|
 | Up a level |
Kar, A and Singh, K and Kumar, L (2023) Effect of Tool Rotational Speed and Mechanisms Associated with Microstructure Evolution and Intermetallics Formation in Friction Stir Welding of Aluminum Alloy to Titanium Alloy. In: Journal of Materials Engineering and Performance .
Balaraman, AA and Jeyaseelan, AA and Dutta, S (2023) Process-Controlled Domain Switching and Improved Ferroelectric Properties in Lanthanum-Modified Lead Zirconate Titanate Films. In: Journal of Materials Engineering and Performance .
Gupta, A and Shankar, G and Mahadule, D and Khatirkar, RK (2023) Correlation of Alpha Phase and Its Texture Stability in Heat-Treated Ti-6.5Al-4.4V-0.15Fe Alloy. In: Journal of Materials Engineering and Performance .
Kumar, A and Pandey, PM (2022) Investigations into Mechanical and Corrosion Properties of Mg-Based Biomaterial Sintered Using a Customized Die Setup Coupled with a Tube Furnace. In: Journal of Materials Engineering and Performance .
Das, P (2022) Microstructural Morphology and Mechanical Properties of Cooling Slope Rheocast A380 Al Alloy. In: Journal of Materials Engineering and Performance .
Gupta, A and Verma, KK and Kumar, R and Perugu, CS and Prasad, M and Agrawal, S and Khatirkar, R (2022) Electron Backscattered Diffraction Analysis Across the Welded Interface of Post Weld Heat Treated 2205 Duplex Stainless-Steel and 316L Austenitic Stainless-Steel Dissimilar Weldment. In: Journal of Materials Engineering and Performance .
Singh, MP and Basu, B and Chattopadhyay, K (2022) Probing High-Temperature Electrochemical Corrosion of 316 Stainless Steel in Molten Nitrate Salt for Concentrated Solar Power Plants. In: Journal of Materials Engineering and Performance, 31 (6). 4902 -4908.
Thiyaneshwaran, N and Sivaprasad, K and Ravisankar, B and Dash, B and Karthikeyan, S (2022) Dynamic Compression Behavior of Ti/TiAl3/Al Metal Intermetallic Laminates. In: Journal of Materials Engineering and Performance .
Shankar, G and Singh, VK and Chepuri, A and Vengatesan, B and Suwas, S (2022) Influence of Pre-strain on the Cementite Spheroidization of 22MnB5 Steel and Its Effect on Mechanical Properties. In: Journal of Materials Engineering and Performance .
Pramanik, S and Suwas, S (2022) Microstructure and Crystallographic Texture Evolution during Isothermal Annealing of Cold-Rolled Fe-6.8Al Low-Density Steel. In: Journal of Materials Engineering and Performance .
Karati, A and Ghosh, S and Mallik, RC and Shabadi, R and Murty, BS and Varadaraju, UV (2022) Effect of Processing Routes on the Microstructure and Thermoelectric Properties of Half-Heusler TiFe0.5Ni0.5Sb1−xSnx (x = 0, 0.05, 0.1, 0.2) Alloys. In: Journal of Materials Engineering and Performance, 31 (1). pp. 305-317.
Meshram, AP and Kumar, MKP and Srivastava, C (2021) Enhancement in Anti-Corrosive Behavior of Ni-P Coatings by Incorporation of Carbon Nanotubes. In: Journal of Materials Engineering and Performance, 31 (2). pp. 1573-1584.
Ummethala, R and Jayaraj, J and Karamched, PS and Rathinavelu, S and Singh, N and Surreddi, KB and Prashanth, KG (2021) In Vitro Corrosion Behavior of Selective Laser Melted Ti-35Nb-7Zr-5Ta. In: Journal of Materials Engineering and Performance .
Saini, V and Pothnis, JR and Arya, H and Yerramalli, CS and Naik, NK (2020) Correlation between Microstructure and Mechanical Properties of 6063-O Aluminum Alloy and IS 2062 Mild Steel under High Strain Rate Shear Loadings. In: Journal of Materials Engineering and Performance, 29 (8). pp. 5409-5419.
Pramanik, S and Suwas, S (2020) Effect of Cr and Mn Addition on the Microstructure, Texture, and Mechanical Properties of Ternary Low-Density Steels. In: Journal of Materials Engineering and Performance, 29 (7). pp. 4435-4445.
Arun Chandru, R and Patel, RP and Oommen, C and Raghunandan, BN (2019) Initial Studies on Development of High-Performance Nano-structured Fe 2 O 3 Catalysts for Solid Rocket Propellants. In: Journal of Materials Engineering and Performance, 28 (2). pp. 810-816.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V and Lovell, Michael R (2011) Response of Materials During Sliding on Various Surface Textures. In: Journal of Materials Engineering and Performance, 20 (8). pp. 1438-1446.
Reddy, Subba B and Kumar, Udaya (2011) Enhancement of Surface Flashover Performance of High Voltage Ceramic Disc Insulators. In: Journal of Materials Engineering and Performance, 20 (1). pp. 24-30.
Uyyuru, RK and Kailas, Satish V (2006) Numerical analysis of friction stir welding process. In: Journal of Materials Engineering and Performance, 15 (5). pp. 505-518.
Ravi, R and Prasad, YVRK and Sarma, VVS (2003) Development of Expert Systems for the Design of a Hot-Forging Process Based on Material Workability. In: Journal of Materials Engineering and Performance, 12 (6). pp. 646-652.
Avadhani, GS (2003) Optimization of Process Parameters for the Manufacturing of Rocket Casings: A Study Using Processing Maps. In: Journal of Materials Engineering and Performance, 12 (6). pp. 609-622.
Prasad, YVRK (2003) Processing Maps: A Status Report. In: Journal of Materials Engineering and Performance, 12 (6). pp. 638-645.
Kailas, SV (2003) A Study of the Strain Rate Microstructural Response and Wear of Metals. In: Journal of Materials Engineering and Performance, 12 (6). pp. 629-637.
Murali, S and Trivedi, A and Shamanna, KS and Murthy, KSS (1996) Effect of iron and combined iron and beryllium additions on the fracture toughness and microstructures of squeeze-cast Al-7Si-0.3Mg alloy. In: Journal of Materials Engineering and Performance, 5 (4). pp. 462-468.
