Fracture Mechanics Model for Analysis of Plain and Reinforced High-Performance Concrete Beams

Prasad, Raghu BK and Bharatkumar, BH and Murthy, Ramachandra DS and Narayanan, R and Gopalakrishnan, S (2005) Fracture Mechanics Model for Analysis of Plain and Reinforced High-Performance Concrete Beams. In: Journal of Engineering Mechanics, 131 (8). pp. 831-838.

PDF Frac_Mechan.pdf Restricted to Registered users only Download (166kB) | Request a copy

Abstract

In developing a one-dimensional analysis and design procedure for reinforced concrete structures, research is generally based on yield phenomena and the plastic flow of steel in tension and concrete in compression. The ability of concrete to resist tension is considered in the form of tension stiffening or is completely disregarded. This procedure does not account for the influence of structural size in changing the failure mode and the stress distribution across the uncracked or cracked ligament. The key factor affecting this stress distribution is found to be the strain-softening modulus. This paper presents an improved model that is based on the fundamental equilibrium equation for the progressive failure of plain concrete beams. The concrete stress-strain relationship in tension is derived by calculating the peak tensile stress, and softening modulus for different depths of beams on the basis of the fracture parameters obtained with the size effect law. Thus, the proposed model uses the peak tensile stress and the softening modulus, which vary depending on the size of the beam. To study the effect of the strength of high-performance concrete (HPC) on the concrete tensile stress-strain relationship, the experimental load-deflection plots of different-sized beams are compared with those obtained by using the proposed analytical model for eight different mixes made with locally available fly ash and slag. The model is also extended for lightly reinforced concrete beams,and the results are compared with those in the literature and are found to be in good agreement.

Item Type:	Journal Article
Publication:	Journal of Engineering Mechanics
Publisher:	American Society of Civil Engineers
Additional Information:	Copyright for this article belongs to American Society of Civil Engineers.
Department/Centre:	Division of Mechanical Sciences > Civil Engineering
Date Deposited:	08 Feb 2007
Last Modified:	19 Sep 2010 04:19
URI:	http://eprints.iisc.ac.in/id/eprint/3582

Actions (login required)

View Item