Up a level |
Mahadule, D and Kumar, D and Dandekar, TR and Khatirkar, RK and Suwas, S (2023) Modelling of flow stresses during hot deformation of Ti–6Al–4Mo–1V–0.1Si alloy. In: Journal of Materials Research .
Jalali, SIA and Bhowmick, S and Jayaram, V and Kumar, P (2023) Sample size effect on creep in bending: An interplay between strain gradient and surface proximity effects. In: Journal of Materials Research, 38 (12). pp. 3059-3077.
Deb, D and Sai Gautam, G (2022) Critical overview of polyanionic frameworks as positive electrodes for Na-ion batteries. In: Journal of Materials Research .
Singh, Neera and Edachery, Vimal and Rajput, Monika and Chatterjee, Kaushik and Kailas, Satish V and Prashanth, KG (2022) Ti6Al7Nb–TiB nanocomposites for ortho-implant applications. In: Journal of Materials Research . ISSN 0884-2914
Acharya, S and Soni, R and Suwas, S and Chatterjee, K (2021) Additive manufacturing of Co�Cr alloys for biomedical applications: A concise review. In: Journal of Materials Research .
Bibhanshu, N and Shankar, G and Suwas, S (2021) Hot deformation and softening response in boronmodified two�phase titanium aluminide Ti�48Al�2V�0.2B. In: Journal of Materials Research .
Singh, N and Acharya, S and Prashanth, KG and Chatterjee, K and Suwas, S (2021) Ti6Al7Nb-based TiB-reinforced composites by selective laser melting. In: Journal of Materials Research .
Chowdhury, SR and Keshavan, N and Basu, B (2021) Urinary bladder and urethral tissue engineering, and 3D bioprinting approaches for urological reconstruction. In: Journal of Materials Research .
Aashranth, B and Shankar, G and Davinci, MA and Samantaray, D and Borah, U and Suwas, S (2021) The effect of crystallographic orientation and interfaces on thermo-mechanical softening of a martensitic steel. In: Journal of Materials Research .
Bibhanshu, N and Suwas, S (2020) Mechanism of shear band formation and dynamic softening in a two-phase (α2 + γ) titanium aluminide. In: Journal of Materials Research, 35 (13). pp. 1635-1646.
Bisht, A and Kumar, S and Pang, KH and Zhou, A and Roy, A and Silberschmidt, VV and Suwas, S (2020) Shear band widening mechanism in Ti-6Al-4V under high strain rate deformation. In: Journal of Materials Research, 35 (13). pp. 1623-1634.
Veerababu, R and Balamuralikrishnan, R and Karthikeyan, S (2020) Nanoscale clusters in secondary hardening ultra-high strength steels with 1 and 3 wt Mo: An atom probe investigation. In: Journal of Materials Research, 35 (14). pp. 1763-1776.
Afzal Jalali, SI and Kumar, P and Jayaram, V (2020) High Throughput Determination of Creep Parameters Using Cantilever Bending: Part II-Primary and Steady-State through Uniaxial Equivalency. In: Journal of Materials Research, 35 (4). pp. 362-371.
Jalali, SIA and Kumar, P and Jayaram, V (2020) High Throughput Determination of Creep Parameters Using Cantilever Bending: Part i-Steady-State. In: Journal of Materials Research, 35 (4). pp. 353-361.
Bibhanshu, N and Shankar, G and Suwas, S (2020) Hot deformation and softening response in boron-modified two-phase titanium aluminide Ti�48Al�2V�0.2B. In: Journal of Materials Research .
Sharma, Amit S and Mishra, Nisha and Biswas, Krishanu and Basu, Bikramjit (2013) Densification kinetics, phase assemblage and hardness of spark plasma sintered Cu-10 wt% TiB2 and Cu-10 wt% TiB2-10 wt% Pb composites. In: Journal of Materials Research, 28 (11). pp. 1517-1528.
Bysakh, S and Kumar, A and Kamat, SV and Sharma, SK and Mohan, S (2012) Influence of annealing on oxidation, microstructure and mechanical properties of Ni-49Ti films. In: Journal of Materials Research, 27 (7). pp. 1068-1079.
Sundaram, Narayan and Guo, Yang and Murthy, Tejas G and Saldana, Chris and Chandrasekar, Srinivasan (2012) Rotation field in wedge indentation of metals. In: Journal of Materials Research, 27 (1). pp. 284-293.
Shastry, Vyasa V and Maji, Bikas and Krishnan, Madangopal and Ramamurty, Upadrasta (2011) High-temperature deformation processing maps for a NiTiCu shape memory alloy. In: Journal of Materials Research, 26 (19). pp. 2484-2492.
Divya, VD and Ramamurty, Upadrasta and Paula, Aloke (2011) Interdiffusion and the vacancy wind effect in Ni-Pt and Co-Pt systems. In: Journal of Materials Research, 26 (18). pp. 2384-2393.
Gurao, NP and Suwas, Satyam (2011) Evolution of crystallographic texture during deformation of submicron grain size titanium. In: Journal of Materials Research, 26 (4). pp. 523-532.
Bysakh, Sandip and Mitsuishi, Kazutaka and Song, Minghui and Furuya, Kazuo and Chattopadhyay, Kamanio (2011) Formation of amorphous xenon nanoclusters and microstructure evolution in pulsed laser deposited Ti(62.5)Si(37.5) thin films during Xe ion irradiation. In: Journal of Materials Research, 26 (1). pp. 62-69.
Bysakh, Sandip and Mitsuishi, Kazutaka and Song, Minghui and Furuya, Kazuo and Chattopadhyay, Kamanio (2011) Formation of amorphous xenon nanoclusters and microstructure evolution in pulsed laser deposited Ti62.5Si37.5 thin films during Xe ion irradiation. In: Journal of Materials Research, 26 . 62-69 .
Tao, M and Chokshi, AH and Conner, RD and Ravichandran, G and Johnson, WL (2010) Deformation and crystallization of Zr-based amorphous alloys in homogeneous flow regime. In: Journal of Materials Research, 25 (6). pp. 1137-1148.
Dubach, Alban and Prasad, K Eswar and Raghavan, Rejin and Loeffler, Joerg F (2009) Free-volume dependent pressure sensitivity of Zr-based bulk metallic glass. In: Journal of Materials Research, 24 (8). pp. 2697-2704.
Park, Jin Man and Mattern, Norbert and Kuehn, Uta and Eckert, Juergen and Kim, Ki Buem and Kim, Won Tae and Chattopadhyay, Kamanio and Kim, Do Hyang (2009) High-strength bulk Al-based bimodal ultrafine eutectic composite with enhanced plasticity. In: Journal of Materials Research, 24 (8). 2605 -2609.
Boopathy, Kombaiah and Hofmann, Douglas C and Johnson, William L and Ramamurty, Upadrasta (2009) Near-threshold fatigue crack growth in bulk metallic glass composites. In: Journal of Materials Research, 24 (12). pp. 3611-3619.
Biswas, Krishanu and Mukhopadhyay, Amartya and Basu, Bikramjit and Chattopadhyay, Kamanio (2007) Densification and microstructure development in spark plasma sintered WC–6 wt% ZrO2 nanocomposites. In: Journal of Materials Research, 22 (6). pp. 1491-1501.
Biswas, Krishanu and Mukhopadhyay, Amartya and Basu, Bikramjit and Chattopadhyay, Kamanio (2007) Densification and microstructure development in spark plasma sintered WC–6 wt% $ZrO_2$ nanocomposites. In: Journal of Materials Research, 22 (6). pp. 1491-1501.
Jacob, KT and Saji, VS and Waseda, Y (2007) Standard Gibbs energy of formation of $Pb_2Ru_2O_{6.5}$. In: Journal of Materials Research, 22 (5). pp. 1174-1181.
Bhowmick, R and Bysakh, S and Kawamura, Y and Yamasaki, M and Ramamurty, U and Chattopadhyay, K (2007) Microstructure and mechanical properties of electron beam weld joints of a $Zr_{41}Ti_{14}Cu_{12}Ni_{10}Be_{23}$ bulk metallic glass with Zr. In: Journal of Materials Research, 22 (2). pp. 437-444.
Jin, HW and Ayer, R and Koo, JY (2007) Reciprocating wear mechanisms in a Zr-based bulk metallic glass. In: Journal of Materials Research, 22 (2). pp. 264-273.
Bhowmick, R and Bysakh, S and Kawamura, Y and Yamasaki, M and Ramamurty, U and Chattopadhyay, K (2007) Microstructure and mechanical properties of electron beam weld joints of a Zr41Ti14Cu12Ni10Be23 bulk metallic glass with Zr. In: Journal of Materials Research, 22 (2).
Jacob, KT and Saji, VS and Waseda, Y (2007) Standard Gibbs energy of formation of Pb2Ru2O6.5. In: Journal of Materials Research, 22 (5).
Math, Souvik and Jayaram, V and Biswas, SK (2006) Deformation and failure of a film/substrate system subjected to spherical indentation: Part 1. Experimental validation of stresses and strains derived using Hankel transform technique in an elastic film/substrate system. In: Journal of Materials Research, 21 (3). pp. 774-782.
Math, S and Jayaram, V and Biswas, SK (2006) Deformation and failure of a film/substrate system subjected to spherical indentation: Part II. Prediction of failure modes in a thin TiN film deposited on a compliant elastic substrate. In: Journal of Materials Research, 21 (3). pp. 783-790.
Biswas, Krishanu and Das, Puspendu Kumar and Chattopadhyay, Kamanio (2006) Microstructural evolution in laser-ablation-deposited Fe–25 at.% Ge thin film. In: Journal of Materials Research, 21 (1). pp. 174-184.
Shankar, KS and Raychaudhuri, AK (2006) Low-temperature polymer precursor-based synthesis of nanocrystalline particles of lanthanum calcium manganese oxide (La0.67Ca0.33MnO3) with enhanced ferromagnetic transition temperature. In: Journal of Materials Research, 21 (1). pp. 27-33.
Shankar, Shantha K and Raychaudhuri, AK (2006) Low-temperature polymer precursor-based synthesis of nanocrystalline particles of lanthanum calcium manganese oxide $(La_{0.67}Ca_{0.33}MnO_{3})$ with enhanced ferromagnetic transition temperature. In: Journal of Materials Research, 21 (1). pp. 27-33.
Biswas, Krishanu and Das, Puspendu Kumar and Chattopadhyay, Kamanio (2006) Microstructural evolution in laser-ablation-deposited Fe-25 at.% Ge thin film. In: Journal of Materials Research, 219 (1). pp. 174-184.
Kim, Young Gi and Thompson, Barry C and Ananthakrishnan, Nisha and Padmanaban, G and Ramakrishnan, S and Reynolds, John R (2005) Variable band gap conjugated polymers for optoelectronic and redox applications. In: Journal of Materials Research, 20 (12). pp. 3188-3198.
Bobji, MS and Pethica, JB and Inkson, BJ (2005) Indentation mechanics of Cu-Be quantified by an in situ transmission electron microscopy mechanical probe. In: Journal of Materials Research, 20 (10). pp. 2726-2732.
Pramanick, Abhijit and Chatterjee, Subhradeep and Bhattacharya, Victoria and Chattopadhyay, Kamanio (2005) Synthesis and Microstructure of Laser Surface Alloyed Al–Sn–Si Layer on Commercial Aluminum Substrate. In: Journal of Materials Research, 20 (6). 1580-1589 .
Sahana, MB and Shivashankar, SA (2004) Metalorganic chemical vapor deposition of highly oriented thin film composites of V2O5 and V6O13: Suppression of the metal–semiconductor transition in V6O13. In: Journal of Materials Research, 19 (10). pp. 2859-2870.
Bysakh, S and Chattopadhyay, K and Ling, H and Wu, JD and Dong, C and Wang, YQ and Duan, XF and Kuo, KH (2004) A Study of Nanostructures of Thin Films in B–C–N System Produced by Pulsed Laser Deposition and Nitrogen Ion-Beam-Assisted Pulsed Laser Deposition. In: Journal of Materials Research, 19 (3). pp. 759-767.
Bysakh, S and Chattopadhyay, K and Ling, H and Wu, JD and Dong, C and Wang, YQ and Duan, XF and Kuo, KH (2004) The effect of boundaries on the plane Couette flow of granular materials: a bifurcation analysis. In: Journal of Materials Research, 19 (3). pp. 759-767.
Bysakh, Sandip and Das, Puspendu Kumar and Chattopadhyay, Kamanio (2003) Evolution of metastable phases during crystallization of pulsed laser deposited amorphous Al–Fe films. In: Journal of Materials Research, 18 (2). pp. 284-295.
Bhattacharya, P and Bhattacharya, V and Chattopadhyay, K (2002) Morphology and thermal characteristics of nano-sized Pb–Sn inclusions in Al. In: Journal of Materials Research, 17 (11). pp. 2875-2883.
Bhattacharya, P and Bhattacharya, V and Chattopadhyay, K (2002) Morphology and thermal characteristics of nano-sized Pb-Sn inclusions in Al. In: Journal of Materials Research, 17 (11). pp. 2875-2883.
Rao, Srinivasa B and Jayaram, V (2001) New technique for pressureless infiltration of Al alloys into Al2O3 preforms. In: Journal of Materials Research, 16 (10). pp. 2906-2913.
Panneerselvam, M and Subanna, GN and Rao, KJ (2001) Translucent yttrium aluminum garnet: Microwave-assisted route to synthesis and processing. In: Journal of Materials Research, 16 (10). pp. 2773-2776.
Srivastava, AK and Ranganathan, S (2001) Microstructural characterization of rapidly solidified Al-Fe-Si, Al-V-SI, and Al-Fe-V-Si alloys. In: Journal of Materials Research, 16 (7). pp. 2103-2117.
Jacob, Thomas K and Dasgupta, Niladri and Nafe, Helfried and Aldinger, Fritz (2000) Measurement of Gibbs energy of formation of LaGaO3 using a composition-graded solid electrolyte. In: Journal of Materials Research, 15 (12). pp. 2836-2843.
Nagendra, N and Jayaram, V (2000) Fracture and R-curves in high volume fraction Al2O3/Al composites. In: Journal of Materials Research, 15 (5). pp. 1131-1144.
Nagendra, N and Jayaram, V (2000) Influence of matrix characteristics on fracture toughness of high volume fraction Al2O3/Al–AlN composites. In: Journal of Materials Research, 15 (5). pp. 1145-1153.
Vaidhyanathan, B and Asokan, S and Rao, KJ (2000) Effect of CuO addition on the high-field and high-pressure behavior of microwave-prepared lead vanadate glasses. In: Journal of Materials Research, 15 (2). pp. 518-529.
Shantha, K and Varma, KBR (1999) Diffused phase transition in fine-grained bismuth vanadate ceramics. In: Journal of Materials Research, 14 (12). pp. 4651-4656.
Singh, Alok and Ranganathan, S (1999) On the indexing and reciprocal space of icosahedral quasicrystal. In: Journal of Materials Research, 14 (11). pp. 4182-4187.
Bhatia, Tania and Chattopadhyay, K and Jayaram, Vikram (1999) Segregation in the MgO–MgAl2O4 system processed from nitrate precursors. In: Journal of Materials Research, 14 (8). pp. 3319-3327.
Bhatia, Tania and Chattopadhyay, K and Jayaram, Vikram (1999) Segregation in the $MgO-MgAl_{2}O_{4}$ system processed from nitrate precursors. In: Journal of Materials Research, 14 (8). pp. 3319-3327.
Govindaraj, A and Flahaut, E and Laurent, Ch and Peigney, A and Rousset, A and Rao, CNR (1999) An investigation of carbon nanotubes obtained from the decomposition of methane over reduced Mg1− xM xAl2O4 spinel catalysts. In: Journal of Materials Research, 14 (6). 2567-2576 .
Govindaraj, A and Flahaut, E and Laurent, Ch and Peigney, A and Rousset, A and Rao, CNR (1999) An investigation of carbon nanotubes obtained from the decomposition of methane over reduced $Mg_{1-x}M_xAl_2O_4$ spinel catalysts. In: Journal of Materials Research, 14 (6). pp. 2567-2576.
Mishra, RS and Jayaram, V and Majumdar, B and Lesher, CE and Mukherjee, AK (1999) Preparation of a ZrO2–Al2O3 nanocomposite by high-pressure sintering of spray-pyrolyzed powders. In: Journal of Materials Research, 14 (3). pp. 834-840.
Mishra, RS and Jayaram, V and Majumdar, B and Lesher, CE and Mukherjee, AK (1999) Preparation of a $ZrO_{2}-Al_{2}O_{3}$ nanocomposite by high-pressure sintering of spray-pyrolyzed powders. In: Journal of Materials Research, 14 (3). pp. 834-840.
Shantha, K and Varma, KBR (1999) Dielectric, piezoelectric, and pyroelectric anisotropy in KCL- modified grain-oriented bismuth vanadate ceramics. In: Journal of Materials Research, 14 (2). pp. 476-486.
Venkatesh, K and Bobji, MS and Biswas, SK (1999) Power spectra of roughness caused by grinding of metals. In: Journal of Materials Research, 14 (2). pp. 319-322.
Singh, RA and Jayaram, V and Biswas, SK (1999) Abrasion of $Al_{2}O_{3}-SiC-(Al,Si)$ composites made by melt oxidation. In: Journal of Materials Research, 14 (1). pp. 64-67.
Bobji, MS and Biswas, SK (1998) Estimation of hardness by nanoindentation of rough surfaces. In: Journal of Materials Research, 13 (11). pp. 3227-3233.
Murugavel, S and Asokan, S (1998) Composition tunable memory and threshold switching in Al20As xTe80− x semiconducting glasses. In: Journal of Materials Research, 13 (10). pp. 2982-2987.
Murugavel, S and Asokan, S (1998) Composition tunable memory and threshold switching in Al20AsxTe802x semiconducting glasses. In: Journal of Materials Research, 13 (10). pp. 2982-2987.
Jacob, KT and Jayadevan, KP (1998) System Bi–Sr–O: Synergistic measurements of thermodynamic properties using oxide and fluoride solid electrolytes. In: Journal of Materials Research, 13 (7). pp. 1905-1918.
Devi, Anjana and Goswami, J and Lakshmi, R and Shivashankar, SA and Chandrasekaran, S (1998) A novel Cu(II) chemical vapor deposition precursor: Synthesis, characterization, and chemical vapor deposition. In: Journal of Materials Research, 13 (3). pp. 687-692.
Vaidhyanathan, B and Rao, KJ (1997) Microwave assisted synthesis of technologically important transition metal silicides. In: Journal of Materials Research, 12 (12). pp. 3225-3229.
Rajendran, M and Rao, MS (1997) Strontium and calcium zirconyl citrates as precursors for the low-temperature synthesis of SrZrO3 and CaZrO3 fine powders. In: Journal of Materials Research, 12 (10). pp. 2665-2672.
Dutta, B and Surappa, MK (1997) Studies on age-hardening characteristics of ceramic particle/matrix interfaces in Al-Cu-SiCp composites using ultra low-load-dynamic microhardness measurements. In: Journal of Materials Research, 12 (10). pp. 2773-2778.
Satishkumar, BC and Govindaraj, A and Vogl, EM and Basumallick, L and Rao, CNR (1997) Oxide nanotubes prepared using carbon nanotubes as templates. In: Journal of Materials Research, 12 (3). pp. 604-606.
Ayyappan, S and Gopalan, Srinivasa R and Subbanna, GN and Rao, CNR (1997) Nanoparticles of Ag, Au, Pd, and Cu produced by alcohol reduction of the salts. In: Journal of Materials Research, 12 (2). pp. 398-401.
Sen, R and Sumathy, R and Rao, CNR (1996) Band gaps in diamond-graphite hybrids. In: Journal of Materials Research, 11 (12). pp. 2961-2963.
Varma, KBR and Prasad, KVR (1996) Structural and dielectric properties of Bi2NbxVi−xO5.5 ceramics. In: Journal of Materials Research, 11 (9). 2288-2292 .
Varma, KBR and Prasad, KVR (1996) Structural and dielectric properties of Bi2NbxV1-xO5.5 ceramics. In: Journal of Materials Research, 11 (9). pp. 2288-2292.
Sekar, Michael MA and Halliyal, Arvind and Patil, KC (1996) Synthesis, characterization, and properties of lead-based relaxor ferroelectrics. In: Journal of Materials Research, 11 (5). pp. 1210-1218.
Chitralekha, J and Raviprasad, K and Gopal, ESR and Chattopadhyay, K (1995) Formation of metastable p phase in mechanically alloyed tellurium-rich Ag–Te alloys. In: Journal of Materials Research, 10 (8). pp. 1897-1904.
Sunder, Sai VVSS and Halliyal, A and Umarji, AM (1995) Investigation of tetragonal distortion in the $PbTiO_3$ – $BiFeO_3$ system by high-temperature x-ray diffraction. In: Journal of Materials Research, 10 (5). pp. 1301-1306.
Krishna, Ghanashyam M and Gunasekhar, KR and Mohan, S (1995) Low temperature synthesis of thin films of carbon nitride. In: Journal of Materials Research, 10 (5). pp. 1083-1085.
Ramesh, PD and Vaidhyanathan, B and Ganguli, Munia and Rao, KJ (1994) Synthesis of $\beta$–SiC powder by use of microwave radiation. In: Journal of Materials Research, 9 (12). pp. 3025-3027.
Al-Robaee, Mansour S and Krishna, Ghanashyam M and Subanna, GN and Rao, Narasimha K and Mohan, S (1994) Properties of Al2O3 films prepared by argon ion assisted deposition. In: Journal of Materials Research, 9 (10). pp. 2688-2694.
Al-Robaee, Mansour S and Krishna, Ghanashyam M and Subanna, GN and Rao, Narasimha K and Mohan, S (1994) Properties of $Al_2O_3$ films prepared by argon ion assisted deposition. In: Journal of Materials Research, 9 (10). pp. 2688-2694.
Ramesh, PD and Rao, KJ (1994) Carbothermal reduction and nitridation reaction of SiOx and preoxidized SiOx: Formation of α-Si3N4 fibers. In: Journal of Materials Research, 9 (9). pp. 2330-2340.
Ramesh, PD and Rao, KJ (1994) Carbothermal reduction and nitridation reaction of $SiO_x$ and preoxidized $SiO_x$: Formation of $\alpha - Si_3N_4$ fibers. In: Journal of Materials Research, 9 (9). pp. 2330-2340.
Rajendran, M and Rao, Subba M (1994) Synthesis and characterization of barium bis(citrato) oxozirconate(iv) tetrahydrate--A new molecular precursor for fine particle BaZrO3. In: Journal of Materials Research, 9 (9). pp. 2277-2284.
Rames, PD and Rao, KJ (1994) Preparation of β-SiAION from silica-alumina gel. In: Journal of Materials Research, 9 (8). 1929-1931 .
Hegde, MS and Satyalakshmi, KM and Mallya, RM and Rajeswari, M and Zhang, H (1994) Epitaxial LaNiO3 thin films: A normal metal barrier for SNS junction. In: Journal of Materials Research, 9 (4). pp. 898-902.
Hegde, MS and Satyalakshmi, KM and Mallya, RM and Rajeswari, M and Zhang, H (1994) Epitaxial $LaNiO_3$ thin films: A normal metal barrier for SNS junction. In: Journal of Materials Research, 9 (4). pp. 898-902.
Laurent, Ch and Demai, JJ and Rousset, A and Kannan, KR and Rao, CNR (1994) Fe–Cr/Al2O3 metal-ceramic composites: Nature and size of the metal particles formed during hydrogen reduction. In: Journal of Materials Research, 9 (1). pp. 229-235.
Mathews, Tom and Jacob, KT (1993) Decomposition temperatures of Cu2Ln2O5 (Ln = Tb, Dy, Ho, Er, Tm, Yb, and Lu) compounds. In: Journal of Materials Research, 8 (12). pp. 3015-3018.
Mathews, Tom and Jacob, KT (1993) Decomposition Temperatures of $Cu_2Ln_2O_5$ (Ln=Tb, Dy, Ho, Er, Tm, Yb, and Lu) Compounds. In: Journal of Materials Research, 8 (12). pp. 3015-3018.
Verelst, M and Kannan, KR and Subbanna, GN and Rao, CNR and Laurent, Ch and Rousset, A (1992) Investigations of the reduction behavior of Iron-impregnated alumina gels (Fe/AlOOH) and the formation of Fe0-Al2O3 metal-ceramic composites. In: Journal of Materials Research, 7 (11). pp. 3072-3079.
Prabakar, S and Rao, KJ and Rao, CNR (1991) A kinetic study of the phase transformations in Al2O3 and Na2O · 6Al2O3 by a combined use of 27Al MAS NMR spectroscopy and x-ray diffraction: Importance of nucleation. In: Journal of Materials Research, 6 (12). pp. 2701-2705.
Nagarajan, VS and Rao, KJ (1991) Evolution of crystalline zirconia structure in heat-treated ceria stabilized zirconia gels. In: Journal of Materials Research, 6 (12). pp. 2688-2693.
Prabakar, S and Rao, KJ and Rao, CNR (1991) A kinetic study of the phase transformations in $Al_2O_3$ and $Na_2O$ . $6Al_2O_3$ by a combined use of $^2^7Al\hspace{2mm} MAS\hspace{2mm} NMR$ spectroscopy and x-ray diffraction: Importance of nucleation. In: Journal of Materials Research, 6 (12). pp. 2701-2705.
Salas, O and Ni, H and Jayaram, V and Vlach, KC and Levi, CG and Mehrabian, R (1991) Nucleation and growth of Al2O3/metal composites by oxidation of aluminum alloys. In: Journal of Materials Research, 6 (9). pp. 1964-1981.
Vlach, KC and Salas, O and Ni, H and Jayaram, V and Levi, CG and Mehrabian, R (1991) A thermogravimetric study of the oxidative growth of Al2O3/Al alloy composites. In: Journal of Materials Research, 6 (9). pp. 1982-1995.
Prabakar , S and Rao, KJ and Rao, CNR (1991) A MAS NMR investigation of aluminosilicate, silicophosphate, and aluminosilicophosphate gels and the evolution of crystalline structures on heating the gels. In: Journal of Materials Research, 6 (3). pp. 592-601.
Varma, KBR and Subbanna, GN and Row, Guru TN and Rao, CNR (1990) Synthesis and characterization of layered bismuth vanadates. In: Journal of Materials Research, 5 (11). pp. 2718-2722.
Swamy, VT and Ranganathan, S and Chattopadhyay, K (1989) Rapidly solidified Al–Cr alloys: Crystalline and quasicrystalline phases. In: Journal of Materials Research, 4 (3). pp. 539-551.
Kale, GM and Jacob, KT (1989) Thermodynamic partial properties of Na2O in Nasicon solid solution, Na1+xZr2SixP3-xO12. In: Journal of Materials Research, 4 (2). pp. 417-422.
Kale, GM and Jacob, KT (1989) properties of Na2O in Nasicon solid solution, Na1+xZr2SixP3-xO12. In: Journal of Materials Research, 4 (2). pp. 417-422.
Jacob, KT and Srikanth , S (1988) Use of metastable equilibria for determination of Gibbs energy of solids. In: Journal of Materials Research, 3 (4). 687 -693.
Mukhopadhyay, NK and Thangaraj, N and Chattopadhyay, K and Ranganathan, S (1987) A comparative electron microscopic study of Al-based and Mg-based quasicrystals. In: Journal of Materials Research, 2 (3). pp. 299-304.
Mazumdar, D and Bose, DN and Parthasarathy, G and Gopal, SR (1987) High-pressure studies on lithium fast-ion conductors. In: Journal of Materials Research, 2 (3). pp. 366-373.
Jacob, KT and Shukla, AK (1987) Kinetic decomposition of Ni2SiO4 in oxygen potential gradients. In: Journal of Materials Research, 2 (3). pp. 338-344.
Jacob, KT and Shukla, AK (1987) Kinetic decomposition of {Ni_2SiO_4} in oxygen potential gradients. In: Journal of Materials Research, 2 (3). pp. 338-344.
Rao, CNR and Gopalakrishnan, J and Vidyasagar, K and Ganguli, AK and Ramanan, A and Ganapathi, L (1986) Novel metal oxides prepared by ingenious synthetic routes. In: Journal of Materials Research, 1 (2). pp. 280-294.