room temperature ball milling. In: Ceramics International, 37 (8). pp. 3677-3686.
Verma, Akash and Biswas, Krishanu and Tiwary, Chandra Sekhar and Mondal, Amit Kumar and Chattopadhyay, Kamanio (2011) Combined Cryo and Room-Temperature Ball Milling to Produce Ultrafine Halide Crystallites. In: Metallurgical and Materials Transactions A, 42A (4). pp. 1127-1137.
Biswas, Krishanu and Chattopadhyay, K (2010) Microstructural Evolution during Laser Resolidification of Fe-18 At. Pct Ge Alloy. In: Mallurgical materials Transactions A, 41A (3). pp. 574-582.
Sharma, Prithu and Biswas, Krishanu and Mondal, Amit Kumar and Chattopadhyay, Kamanio (2009) Size effect on the lattice parameter of KCl during mechanical milling. In: Scripta Materialia, 61 (6). pp. 600-603.
Biswas, Krishanu and Mukhopadhyay, Amartya and Basu, Bikramjit and Chattopadhyay, Kamanio (2007) Densification and microstructure development in spark plasma sintered WC–6 wt% ZrO2 nanocomposites. In: Journal of Materials Research, 22 (6). pp. 1491-1501.
Biswas, Krishanu and Mukhopadhyay, Amartya and Basu, Bikramjit and Chattopadhyay, Kamanio (2007) Densification and microstructure development in spark plasma sintered WC–6 wt% $ZrO_2$ nanocomposites. In: Journal of Materials Research, 22 (6). pp. 1491-1501.
Biswas, Krishanu and Phanikumar, Gandham and Herlach, Dieter M and Chattopadhyay, Kamanio (2007) Non-equilibrium solidification of concentrated Fe–Ge alloys. In: Materials Science and Engineering A, 449-45 . pp. 12-17.
Gayen, Arup and Baidya, Tinku and Biswas, Krishanu and Roy, Sounak and Hegde, MS (2006) Synthesis, structure and three way catalytic activity of $Ce_{1-x}Pt_{x/2}Rh_{x/2}O_{2-\delta}$ (x = 0.01 and 0.02) nano-crystallites: Synergistic effect in bimetal ionic catalysts. In: Applied Catalysis A: General, 315 . pp. 135-146.
Biswas, Krishanu and Basu, B and Suri, AK and Chattopadhyay, K (2006) A TEM study on TiB2-20%MoSi2 composite: Microstructure development and densification mechanism. In: Scripta Materialia, 54 (7). pp. 1363-1368.
Biswas, Krishanu and Das, Puspendu Kumar and Chattopadhyay, Kamanio (2006) Microstructural evolution in laser-ablation-deposited Fe–25 at.% Ge thin film. In: Journal of Materials Research, 21 (1). pp. 174-184.
Biswas, Krishanu and Das, Puspendu Kumar and Chattopadhyay, Kamanio (2006) Microstructural evolution in laser-ablation-deposited Fe-25 at.% Ge thin film. In: Journal of Materials Research, 219 (1). pp. 174-184.
Phanikumar, Gandham and Biswas, Krishanu and Funke, Oliver and Holland-Moritz, Dirk and Herlach, Dieter M and Chattopadhyay, Kamanio (2005) Solidification of undercooled peritectic Fe-Ge alloy. In: Acta Materialia, 53 (13). pp. 3591-3600.
Biswas, Krishanu and Galun, Rolf and Mordike, Barry L and Chattopadhyay, Kamanio (2005) Laser Cladding of Quasi-Crystal-Forming Al-Cu-Fe-Bi on an Al-Si Alloy Substrate. In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 36A (7). pp. 1947-1964.
Biswas, Krishanu and Galun, Rolf and Mordike, Barry L and Chattopadhyay, Kamanio (2004) Laser cladding of quasicrystal forming Al–Cu–Fe on aluminum. In: Journal of Non-Crystalline Solids, 334-33 . pp. 517-523.
Biswas, Krishanu and Chattopadhyay, Kamanio and Galun, Rolf and Mordike, Barry L (2003) The ω Phase Formation during Laser Cladding and Remelting of Quasicrystal Forming AlCuFe on Pure Aluminum. In: MRS Proceedings, 805 .
