|
 | Up a level |
Rastogi, A and Kalyan, D and Makineni, SK and Neelakantan, S (2024) Elucidating the role of stress-induced martensite on the tensile behaviour of metastable β Ti-10V-2Fe-3Al alloy. In: Materials Characterization, 207 .
Lala, SRF and Singh, AP and Gireesh, KV and Srivastava, C (2024) Chromium partitioning induced evolution of texture, grain boundary constitution, and corrosion behavior of CusbndCr coatings electrodeposited at different temperatures. In: Materials Characterization, 210 .
Bansal, U and Thakur, AK and Baheti, VA and Singh, SB and Mondal, A and Halder, AK and Chakraborty, A and Chattopadhyay, K and Paul, A (2023) Diffusion-controlled growth mechanism of phases and the microstructural evolution in the Ni-Zn system. In: Materials Characterization, 202 .
Ramkumar, KR and Menghani, J and Jha, VK and Vikram, RJ and Sivasankaran, S and Kim, HS (2022) Investigations on work hardening behaviour and relative slip distance in GTA welded AA 6063 plates using AA 5356-TiB2 filler rod. In: Materials Characterization, 194 .
Jalali, SIA and Sen, M and Banerjee, D (2022) Strain mapping in fine scale multivariant α structures in titanium alloys. In: Materials Characterization, 193 .
Singh, SP and Rijal, A and Straub, T and Han, J-K and Kennerknecht, T and Eberl, C and Kawasaki, M and Kumar, P (2022) Effect of high-pressure torsion on high cycle fatigue of commercially pure Cu: Some insights from formation of surface micro-cracks. In: Materials Characterization, 190 .
Pariyar, A and Perugu, CS and Dash, K and Kailas, SV (2021) Microstructure and mechanical behavior of high toughness Al-based metal matrix composite reinforced with in-situ formed nickel aluminides. In: Materials Characterization, 171 .
Kar, A and Yadav, D and Suwas, S and Kailas, SV (2020) Role of plastic deformation mechanisms during the microstructural evolution and intermetallics formation in dissimilar friction stir weld. In: Materials Characterization, 164 .
Sarkar, Apu and Roy, Shibayan and Suwas, Satyarn (2011) X-ray diffraction line profile analysis of deformation microstructure in boron modified Ti-6Al-4V alloy. In: Materials Characterization, 62 (1). pp. 35-42.
Ray, Ashok Kumar and Goswami, Bangsidhar and Singh, Mahendra Prasad and Das, Deepak Kumar and Roy, Nilima and Dash, Byomkesh and Kumar, Ravi B and Ray, Ajoy Kumar and Das, Gautam and Rupa, Karuna Purnapu P and Parida, Narayan and Das, Arpan and Swaminathan, Jagannathan and Dwarakadasa, Eshwarahalli (2006) Characterization of bond coat in a thermal barrier coated superalloy used in combustor liners of aero engines. In: Materials Characterization, 57 (3). pp. 137-210.
Gupta, Nikhil and Karthikeyan, CS and Sankaran, S and Kishore, * (1999) Correlation of Processing Methodology to the Physical and Mechanical Properties of Syntactic Foams With and Without Fibers. In: Materials Characterization, 43 (4). pp. 271-277.
Murali, S and Ramachandra, M and Murthy, KSS and Raman, KS (1997) Electropolishing of Al-7Si-0.3Mg Cast Alloy by Using Perchloric and Nitric Acid Electrolytes. In: Materials Characterization, 38 (4-5). pp. 273-286.
Murali, S and Raman, KS and Murthy, KSS (1994) Morphological studies on $\beta-FeSiAI_5$ phase in AI-7Si-0.3Mg alloy with trace sdditions of Be, Mn, Cr, and Co. In: Materials Characterization, 33 (2). pp. 99-112.
