|
 | Up a level |
Sharma, A and Tiwary, CS and Banerjee, D (2024) Microstructural length scale manipulation via solidification and its influence on mechanical behavior in a high-strength intermetallic-based eutectic alloy. In: Journal of Materials Science .
Sharma, A and Tiwary, CS and Banerjee, D (2024) Microstructural length scale manipulation via solidification and its influence on mechanical behavior in a high-strength intermetallic-based eutectic alloy. In: Journal of Materials Science .
Kumbhakar, P and Parui, A and Ambekar, RS and Mukherjee, M and Siddique, S and Pugno, NM and Singh, AK and Tiwary, CS (2022) Rain Energy Harvesting Using Atomically Thin Gadolinium Telluride Decorated 3D Printed Nanogenerator. In: Advanced Sustainable Systems, 6 (12).
Hsieh, K and Kochat, V and Biswas, T and Tiwary, CS and Mishra, A and Ramalingam, G and Jayaraman, A and Chattopadhyay, K and Raghavan, S and Jain, M and Ghosh, A (2021) Spontaneous Time-Reversal Symmetry Breaking at Individual Grain Boundaries in Graphene. In: Physical Review Letters, 126 (20).
Pandey, P and Tiwary, CS and Chattopadhyay, K (2018) Effects of Cu and In Trace Elements on Microstructure and Thermal and Mechanical Properties of Sn-Zn Eutectic Alloy. In: JOURNAL OF ELECTRONIC MATERIALS, 48 (5). pp. 2660-2669. (In Press)
Patra, S and Verma, D and Kole, AK and Tiwary, CS and Kundu, D and Chaudhuri, S and Kumbhakar, P (2017) Optical, structural properties and antibacterial activities of uncapped and HMT capped ZnO nanoparticles. In: Materials Today Communications, 12 . pp. 133-145. ISSN 23524928
Pandey, P and Kashyap, S and Tiwary, CS and Chattopadhyay, K (2017) Development of High-Strength High-Temperature Cast Al-Ni-Cr Alloys Through Evolution of a Novel Composite Eutectic Structure. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (12). pp. 5940-5950.
Tiwary, CS and Kishore, S and Vasireddi, R and Mahapatra, DR and Ajayan, PM and Chattopadhyay, K (2017) Electronic waste recycling via cryo-milling and nanoparticle beneficiation. In: MATERIALS TODAY, 20 (2). pp. 67-73.
Pandey, P and Tiwary, CS and Chattopadhyay, K (2016) Effects of Minute Addition of Ni on Microstructure and Mechanical Properties of Sn-Zn Eutectic Alloy. In: JOURNAL OF ELECTRONIC MATERIALS, 45 (10). pp. 5468-5477.
Biswas, S and Kole, AK and Tiwary, CS and Kumbhakar, P (2016) Enhanced nonlinear optical properties of graphene oxide-silver nanocomposites measured by Z-scan technique. In: RSC ADVANCES, 6 (13). pp. 10319-10325.
Tiwary, CS and Mudakavi, Rajeev J and Kishore, Sharan and Kashyap, Sanjay and Elumalai, Rajasegaran and Chakravortty, Dipshikha and Raichur, Ashok M and Chattopadhyay, K (2016) Magnetic iron nanoparticles for in vivo targeted delivery and as biocompatible contrast agents. In: RSC ADVANCES, 6 (115). pp. 114344-114352.
Biswas, S and Kole, AK and Tiwary, CS and Kumbhakar, P (2016) Observation of Size-Dependent Electron-Phonon Scattering and Temperature-Dependent Photoluminescence Quenching in Triangular-Shaped Silver Nanoparticles. In: PLASMONICS, 11 (2). pp. 593-600.
Kole, AK and Biswas, S and Tiwary, CS and Kumbhakar, P (2016) A facile synthesis of graphene oxide-ZnS/ZnO nanocomposites and observations of thermal quenching of visible photoluminescence emission and nonlinear optical properties. In: JOURNAL OF LUMINESCENCE, 179 . pp. 211-221.
Kole, AK and Biswas, S and Tiwary, CS and Kumbhakar, P (2016) A facile synthesis of graphene oxide-ZnS/ZnO nanocomposites and observations of thermal quenching of visible photoluminescence emission and nonlinear optical properties. In: JOURNAL OF LUMINESCENCE, 179 . pp. 211-221.
Tiwary, CS and Kashyap, S and Kim, DH and Chattopadhyay, K (2015) Al based ultra-fine eutectic with high room temperature plasticity and elevated temperature strength. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 639 . pp. 359-369.
Tiwary, CS and Javvaji, B and Kumar, C and Mahapatra, DR and Ozden, S and Ajayan, PM and Chattopadhyay, K (2015) Chemical-free graphene by unzipping carbon nanotubes using cryo-milling. In: CARBON, 89 . pp. 217-224.
Nandy, Anshuman and Tiwary, CS and Dutta, A and Chattopadhyay, K and Pradhan, SK (2015) Effect of Manganese (II) Oxide on microstructure and ionic transport properties of nanostructured cubic zirconia. In: ELECTROCHIMICA ACTA, 170 . pp. 360-368.
Mohanty, S and Samal, S and Tazuddin, A and Tiwary, CS and Gurao, NP and Biswas, K (2015) Effect of processing route on phase stability in equiatomic multicomponent Ti20Fe20Ni20Co20Cu20 high entropy alloy. In: MATERIALS SCIENCE AND TECHNOLOGY, 31 (10). pp. 1214-1222.
Chakraborty, S and Tiwary, CS and Kumbhakar, P (2015) Simple chemical aqueous synthesis of dahlia nanoflower consisting of finger-like ZnO nanorods and observation of stable ultraviolet photoluminescence emission. In: JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 78 . pp. 84-89.
Tiwary, CS and Kashyap, S and Chattopadhyay, K (2014) Development of alloys with high strength at elevated temperatures by tuning the bimodal microstructure in the Al-Cu-Ni eutectic system. In: SCRIPTA MATERIALIA, 93 . pp. 20-23.
Sridhar, S and Ge, L and Tiwary, CS and Hart, AC and Ozden, S and Kalaga, K and Lei, S and Sridhar, SV and Sinha, RK and Harsh, H and Kordas, K and Ajayan, PM and Vajtai, R (2014) Enhanced Field Emission Properties from CNT Arrays Synthesized on Inconel Superalloy. In: ACS APPLIED MATERIALS & INTERFACES, 6 (3). pp. 1986-1991.
Tiwary, CS and Chakraborty, S and Mahapatra, DR and Chattopadhyay, K (2014) Length-scale dependent mechanical properties of Al-Cu eutectic alloy: Molecular dynamics based model and its experimental verification. In: JOURNAL OF APPLIED PHYSICS, 115 (20).
Tiwary, CS and Saha, S and Kumbhakar, P and Chattopadhyay, K (2014) Observation of Combined Effect of Temperature and Pressure on Cubic to Hexagonal Phase Transformation in ZnS at the Nanoscale. In: CRYSTAL GROWTH & DESIGN, 14 (9). pp. 4240-4246.
Kashyap, S and Tiwary, CS and Chattopadhyay, K (2013) Microstructural and mechanical behavior study of suction cast Nb-Si binary alloys. In: Materials Science and Engineering: A, 583 . pp. 188-198.
Tiwary, CS and Kashyap, S and Biswas, K and Chattopadhyay, K (2013) Synthesis of pure iron magnetic nanoparticles in large quantity. In: Journal of Physics D: Applied Physics, 46 (38). 385001_1-385001_6.
Tiwary, CS and Kashyap, S and Chattopadhyay, K (2013) Effect of indium addition on microstructural, mechanical and oxidation properties of suction cast Nb-Si eutectic alloy. In: Materials Science and Technology, 29 (6). pp. 702-709.
Tiwary, CS and Kashyap, S and Chattopadhyay, K (2013) Effect of Mg addition on microstructural, mechanical and environmental properties of Nb-Si eutectic composite. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 560 . pp. 200-207.
Kashyap, S and Tiwary, CS and Chattopadhyay, K (2013) Microstructure and mechanical properties of oxidation resistant suction cast Nb-Si-Al alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 559 . pp. 74-85.
Kole, AK and Tiwary, CS and Kumbhakar, P (2013) Room temperature synthesis of Mn2+ doped ZnS d-dots and observation of tunable dual emission: Effects of doping concentration, temperature, and ultraviolet light illumination. In: JOURNAL OF APPLIED PHYSICS, 113 (11).
Chakraborty, S and Tiwary, CS and Kole, AK and Kumbhakar, P and Chattopadhyay, K (2013) A simple method of synthesis and optical properties of Mn doped ZnO nanocups. In: MATERIALS LETTERS, 91 . pp. 379-382.
Tiwary, CS and Mahapatra, Roy D and Chattopadhyay, K (2012) Effect of length scale on mechanical properties of Al-Cu eutectic alloy. In: APPLIED PHYSICS LETTERS, 101 (17).
Barai, K and Tiwary, CS and Chattopadhyay, PP and Chattopadhyay, K (2012) Synthesis of free standing nanocrystalline Cu by ball milling at cryogenic temperature. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 558 . pp. 52-58.
