|
 | Up a level |
Kumar, S and Divakaran, A and Kailas, SV (2023) Fabrication and tribo characteristics of in-situ polymer-derived nano-ceramic composites of Al-Mg-Si alloy. In: Tribology International, 180 .
Likhar, PV and Divakaran, A and Kailas, SV (2022) An energy dissipation tribometer to evaluate friction in boundary lubrication regime. In: Tribology International, 171 .
Edachery, V and Swamybabu, V and Adarsh, D and Kailas, SV (2022) Influence of surface roughness frequencies and roughness parameters on lubricant wettability transitions in micro-nano scale hierarchical surfaces. In: Tribology International, 165 .
Edachery, V and Shashank, R and Kailas, SV (2021) Influence of surface texture directionality and roughness on wettability, sliding angle, contact angle hysteresis, and lubricant entrapment capability. In: Tribology International, 158 .
Anantheshwara, K and Bobji, MS (2010) In situ transmission electron microscope study of single asperity sliding contacts. In: Tribology International, 43 (5-6, S). pp. 1099-1103.
Menezes, Pradeep L and Kishore, * and Kailas, SatishV and Bobjib, MS (2010) Influence of tilt angle of plate on friction and transfer layer—A study of aluminium pin sliding against steel plate. In: Tribology International, 43 (5-6). 897 -905.
Mahato, Anirban and Xia, Shuman and Perry, Tom and Sachdev, Anil and Biswas, SK (2010) Role of silicon in resisting subsurface plastic deformation in tribology of aluminium-silicon alloys. In: Tribology International, 43 (1-2). pp. 381-387.
Pottirayil, Anirudhan and Menezes, Pradeep L and Kailas, Satish V (2010) A parameter characterizing plowing nature of surfaces close to Gaussian. In: Tribology International, 43 (1-2). pp. 370-380.
Uyyuru, RK and Surappa, MK and Brusethaug, S (2007) Tribological behavior of $Al-Si/SiC_p$ composites/automobile brake pad system under dry sliding conditions. In: Tribology International, 40 (2). pp. 365-373.
Mondal, Ashok Kumar and Rao, Chandra BSS and Kumar, Subodh (2007) Wear behaviour of AE42+20% saffil Mg-MMC. In: Tribology International, 40 (2). pp. 290-296.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Studies on friction and transfer layer using inclined scratch. In: Tribology International, 39 (2). pp. 175-183.
Devaprakasam, D and Khatri, OP and Shankar, N and Biswas, SK (2005) Boundary lubrication additives for aluminium: A journey from nano to macrotribology. In: Tribology International, 38 (11-12). pp. 1022-1034.
Venkatesh, K and Bobji, MS and Biswas, SK (1998) Roughness due to workpiece wear generated in surface grinding of metals. In: Tribology International, 31 (12). pp. 771-778.
Briscoe, BJ and Evans, PD and Biswas, SK and Sinha, SK (1996) The hardnesses of poly(methylmethacrylate). In: Tribology International, 29 (2). pp. 93-104.
Bai, Pramila BN and Haresh, K and Biswas, SK and Bhave, SK (1993) Evolution of and preconditions for generation of corrugations on a plane surface in rolling contact. In: Tribology International, 26 (3). pp. 175-182.
Briscoe, BJ and Biswas, SK and Sinha, SK and Panesar, SS (1993) The scratch hardness and friction of a soft rigid-plastic solid. In: Tribology International, 26 (3). pp. 183-193.
Biswas, S and Bose, SC and Bhave, SK and Bai, Pramila BN and Biswas, SK (1992) Study of corrugations in motor bearings. In: Tribology International, 25 (1). pp. 27-36.
Kumar, Udaya K and Gundappa, Pradeep and Bai, Pramila BN and Natarajan, KA and Biswas, SK (1989) Laboratory studies on the wear of grinding media. In: Tribology International, 22 (3). pp. 219-225.
Krishnan, BP and Raman, N and Narayanaswamy, K and Rohatgi, PK (1981) Mechanism of improvement in oil spreadability of aluminium alloy-graphite particle composites. In: Tribology International, 14 (5). pp. 301-305.
Biswasa, SK and Shantharam, A and Rao, NAP and Swamy, K Narayana and Rohatgi, PK and Biswas, SK (1980) Performance of graphic aluminium particulate composite materials. In: Tribology International, 13 (4). pp. 171-176.
