Effect of Footing Roughness on Bearing Capacity Factor $N_ \gamma$

Kumar, Jyant and Kouzer, KM (2007) Effect of Footing Roughness on Bearing Capacity Factor $N_ \gamma$. [Journal Article]

[thumbnail of Effect_of_Footing.pdf] PDF
Effect_of_Footing.pdf
Restricted to Registered users only

Download (959kB) | Request a copy

Abstract

The effect of interface friction angle $(\delta)$ between the footing and underlying soil mass on the bearing capacity factor $N_\gamma$ was examined by using the upper bound limit analysis, finite elements, and linear programming. The analysis was carried out by employing velocity discontinuities along all the interfaces of the chosen triangular elements. The development of the plastic strains within elements was incorporated by using an associated flow rule. It was clearly noted that an increase in leads to a continuous increase in $N_\gamma$. With $\delta=\phi$, the magnitude of $N_\gamma$ becomes almost the same as that for a perfectly rough foundation, that is, when no slippage takes place between the footing and underlying soil mass. The size of the plastic zones increases with increase in $\delta$ and $\phi$. The obtained values of $N_\gamma$, for perfectly smooth and perfectly rough footings, compare quite favorably with those reported in literature. The study demonstrates that in the case when $\delta$ is smaller than $\phi$, the assumption of a perfectly rough footing will lead to an unsafe prediction of the ultimate bearing capacity.
Item Type: Journal Article
Additional Information: Copyright of this article belongs to American Society of Civil Engineers.
Uncontrolled Keywords: Bearing capacity;Failures;Foundations;Limit analysis;Numerical analysis;Optimization;Footings;Roughness
Subjects: Division of Mechanical Sciences > Civil Engineering
Depositing User: Sumana K
Date Deposited: 27 Sep 2007
Last Modified: 19 Sep 2010 04:39
URI: http://eprints.iisc.ac.in/id/eprint/11947

Actions (login required)

View Item
View Item