Kumar, Sudarshan and Paul, PJ and Mukunda, HS (2007) Prediction of flame liftoff height of diffusion/partially premixed jet flames and modeling of mild combustion burners. In: Combustion Science and Technology, 179 (10). pp. 2219-2253.
Full text not available from this repository. (Request a copy)Abstract
In this article, a new flame extinction model based on the k/epsilon turbulence time scale concept is proposed to predict the flame liftoff heights over a wide range of coflow temperature and O-2 mass fraction of the coflow. The flame is assumed to be quenched, when the fluid time scale is less than the chemical time scale ( Da < 1). The chemical time scale is derived as a function of temperature, oxidizer mass fraction, fuel dilution, velocity of the jet and fuel type. The present extinction model has been tested for a variety of conditions: ( a) ambient coflow conditions ( 1 atm and 300 K) for propane, methane and hydrogen jet flames, ( b) highly preheated coflow, and ( c) high temperature and low oxidizer concentration coflow. Predicted flame liftoff heights of jet diffusion and partially premixed flames are in excellent agreement with the experimental data for all the simulated conditions and fuels. It is observed that flame stabilization occurs at a point near the stoichiometric mixture fraction surface, where the local flow velocity is equal to the local flame propagation speed. The present method is used to determine the chemical time scale for the conditions existing in the mild/ flameless combustion burners investigated by the authors earlier. This model has successfully predicted the initial premixing of the fuel with combustion products before the combustion reaction initiates. It has been inferred from these numerical simulations that fuel injection is followed by intense premixing with hot combustion products in the primary zone and combustion reaction follows further downstream. Reaction rate contours suggest that reaction takes place over a large volume and the magnitude of the combustion reaction is lower compared to the conventional combustion mode. The appearance of attached flames in the mild combustion burners at low thermal inputs is also predicted, which is due to lower average jet velocity and larger residence times in the near injection zone.
| Item Type: | Journal Article |
|---|---|
| Publication: | Combustion Science and Technology |
| Publisher: | Taylor and Francis Group |
| Additional Information: | Copyright of this article belongs to Taylor and Francis Group. |
| Department/Centre: | Division of Mechanical Sciences > Aerospace Engineering(Formerly Aeronautical Engineering) |
| Date Deposited: | 10 Jun 2010 06:48 |
| Last Modified: | 10 Jun 2010 06:48 |
| URI: | http://eprints.iisc.ac.in/id/eprint/26796 |
Actions (login required)
 |
View Item |
