Deposition and dielectric properties of $CaCu_3Ti_4O_{12}$ thin films deposited on $Pt/Ti/SiO_2/Si$ substrates using radio frequency magnetron sputtering

Prakash, Shri B. and Varma, KBR and Michau, Dominique and Maglione, Mario (2008) Deposition and dielectric properties of $CaCu_3Ti_4O_{12}$ thin films deposited on $Pt/Ti/SiO_2/Si$ substrates using radio frequency magnetron sputtering. In: Thin Solid Films, 516 (10). pp. 2874-2880.

Preview

PDF Deposition_and_dielectric.pdf Download (1MB)

Abstract

Polycrystalline $CaCu_3Ti_4O_{12}$ thin films were deposited on $Pt(111)/Ti/SiO_2/Si$ substrates using radio frequency magnetron sputtering. The phase formation and the physical quality of the films were crucially dependent on the substrate temperature and oxygen partial pressure. Good quality films were obtained at a substrate temperature of 650 °C and 4.86 Pa total pressure with 1% $O_2.$ The dielectric constant (\sim 5000 at 1 kHz and 400 K) of these films was comparable to those obtained by the other techniques, eventhough, it was much lower than that of the parent polycrystalline ceramics. For a given temperature of measurements, dielectric relaxation frequency in thin film was found to be much lower than that observed in the bulk. Also, activation energy associated with the dielectric relaxation for the thin film (0.5 eV) was found to be much higher than that observed in the bulk ceramic (0.1 eV). Maxwell–Wagner relaxation model was used to explain the dielectric phenomena observed in $CaCu_3Ti_4O_{12}$ thin films and bulk ceramics.

Item Type:	Journal Article
Publication:	Thin Solid Films
Publisher:	Elsevier
Additional Information:	Copyright of this article belongs to Elsevier.
Keywords:	Ceramics;Dielectric properties;Sintering;X-ray diffraction.
Department/Centre:	Division of Chemical Sciences > Materials Research Centre
Date Deposited:	06 Aug 2008
Last Modified:	19 Sep 2010 04:48
URI:	http://eprints.iisc.ac.in/id/eprint/15452

Actions (login required)

View Item