|
 | Up a level |
Kumar, J and Korada, VS (2022) Seismic bearing capacity factor Nγ for a rough strip footing on sloping ground. In: Computers and Geotechnics, 152 .
Geetha Manjari, K and Sivakumar Babu, GL (2022) Reliability and sensitivity analyses of discrete fracture network based contaminant transport model in fractured rocks. In: Computers and Geotechnics, 145 . (Submitted)
Mohapatra, D and Kumar, J (2022) Homogenization based kinematic limit analysis for finding the stability of an embankment over soft clay reinforced with granular columns. In: Computers and Geotechnics, 142 .
Pandit, B and Sivakumar Babu, GL (2021) Probabilistic stability assessment of tunnel-support system considering spatial variability in weak rock mass. In: Computers and Geotechnics, 137 .
Ganesh, R and Kumar, J (2021) Ultimate bearing capacity of strip and circular foundations using power type yield criterion using the method of stress characteristics. In: Computers and Geotechnics, 133 .
Mohapatra, D and Kumar, J (2020) Kinematic limit analysis for clays with anisotropy and different strengths in compression and tension. In: Computers and Geotechnics, 126 .
Kumar, Jyant and Chakraborty, Debarghya (2012) Stability numbers for an unsupported vertical circular excavation in c-phi soil. In: Computers and Geotechnics, 39 . pp. 79-84.
Kumar, Jyant and Bhattacharya, Paramita (2010) Bearing capacity of interfering multiple strip footings by using lower bound finite elements limit analysis. In: Computers and Geotechnics, 37 (5). pp. 731-736.
Garaga, Arunakumari and Latha, Gali Madhavi (2010) Intelligent prediction of the stress-strain response of intact and jointed rocks. In: Computers and Geotechnics, 37 (5). pp. 629-637.
Khatri, Vishwas N and Kumar, Jyant (2010) Stability of an unsupported vertical circular excavation in clays under undrained condition. In: Computers and Geotechnics, 37 (3). pp. 419-424.
Khatri, Vishwas N and Kumar, Jyant (2009) Vertical uplift resistance of circular plate anchors in clays under undrained condition. In: Computers and Geotechnics, 36 (8). pp. 1352-1359.
Bharat, Tadikonda Venkata and Sivapullaiah, Puvvadi V and Allam, Mehter M (2009) Swarm intelligence-based solver for parameter estimation of laboratory through-diffusion transport of contaminants. In: Computers and Geotechnics, 36 (6). pp. 984-992.
Kouzer, KM and Kumar, Jyant (2009) Vertical uplift capacity of two interfering horizontal anchors in sand using an upper bound limit analysis. In: Computers and Geotechnics, 36 (6). pp. 1084-1089.
Haldar, Sumanta and Babu, Sivakumar GL (2008) Effect of soil spatial variability on the response of laterally loaded pile in undrained clay. In: Computers and Geotechnics, 35 (4). pp. 537-547.
Samui, Pijush (2008) Support vector machine applied to settlement of shallow foundations on cohesionless soils. In: Computers and Geotechnics, 35 (3). pp. 419-427.
Babu, Sivakumar GL and Basha, Munwar B (2008) Optimum design of cantilever sheet pile walls in sandy soils using inverse reliability approach. In: Computers and Geotechnics, 35 (2). pp. 134-143.
Babu, Sivakumar GL and Srivastava, Amit (2007) Reliability analysis of allowable pressure on shallow foundation using response surface method. In: Computers and Geotechnics, 34 (3). pp. 187-194.
Chandrashekhara, K and Antony, Joseph S (1997) Elastic Analysis of an Annular Slab-Soil Interaction Problem Using a Hybrid Method. In: Computers and Geotechnics, 20 (2). pp. 161-176.
