Correlation Between Miniature Cone Tip Resistance and Shear Strength Parameters of Clean and Silty Sand Using a Conventional Triaxial Setup

Kumar, Jyant and Raju, KVSB (2008) Correlation Between Miniature Cone Tip Resistance and Shear Strength Parameters of Clean and Silty Sand Using a Conventional Triaxial Setup. In: Geotechnical Testing Journal, 31 (3). GTJ100896-1-GTJ100896-11.

PDF full.pdf Restricted to Registered users only Download (477kB) | Request a copy

Abstract

The ultimate tip resistance of the cone was determined by employing a miniature cone penetrometer of diameter 19.5 mm in conventional triaxial equipment. A number of penetration tests were carried out for clean and silty sands. The variation of the tip resistance was determined with respect to changes in effective vertical stress $(\sigma_v)$.It was seen that with this laboratory experimental setup, it is possible to make a reasonable prediction of the ultimate cone tip resistance $(q_{cu})$. As expected, the tip resistance increases with an increase in $(\sigma_v)$.For the same range of the relative density, an increase in proportion of silt was found to generally cause a reduction in the tip resistance. By considering the effect of the overburden stress on internal friction angle of soil mass, it was noted that the magnitude of $q_{cu}/\sigma_v$ increases almost linearly with friction angle. The obtained values of qcu compare reasonably well with two different widely used correlations in literature. It is expected that the study will be useful for deriving correlations between shear strength parameters and the cone tip resistance for cohesionless deposits at different values of the effective overburden pressure especially for loose to medium dense states.

Item Type:	Journal Article
Publication:	Geotechnical Testing Journal
Publisher:	ASTM International
Additional Information:	Copyright of this article belongs to ASTM International.
Keywords:	Cone penetrometer test;laboratory investigations;sand;shear strength;silt.
Department/Centre:	Division of Mechanical Sciences > Civil Engineering
Date Deposited:	17 Jul 2008
Last Modified:	19 Sep 2010 04:47
URI:	http://eprints.iisc.ac.in/id/eprint/15078

Actions (login required)

View Item