![]() | Up a level |
Rekha, M Y and Srivastava, Chandan (2019) Microstructural Evolution and Corrosion Behavior of ZnNi-Graphene Oxide Composite Coatings. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 50 (12). pp. 5896-5913.
Kar, Amlan and Suwas, Satyam and Kailas, Satish V (2019) Multi-Length Scale Characterization of Microstructure Evolution and Its Consequence on Mechanical Properties in Dissimilar Friction Stir Welding of Titanium to Aluminum. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 50A (11). pp. 5153-5173.
Kalsar, Rajib and Khandal, Priyanka and Suwas, Satyam (2019) Effects of Stacking Fault Energy on Deformation Mechanisms in Al-Added Medium Mn TWIP Steel. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 50A (8). pp. 3683-3696.
Singh, Shobhit P and Sonawane, Dipali and Kumar, Praveen (2019) Creep of Cu-Bi Alloys with High Bi Content Near and Above Melting Temperature of Bi. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 50A (6). pp. 2690-2701.
Cadambi, Sumanth Govindarajan and Jayaram, Vikram (2018) Effect of Humidity on Wear of TiN Coatings: Role of Capillary Condensation. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (12). pp. 6084-6092.
Bahl, S and Dryepondt, S and Allard, LF and Suwas, S and Shyam, A (2018) Retardation of Small Creep-Fatigue Crack in Gr. 91 Steel Through the Combined Effects of Stress Relaxation, Microstructural Evolution, and Oxidation. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (12). pp. 6110-6121.
Jana, Dulal Chandra and Sundararajan, G and Chattopadhyay, K (2018) Effective Activation Energy for the Solid-State Sintering of Silicon Carbide Ceramics. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (11). pp. 5599-5606.
Bhadak, Bhalchandra and Sankarasubramanian, R and Choudhury, Abhik (2018) Phase-Field Modeling of Equilibrium Precipitate Shapes Under the Influence of Coherency Stresses. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (11). pp. 5705-5726.
Nithin, B and Chattopadhyay, K and Phanikumar, G (2018) Characterization of the Hot Deformation Behavior and Microstructure Evolution of a New gamma-gamma ` Strengthened Cobalt-Based Superalloy. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (10). pp. 4895-4905.
Bawane, Kaustubh Krishna and Srinivasan, Dheepa and Banerjee, Dipankar (2018) Microstructural Evolution and Mechanical Properties of Direct Metal Laser-Sintered (DMLS) CoCrMo After Heat Treatment. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (9, SI). pp. 3793-3811.
Pal, Soupitak and Sarkar, Rohit and Jayaram, Vikram (2018) Characterization of Thermal Stability and High-Temperature Tribological Behavior of Electroless Ni-B Coating. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (8). pp. 3217-3236.
Kumar, Amit and Khatirkar, Rajesh Kisni and Gupta, Aman and Shekhawat, Satish K and Suwas, Satyam (2018) Deciphering the Possible Role of Strain Path on the Evolution of Microstructure, Texture, and Magnetic Properties in a Fe-Cr-Ni Alloy. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (8). pp. 3402-3418.
Mishra, Sumeet and Beura, Vikrant Kumar and Singh, Amit and Yadava, Manasij and Nayan, Niraj (2018) Effect of Temper Condition on Stress Relaxation Behavior of an Aluminum Copper Lithium Alloy. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (7). pp. 2631-2643.
Mondol, S and Makineni, S K and Kumar, S and Chattopadhyay, K (2018) Enhancement of High Temperature Strength of 2219 Alloys Through Small Additions of Nb and Zr and a Novel Heat Treatment. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (7). pp. 3047-3057.
Solanki, Vanaraj and Joshi, Shalik Ram and Mishra, Indrani and Kanjilal, D and Varma, Shikha (2018) Formation of Anisotropic Nanostructures on Rutile TiO2(110) Surfaces and Their Photo-Absorption Properties. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (7). pp. 3117-3121.
Sivaprahasam, D and Sriramamurthy, A M and Bysakh, S and Sundararajan, G and Chattopadhyay, K (2018) Role of Cu During Sintering of Fe0.96Cu0.04 Nanoparticles. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (4). pp. 1410-1424.
Nayan, Niraj and Singh, Gaurav and Prabhu, T Antony and Murty, S V S Narayana and Ramamurty, U (2018) Cryogenic Mechanical Properties of Warm Multi-Pass Caliber-Rolled Fine-Grained Titanium Alloys: Ti-6Al-4V (Normal and ELI Grades) and VT14. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (1). pp. 128-146.
Pandey, P and Kashyap, S and Tiwary, C S and Chattopadhyay, K (2017) Development of High-Strength High-Temperature Cast Al-Ni-Cr Alloys Through Evolution of a Novel Composite Eutectic Structure. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (12). pp. 5940-5950.
Bankoti, AKS and Mondal, AK and Perugu, Chandra S and Ray, BC and Kumar, S (2017) Correlation of Microstructure and Electrochemical Corrosion Behavior of Squeeze-Cast Ca and Sb Added AZ91 Mg Alloys. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (10). pp. 5106-5121.
Pandey, P and Kashyap, S and Tiwary, CS and Chattopadhyay, K (2017) Development of High-Strength High-Temperature Cast Al-Ni-Cr Alloys Through Evolution of a Novel Composite Eutectic Structure. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (12). pp. 5940-5950.
Bajargan, Govind and Singh, Gaurav and Ramamurty, U (2017) Effect of Li Addition on the Optimum Thermo-Mechanical Processing Parameters of the Mg Alloy AZ31. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (9). pp. 4262-4274.
Gurao, N P and Suwas, Satyam (2017) Effect of Phase Contiguity and Morphology on the Evolution of Deformation Texture in Two-Phase Alloys. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (2). pp. 809-827.
Kadambi, Sourabh B and Divya, VD and Ramamurty, U (2017) Evaluation of Solid-Solution Hardening in Several Binary Alloy Systems Using Diffusion Couples Combined with Nanoindentation. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (10). pp. 4574-4582.
Patra, Sudipta and Ghosh, Abhijit and Singhal, Lokesh Kumar and Podder, Arijit Saha and Sood, Jagmohan and Kumar, Vinod and Chakrabarti, Debalay (2017) Hot Deformation Behavior of As-Cast 2101 Grade Lean Duplex Stainless Steel and the Associated Changes in Microstructure and Crystallographic Texture. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (1). pp. 294-313.
Kumar, Amit and Khatirkar, Rajesh Kisni and Chalapathi, Darshan and Kumar, Gulshan and Suwas, Satyam (2017) Microstructure and Texture Development during Cold Rolling in UNS S32205 and UNS S32760 Duplex Stainless Steels. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (5). pp. 2349-2362.
Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2017) Microstructure and Texture Evolution during Single- and Multiple-Pass Friction Stir Processing of Heat-Treatable Aluminum Alloy 2024. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (9). pp. 4247-4261.
Lahiri, Arka and Abinandanan, TA and Choudhury, Abhik (2017) Theoretical and Numerical Study of Growth in Multi-Component Alloys. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (10). pp. 4463-4476.
Suresh, KS and Rollett, AD and Suwas, Satyam (2016) Evolution of Texture and Microstructure in Deformed and Annealed Copper-Iron Multilayer. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 47A (2). pp. 852-868.
Das, Prosenjit and Samanta, Sudip K and Bera, Supriya and Dutta, Pradip (2016) Microstructure Evolution and Rheological Behavior of Cooling Slope Processed Al-Si-Cu-Fe Alloy Slurry. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 47A (5). pp. 2243-2256.
Chatterjee, Subhradeep and Abinandanan, TA and Reddy, Madhusudhan G and Chattopadhyay, Kamanio (2016) Microstructure Formation in Dissimilar Metal Welds: Electron Beam Welding of Ti/Ni. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 47A (2). pp. 769-776.
Babu, Arvindha D and Majumdar, Bhaskar and Sarkar, Rajdeep and Murty, BS and Chattopadhyay, K (2016) On the Structural Stability of Melt Spun Ribbons of Fe95-x Zr (x) B4Cu1 (x=7 and 9) Alloys and Correlation with Their Magnetic Properties. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 47A (1). pp. 560-571.
Palit, Mithun and Banumathy, S and Singh, AK and Pandian, S and Chattopadhyay, Kamanio (2016) Orientation Selection and Microstructural Evolution in Directionally Solidified Tb0.3Dy0.7Fe1.95. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 47A (4). pp. 1729-1739.
Palanisamy, Dhanalakshmi and Singh, Shailesh and Srivastava, Chandan and Madras, Giridhar and Chattopadhyay, Kamanio (2016) Predicting Pathways for Synthesis of Ferromagnetic tau Phase in Binary Heusler Alloy Al-55 pct Mn Through Understanding of the Kinetics of epsilon-tau Transformation. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 47A (12). pp. 6555-6568.
Priydarshini, Geetha B and Esakkiraja, N and Aich, Shampa and Chakraborty, M (2016) Resputtering Effect on Nanocrystalline Ni-Ti Alloy Films. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 47A (4). pp. 1751-1760.
Nayan, Niraj and Singh, Gaurav and Murty, Narayana SVS and Jha, Abhay K and Pant, Bhanu and George, Koshy M (2015) High-Temperature Deformation Processing Map Approach for Obtaining the Desired Microstructure in a Multi-component (Ni-Ti-Cu-Fe) Alloy. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A (5). pp. 2201-2215.
Singh, Shailesh Kumar and Chattopadhyay, K and Dutta, Pradip (2015) High-Temperature Workability of Thixocast A356 Aluminum Alloy. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A (7). pp. 3248-3259.
Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2015) Restoration Mechanisms During the Friction Stir Processing of Aluminum Alloys. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A (7). pp. 2823-2828.
Santra, Sangeeta and Paul, Aloke (2015) Role of the Molar Volume on Estimated Diffusion Coefficients. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A (9). pp. 3887-3899.
Ghosh, Pradipta and Chokshi, Atul H (2015) Size Effects on Strength in the Transition from Single-to-Polycrystalline Behavior. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A (12). pp. 5671-5684.
Madhavan, R and Nagaraju, S and Suwas, Satyam (2015) Texture Evolution in Nanocrystalline Nickel: Critical Role of Strain Path. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A (2). pp. 915-925.
Biswas, Somjeet and Singh, Satyaveer D and Beausir, Benoit and Toth, Laszlo S and Suwas, Satyam (2015) Thermal Response on the Microstructure and Texture of ECAP and Cold-Rolled Pure Magnesium. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A (6). pp. 2598-2613.
Korla, Rajesh and Chokshi, Atul H (2014) A Constitutive Equation for Grain Boundary Sliding: An Experimental Approach. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 45A (2). pp. 698-708.
Gupta, Neha and Parameswaran, Venkitanarayanan and Basu, Bikramjit (2014) Microstructure Development, Nanomechanical, and Dynamic Compression Properties of Spark Plasma Sintered TiB2-Ti-Based Homogeneous and Bi-layered Composites. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 45A (10). pp. 4646-4664.
Sharma, Amit Siddharth and Biswas, Krishanu and Basu, Bikramjit (2014) Microstructure-Wear Resistance Correlation and Wear Mechanisms of Spark Plasma Sintered Cu-Pb Nanocomposites. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 45A (1). pp. 482-500.
Sudarshan, S and Terauds, Kalvis and Anilchandra, AR and Raj, Rishi (2014) Polymer-Derived In-Situ Metal Matrix Composites Created by Direct Injection of a Liquid Polymer into Molten Magnesium. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 45A (2). pp. 551-554.
Chithra, S and Malviya, KD and Chattopadhyay, K (2014) Structural Evolution and Phase Stability of Hume-Rothery Phase in a Mechanically Driven Nanostructured Ag-15 at. pct Sn Alloy. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 45A (3). pp. 1148-1160.
Paul, Aloke (2013) Discussion of ``The Development of the Concept of Vacancy-Mediated Substitutional Diffusion: The Important Contribution from Fredrick Seitz''. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 44A (13). pp. 5622-5624.
Gurao, NP and Manivasagam, Geetha and Govindaraj, P and Asokamani, R and Suwas, Satyam (2013) Effect of Texture and Grain Size on Bio-Corrosion Response of Ultrafine-Grained Titanium. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 44A (12). pp. 5602-5610.
Gurao, NP and Sethuraman, S and Suwas, Satyam (2013) Evolution of Texture and Microstructure in Commercially Pure Titanium with Change in Strain Path During Rolling. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 44A (3). pp. 1497-1507.
Joseph, Sudha and Tewari, Asim and Kumar, S (2013) The Fracture Characteristics of a Near Eutectic Al-Si Based Alloy Under Compression. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 44A (5). pp. 2358-2368.
Tiwary, Chandra Sekhar and Verma, Akash and Kashyp, Sanjay and Biswas, Krishanu and Chattopadhyay, Kamanio (2013) Preparation of Freestanding Zn Nanocrystallites by Combined Milling at Cryogenic and Room Temperatures. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 44A (4). pp. 1917-1924.
Tiwary, Chandra Sekhar and Verma, Akash and Kashyp, Sanjay and Biswas, Krishanu and Chattopadhyay, Kamanio (2013) Preparation of Freestanding Zn Nanocrystallites by Combined Milling at Cryogenic and Room Temperatures. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 44A (4). pp. 1917-1924.
Divya, VD and Ramamurty, U and Paul, A (2011) Interdiffusion and Growth of the Phases in CoNi/Mo and CoNi/W Systems. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 43A (5). pp. 1564-1577.