Up a level |
Praveenkumar, K and Vishnu, J and Samuel S, C and Gopal, V and Arivarasu, M and Lackner, JM and Meier, B and Karthik, D and Suwas, S and Swaroop, S and Prashanth, KG and Yadav, MK and Manivasagam, G (2024) High temperature dry sliding wear behaviour of selective laser melted Ti-6Al-4V alloy surfaces. In: Journal of Materials Processing Technology, 329 .
Guo, Y and Mahato, A and Sundaram, NK (2018) Controlling surface strain distribution in copper using plane strain wedge sliding. In: Journal of Materials Processing Technology, 258 . pp. 106-115.
Malik, V and Kailas, SV (2018) Plasticine modeling of material mixing in friction stir welding. In: Journal of Materials Processing Technology, 258 . pp. 80-88.
Anilchandra, AR and Surappa, MK (2010) Influence of tool rake angle on the quality of pure magnesium chip-consolidated product. In: Journal of Materials Processing Technology, 210 (3). pp. 423-428.
Barman, N and Kumar, P and Dutta, Pradip (2009) Studies on transport phenomena during solidification of an aluminum alloy in the presence of linear electromagnetic stirring. In: Journal of Materials Processing Technology, 209 (18-19). pp. 5912-5923.
Bauri, Ranjit and Surappa, MK (2009) Processing and compressive strength of Al-Li-SiCp composites fabricated by a compound billet technique. In: Journal of Materials Processing Technology, 209 (4). pp. 2077-2084.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2008) Effect of surface roughness parameters and surface texture on friction and transfer layer formation in tin-steel tribo-system. In: Journal of Materials Processing Technology, 208 (1-3). pp. 372-382.
Jeyakumar, M and Gupta, GS and Kumar, Subodh (2008) Modeling of gas flow inside and outside the nozzle used in spray deposition. In: Journal of Materials Processing Technology, 203 (1-3). pp. 471-479.
Varma, N Siva Prasad and Narasimhan, R (2008) A numerical study of the effect of loading conditions on tubular hydroforming. In: Journal of Materials Processing Technology, 196 (1-3). 174 -183.
Phaniraj, Madakasira Prabhakar and Behera, Binod Bihari and Lahiri, Ashok Kumar (2006) Thermo-mechanical modeling of two phase rolling and microstructure evolution in the hot strip mill Part-II. Microstructure evolution. In: Journal of Materials Processing Technology, 178 (1-3). pp. 388-394.
Phaniraj, Madakasira Prabhakar and Behera, Binod Bihari and Lahiri, Ashok Kumar (2005) Thermo-mechanical modeling of two phase rolling and microstructure evolution in the hot strip mill - Part I. Prediction of rolling loads and finish rolling temperature. In: Journal of Materials Processing Technology, 170 (1&2). pp. 323-335.
Phaniraj, Prabhakar Madakasira and Lahiri, Ashok Kumar (2003) The applicability of neural network model to predict flow stress for carbon steels. In: Journal of Materials Processing Technology, 141 (2). pp. 219-227.
Yu, Fuxiao and Dwarakadasa, DS and Ranganathan, S (2003) Microstructure and mechanical properties of spray-formed Al-Si-Pb alloys. In: Journal of Materials Processing Technology, 137 (1-3). pp. 164-167.
Sivaprasad, PV and Venugopal, S and Venugopal, Sridhar and Maduraimuthu, V and Vasudevan, M and Mannan, SL and Prasad, YVRK and Chaturvedi, RC (2003) Validation of processing maps for a 15Cr-15Ni-2.2Mo-0.3Ti austenitic stainless steel using hot forging and rolling tests. In: Journal of Materials Processing Technology, 132 (1-3). 262-268 .
Krishna, Gopala V and Prasad, YVRK and Birla, NC and Rao, Sambasiva G (1997) Processing map for the hot working of near-alpha titanium alloy 685. In: Journal of Materials Processing Technology, 71 (3). pp. 377-383.
Gupta, M and Surappa, MK and Qin, S (1997) Effect of interfacial characteristics on the failure-mechanism mode of a SiC reinforced Al based metal-matrix composite. In: Journal of Materials Processing Technology, 67 (1-3). pp. 94-99.
Venugopal, S and Mannan, SL and Prasad, YVRK (1997) Instability map for cold and warm working of as-cast 304 stainless steel. In: Journal of Materials Processing Technology, 65 (1-3). pp. 107-115.
Surappa, MK (1997) Microstructure evolution during solidification of DRMMCs (discontinuously reinforced metal matrix composites): State of art. In: Journal of Materials Processing Technology, 63 (1-3). pp. 325-333.
Venugopal, S and Venugopal, Sridhar and Sivaprasad, PV and Vasudevan, M and Mannan, SL and Jha, SK and Pandey, P and Prasad, YVRK (1996) Validation of processing maps for 304L stainless steel using hot forging, rolling and extrusion. In: Journal of Materials Processing Technology, 99 (04). pp. 343-350.
Somani, MC and Birla, NC and Prasad, YVRK and Singh, V (1995) Microstructural validation of processing maps using the hot extrusion of P/M Nimonic AP-1 superalloy. In: Journal of Materials Processing Technology, 52 (2-4). pp. 225-237.
Gadag, SP and Srinivasan, MN (1995) Cavitation erosion of laser-melted ductile iron. In: Journal of Materials Processing Technology, 51 (1-4). pp. 150-163.
Srinivasan, N and Prasad, YVRK (1994) Hot-working characteristics of nichrome and the development of a processing map. In: Journal of Materials Processing Technology, 41 (4). pp. 409-424.
Shamasundar, S and Tseng, AA and Aung, W and Biswas, SK (1993) Numerical and experimental study of the thermal behaviour of coining and upsetting processes. In: Journal of Materials Processing Technology, 36 (2). pp. 199-221.
Biswas, SK and Ramesh, M (1991) Study of forging design using slip-line fields. In: Journal of Materials Processing Technology, 25 (1). pp. 1-13.