|
 | Up a level |
Ramdani, R and Rao, AM and Pokharel, M and Mateti, T and Likhith, K and Kumari, M and Bhatt, SS and Nune, M and Thakur, G (2023) Curcumin-Laden Crosslinked Chitosan–PVA Films: The Synergistic Impact of Genipin and Curcumin on Accelerating Wound Closure. In: JOM .
Verma, KK and Kumar, S and Suwas, S (2023) Control of Microstructure and Texture Through Strain Path Change to Improve Tensile Properties of Mg-6.9Sn-2.6Zn (TZ73) Alloy. In: JOM .
Yazar, KU and Bhattacharjee, A and Suwas, S (2022) Effect of Thermomechanical Processing on the Dwell Fatigue Behaviour of Near Alpha Titanium Alloy IMI 834. In: JOM .
Roy, A and Gupta, SK and Suwas, S and Chatterjee, K (2022) The Significance of Crystallographic Texture in Dry Etching of Titanium to Engineer Bioinspired Nanostructured Bactericidal Surfaces. In: JOM .
Aashranth, B and Shankar, G and Samantaray, D and Suwas, S (2022) The Role of Hot Deformation Texture on Dynamic Transformation of Austenite to Ferrite in a 9%Cr Alloy Steel. In: JOM .
Dhami, HS and Panda, PR and Mohanty, DP and Viswanathan, K (2022) An Analytical Method for Predicting Temperature Rise Due to Multi-body Thermal Interaction in Deformation Processing. In: JOM .
Udupa, A and Sundaram, NK and Mahato, A and Sugihara, T and Mann, JB and Chandrasekar, S (2022) What Can Plastic Flow Fields Tell Us About Heat Sources in Deformation Processing? In: JOM .
Awasthi, S (2021) A Review on Hydrogels and Ferrogels for Biomedical Applications. In: JOM, 73 (8). pp. 2440-2451.
Awasthi, S (2021) A Review on Hydrogels and Ferrogels for Biomedical Applications. In: JOM, 73 (8). pp. 2440-2451.
Perugu, CS and Verma, KK and Madhu, HC and Pambannan, P (2021) Microstructural and Texture Evolution of Hot-Rolled TA32 Alloy and Its Effect on Tensile Properties. In: JOM .
Voigt, SP and Ravikumar, K and Basu, B and Kalidindi, SR (2021) Automated Image Processing Workflow for Morphological Analysis of Fluorescence Microscopy Cell Images. In: JOM, 73 . pp. 2356-2365.
Shankar, G and Raguraman, S and Barrales Mora, LA and Suwas, S (2020) Development of Recrystallization Texture in Commercially Pure Titanium: Experiments and Simulation. In: JOM, 72 (12). pp. 4559-4573.
More, AM and Kalsar, R and Shivashankar, P and Lingam, R and Reddy, NV and Prakash, O and Suwas, S (2020) Incremental Forming of the Al-Li Alloy AA2195: Role of Texture and Microstructure. In: JOM, 72 (4). pp. 1647-1655.
Perugu, CS and Kumar, S and Suwas, S (2020) Evolution of Microstructure, Texture, and Tensile Properties in Two-Phase Mg-Li Alloys: Effect of Zn Addition. In: JOM, 72 (4). pp. 1627-1637.
Dubey, S and Awasthi, S and Nisar, A and Balani, K (2020) Role of Interfaces in Damage Initiation and Tolerance of Carbon Nanotube-Reinforced HfB2-ZrB2 Ceramics. In: JOM, 72 (6). pp. 2207-2218.
Jalali, SIA and Kumar, P and Jayaram, V (2020) Customized High-Temperature Bending with DIC for High-Throughput Determination of Creep Parameters: Technique, Instrumentation, and Optimization. In: JOM, 72 (12). pp. 4522-4538.
Jayalakshmi, S and Singh, RA and Chen, X and Konovalov, S and Srivatsan, TS and Seshan, S and Gupta, M (2020) Role of Matrix Microstructure in Governing the Mechanical Behavior and Corrosion Response of Two Magnesium Alloy Metal Matrix Composites. In: JOM, 72 (8). pp. 2880-2891.
Jalali, Syed Idrees Afzal and Kumar, Praveen and Jayaram, Vikram (2019) Creep of Metallic Materials in Bending. In: JOM, 71 (10). pp. 3565-3583.
Bibhanshu, Nitish and Bhattacharjee, Amit and Suwas, Satyam (2019) Influence of Temperature and Strain Rate on Microstructural Evolution During Hot Compression of Ti-45Al-xNb-0.2C-0.2B Titanium Aluminide Alloys. In: JOM, 71 (10). pp. 3552-3564.
Kar, Amlan and Suwas, Satyam and Kailas, Satish V (2019) Microstructural Modification and High-Temperature Grain Stability of Aluminum in an Aluminum-Titanium Friction Stir Weld with Zinc Interlayer. In: JOM, 71 (1). pp. 444-451.
Arora, Sweety and Rekha, MY and Gupta, Abhay and Srivastava, Chandan (2018) High Corrosion Resistance Offered by Multi-Walled Carbon Nanotubes Directly Grown Over Mild Steel Substrate. In: JOM, 70 (11). pp. 2590-2595.
Arora, Sweety and Srivastava, Chandan (2017) Synthesis of ZnO Nanocrystal–Graphene Composite by Mechanical Milling and Sonication-Assisted Exfoliation. In: JOM, 69 (6). pp. 1021-1026. ISSN 1047-4838
Saiphaneendra, Bachu and Srivastava, Chandan (2017) Synthesis of Graphene-Magnetite Nanoparticle Composite Using Mechanical Milling and Electrochemical Exfoliation. In: JOM, 69 (7). pp. 1143-1148.
Jaya, Nagamani and Jayaram, Vikram (2016) Fracture Testing at Small-Length Scales: From Plasticity in Si to Brittleness in Pt. In: JOM, 68 (1). pp. 94-108.
Kumar, Punith MK and Srivastava, Chandan (2016) Synthesis of Graphene from a Used Battery Electrode. In: JOM, 68 (1). pp. 374-383. (In Press)
Saiphaneendra, Bachu and Srivastava, Avi Krishna and Srivastava, Chandan (2016) Synthesis of Multimetal-Graphene Composite by Mechanical Milling. In: JOM, 68 (10). pp. 2574-2578.
Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2015) Microstructure and Crystallographic Texture Evolution During the Friction-Stir Processing of a Precipitation-Hardenable Aluminum Alloy. In: JOM, 67 (5). pp. 1014-1021.
Pramanik, Sudipta and Suwas, Satyam (2014) Low-Density Steels: The Effect of Al Addition on Microstructure and Properties. In: JOM, 66 (9). pp. 1868-1876.
Chaudhuri, Atanu and Sarkar, Apu and Kapoor, Rajeev and Singh, Ram N and Chakravartty, Jayanta K and Suwas, Satyam (2014) Microstructural Features of Hot Deformed Nb-1Zr-0.1C Alloy. In: JOM, 66 (9). pp. 1923-1929.
