|
 | Up a level |
Verma, Krishna Kamlesh and Kumar, Subodh and Suwas, Satyam (2018) Evolution of Texture during Hot Rolling of a New Magnesium Alloy. In: 10th International Conference on Processing and Manufacturing of Advanced Materials, 2018, 9-13 July, 2018, Paris; France, pp. 1023-1028.
Shankar, Gyan and Suwas, Satyam (2018) Effect of strain path change on the texture evolution after cold rolling and recrystallization of Nickel-40 wt. %Cobalt alloy. In: 18th International Conference on Textures of Materials (ICOTOM), NOV 06-10, 2017, St George, UT.
Bibhanshu, Nitish and Suwas, Satyam (2018) Hot Deformation and Dynamic Recrystallization in Titanium Aluminide. In: 10th International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications (THERMEC), JUL 09-13, 2018, Cite Sci Paris, Paris, FRANCE, pp. 1391-1396.
Acharya, Srijan and Gupta, Praveen and Chatterjee, Kaushik and Suwas, Satyam (2018) Microstructure, Texture and Mechanical Properties after Cold Working and Annealing in a Biomedical Ti-Nb-Ta Alloy. In: 10th International Conference on Processing and Manufacturing of Advanced Materials, 2018, 9-13 July, 2018, Paris; France, pp. 2465-2470.
Kalsar, Rajib and Suwas, Satyam (2018) Texture evolution in medium Mn containing TWIP steel: Experiments and Simulation. In: 18th International Conference on Textures of Materials (ICOTOM), NOV 06-10, 2017, St George, UT.
Sabat, RK and Hatwal, S and Dixit, B and Suwas, Satyam (2013) Evolution of microstructure during hot deformation of pearlitic steel. In: 5th International Conference on Recrystallization and Grain Growth (ReX&GG V), MAY 05-10, 2013 , Sydney, AUSTRALIA, pp. 459-462.
Madhavan, R and Gurao, NP and Suwas, Satyam (2012) Deformation and Recrystallization texture evolution in Nano-crystalline Nickel. In: 4th International Conference on Recrystallization and Grain Growth (ReX & GG 2010), JUL 04-09, 2010, Sheffield, ENGLAND, pp. 508-517.
Bhowmik, Ayan and Biswas, Somjeet and Dhinwal, Satyaveer Singh and Sarkar, Apu and Ray, Ranjit Kumar and Bhattacharjee, Debashish and Suwas, Satyam (2012) Microstructure and Texture Evolution in Interstitial-free (IF) Steel processed by Multi-Axial Forging. In: 16th International Conference on the Textures of Materials (ICOTOM 16, DEC 12-17, 2011 , Indian Inst Technol Bombay, Mumbai, INDIA, pp. 774-777.
Suwas, Satyam and Suresh, KS and Rollett, AD (2012) Texture and microstructure evolution during cold rolling of Cu-Fe laminates prepared by accumulative roll bonding. In: 4th International Conference on Recrystallization and Grain Growth (ReX & GG 2010), JUL 04-09, 2010, Sheffield, ENGLAND, p. 170.
Gurao, NP and Suwas, Satyam (2012) Deformation behaviour of Titanium in torsion. In: 16th International Conference on the Textures of Materials (ICOTOM 16), DEC 12-17, 2011, Indian Inst Technol Bombay, Mumbai, INDIA, pp. 826-829.
Suwas, Satyam and Gurao, Nilesh P and Ali, Ashkar (2009) Evolution of Transformation Texture in a Metastable B - Titanium Alloy. In: 15th International Conference on Textures of Materials, JUN 01-06, 2008, Pittsburgh, PA, pp. 617-628.
Biswas, Somjeet and ingh, Satyaveer D and Suwas, Satyam (2009) Grain Growth in ECAE Processed Pure Magnesium. In: International Conference on Microstructure and texture in Steels and Other Materials, FEB 05-07, 2008, Jamshedpur, pp. 465-473.
Roy, Shibayan and Suwas, Satyam and Tamirisakandala, S and Srinivasan, R and Miracle, DB (2009) Processing Response of Boron Modified Ti-6Al-4V Alloy In (alpha plus beta) Working Regime. In: 138th TMS Annual Meeting and Exhibition, FEB 15-19, 2009, San Francisco.
Gurao, Nilesh and Suwas, Satyam and Kapoor, Rajeev (2009) Study of Texture Evolution at High Strain Rates in FCC Materials. In: 15th International Conference on Textures of Materials, 15th International Conference on Textures of Materials, Pittsburgh, PA, pp. 73-81.
Roy, Shibayan and Gurao, Nilesh and Suwas, Satyam and Tamirisakandala, S and Srinivasan, R and Miracle, DB (2009) Texture Evolution in Boron Modified Ti-6Al-4V Alloy. In: 15th International Conference on Textures of Materials, JUN 01-06, 2008, Pittsburgh, PA, pp. 585-592.
Suwas, Satyam and Bhowmik, Ayan and Biswas, Somjeet (2009) Ultra-fine Grain Materials by Severe Plastic Deformation: Application to Steels. In: International Conference on Microstructure and texture in Steels and Other Materials, FEB 05-07, 2008, INDIA, pp. 325-344.
Biswas, Somjeet and Singh, Satyaveer D and Bhowmik, Ayan and Suwas, Satyam (2008) Study of texture evolution of Pure Magnesium during ECAE using EBSD. In: 4th International Conference on Nanomaterials by Severe Plastic Deformation IV, AUG 18-22, 2008, Goslar, GERMANY.
Vijaya, HS and Srinivasa, Reddy Y and Mohan, S and Suwas, Satyam and Gurao, Nilesh (2008) Structure and Crystallographic Texture evolution in NiTi films and their effect on mechanical properties. In: Proceedings of ISSS, International Conference on Smart Materials Structures and Systems Bangalore, India.
Suwas, Satyam and Biswas, Somjeet and Singh, Satyaveer D and Chattopadhyay, Kamanio (2008) Texture and grain boundary character distribution during Equal Channel Angular Extrusion of some two-phase copper alloys. In: 4th International Conference on Nanomaterials by Severe Plastic Deformation IV, AUG 18-22, 2008, Goslar, GERMANY.
Arief, Injamamul and Bhattacharjee, Yudhajit and Prakash, Om and Sahu, Megha and Suwas, Satyam and Bose, Suryasarathi (2019) Tunable CoNi microstructures in flexible multilayered polymer films can shield electromagnetic radiation. In: COMPOSITES PART B-ENGINEERING, 177 .
Kar, Amlan and Suwas, Satyam and Kailas, Satish V (2019) Multi-Length Scale Characterization of Microstructure Evolution and Its Consequence on Mechanical Properties in Dissimilar Friction Stir Welding of Titanium to Aluminum. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 50A (11). pp. 5153-5173.
Bibhanshu, Nitish and Bhattacharjee, Amit and Suwas, Satyam (2019) Influence of Temperature and Strain Rate on Microstructural Evolution During Hot Compression of Ti-45Al-xNb-0.2C-0.2B Titanium Aluminide Alloys. In: JOM, 71 (10). pp. 3552-3564.
Gupta, Aman and Khatirkar, Rajesh Kisni and Kumar, Amit and Thool, Khushahal and Bibhanshu, Nitish and Suwas, Satyam (2019) Microstructure and texture development in Ti-15V-3Cr-3Sn-3A1 alloy-Possible role of strain path. In: MATERIALS CHARACTERIZATION, 156 .
Acharya, Srijan and Bahl, Sumit and Dabas, Shaurya Singh and Hassan, Suhail and Gopal, Vasanth and Panicker, Arpana Gopi and Manivasagam, Geetha and Suwas, Satyam and Chatterjee, Kaushik (2019) Role of aging induced alpha precipitation on the mechanical and tribocorrosive performance of a beta Ti-Nb-Ta-O orthopedic alloy. In: MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 103 .
Bisht, Anuj and Kumar, Lailesh and Subburaj, Janardhanraj and Jagadeesh, Gopalan and Suwas, Satyam (2019) Effect of stacking fault energy on the evolution of microstructure and texture during blast assisted deformation of FCC materials. In: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 271 . pp. 568-583.
Karthik, D and Yazar, K U and Bisht, Anuj and Swaroop, S and Srivastava, Chandan and Suwas, Satyam (2019) Gradient plastic strain accommodation and nanotwinning in multi-pass laser shock peened 321 steel. In: APPLIED SURFACE SCIENCE, 487 . pp. 426-432.
Kalsar, Rajib and Khandal, Priyanka and Suwas, Satyam (2019) Effects of Stacking Fault Energy on Deformation Mechanisms in Al-Added Medium Mn TWIP Steel. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 50A (8). pp. 3683-3696.
Bahl, Sumit and Mishra, Sumeet and Yazar, KU and Kola, Immanuel Raju and Chatterjee, Kaushik and Suwas, Satyam (2019) Non-equilibrium microstructure, crystallographic texture and morphological texture synergistically result in unusual mechanical properties of 3D printed 316L stainless steel. In: ADDITIVE MANUFACTURING, 28 . pp. 65-77.
Bahl, Sumit and Mishra, Sumeet and Yazar, K U and Kola, Immanuel Raju and Chatterjee, Kaushik and Suwas, Satyam (2019) Non-equilibrium microstructure, crystallographic texture and morphological texture synergistically result in unusual mechanical properties of 3D printed 316L stainless steel. In: ADDITIVE MANUFACTURING, 28 . pp. 65-77.
Das, Sayan and Valiyaveettil, Suneesh Meledath and Chen, Kuei-Hsien and Suwas, Satyam and Mallik, Ramesh Chandra (2019) Thermoelectric properties of Mn doped BiCuSeO. In: MATERIALS RESEARCH EXPRESS, 6 (8).
Toth, Laszlo S and Chen, Cai and Pougis, Arnaud and Arzaghi, Mandana and Fundenberger, Jean-Jacques and Massion, Roxane and Suwas, Satyam (2019) High Pressure Tube Twisting for Producing Ultra Fine Grained Materials: A Review. In: MATERIALS TRANSACTIONS, 60 (7). pp. 1177-1191.
Pramanik, Sudipta and Ravikumar, K and Kalsar, Rajib and Suwas, Satyam and Basu, Bikramjit (2019) On the orientation relationships in phase transformation of CaTiO3. In: CERAMICS INTERNATIONAL, 45 (9). pp. 12509-12515.
Kar, Amlan and Kailas, Satish V and Suwas, Satyam (2019) Effect of Mechanical Mixing in Dissimilar Friction Stir Welding of Aluminum to Titanium with Zinc Interlayer. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 72 (6, SI). pp. 1533-1536.
Bai, Wei and Bisht, Anuj and Roy, Anish and Suwas, Satyam and Sun, Ronglei and Silberschmidt, Vadim V (2019) Improvements of machinability of aerospace-grade Inconel alloys with ultrasonically assisted hybrid machining. In: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 101 (5-8). pp. 1143-1156.
Sharma, Amit and Mohan, S and Suwas, Satyam (2019) Evidence of adaptive modulation and magnetic field induced reorientation i of variants in epitaxially grown Ni-Mn-Ga thin film on Al2O3 (11(2)over-bar0) substrate. In: MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 242 . pp. 6-16.
Prasad, Natasha and Bibhanshu, Nitish and Nayan, Niraj and Avadhani, Ganesh S and Suwas, Satyam (2019) Hot deformation behavior of the high-entropy alloy CoCuFeMnNi. In: JOURNAL OF MATERIALS RESEARCH, 34 (5, SI). pp. 744-755.
Chaudhuri, Atanu and Behera, Ananta N and Sarkar, Apu and Kapoor, Rajeev and Ray, Ranjit K and Suwas, Satyam (2019) Hot deformation behaviour of Mo-TZM and understanding the restoration processes involved. In: ACTA MATERIALIA, 164 . pp. 153-164.
Acharya, Srijan and Panicker, Arpana Gopi and Laxmi, Devara Vijaya and Suwas, Satyam and Chatterjee, Kaushik (2019) Study of the influence of Zr on the mechanical properties and functional response of Ti-Nb-Ta-Zr-O alloy for orthopedic applications. In: MATERIALS & DESIGN, 164 .
Sabban, Rushikesh and Bahl, Sumit and Chatterjee, Kaushik and Suwas, Satyam (2019) Globularization using heat treatment in additively manufactured Ti-6Al-4V for high strength and toughness. In: ACTA MATERIALIA, 162 . pp. 239-254.
Mukherjee, Shriparna and Chetty, Raju and Madduri, Prakash PV and Nayak, Ajaya K and Wojciechowski, Krzysztof and Ghosh, Tanmoy and Chattopadhyay, Kamanio and Suwas, Satyam and Mallik, Ramesh Chandra (2019) Investigation on the structure and thermoelectric properties of CuxTe binary compounds. In: DALTON TRANSACTIONS, 48 (3). pp. 1040-1050.
Kar, Amlan and Suwas, Satyam and Kailas, Satish V (2019) Microstructural Modification and High-Temperature Grain Stability of Aluminum in an Aluminum-Titanium Friction Stir Weld with Zinc Interlayer. In: JOM, 71 (1). pp. 444-451.
Purohit, Ravi Raj Purohit Purushottam Raj and Arya, Abhinav and Bojjawar, Girish and Pelerin, Maxime and Van Petegem, Steven and Proudhon, Henry and Mukherjee, Soham and Gerard, Celine and Signor, Loic and Mocuta, Cristian and Casati, Nicola and Suwas, Satyam and Chokshi, Atul H and Thilly, Ludovic (2019) Revealing the role of microstructure architecture on strength and ductility of Ni microwires by in-situ synchrotron X-ray diffraction. In: SCIENTIFIC REPORTS, 9 .
Kar, Amlan and Suwas, Satyam and Kailas, Satish V (2019) Significance of tool offset and copper interlayer during friction stir welding of aluminum to titanium. In: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 100 (1-4). pp. 435-443.
Das, Sayan and Valiyaveettil, Suneesh Meledath and Chen, Kuei-Hsien and Suwas, Satyam and Mallik, Ramesh Chandra (2019) Thermoelectric properties of Pb and Na dual doped BiCuSeO. In: AIP ADVANCES, 9 (1).
Chaudhuri, Atanu and Sarkar, Apu and Kapoor, Rajeev and Chakravartty, JK and Ray, RK and Suwas, Satyam (2019) Understanding the Mechanism of Dynamic Recrystallization During High-Temperature Deformation in Nb-1Zr-0.1C Alloy. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 28 (1). pp. 448-462.
Suwas, Satyam and Mondal, Soumita (2019) Texture Evolution in Severe Plastic Deformation Processes. In: MATERIALS TRANSACTIONS, 60 (8). pp. 1457-1471.
Kar, Amlan and Kailas, Satish V and Suwas, Satyam (2018) Effect of Zinc Interlayer in Microstructure Evolution and Mechanical Properties in Dissimilar Friction Stir Welding of Aluminum to Titanium. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 27 (11). pp. 6016-6026.
Kar, Amlan and Choudhury, Sounak K and Suwas, Satyam and Kailas, Satish V (2018) Effect of niobium interlayer in dissimilar friction stir welding of aluminum to titanium. In: MATERIALS CHARACTERIZATION, 145 . pp. 402-412.
Bisht, Anuj and Gaddam, Supreeth and Kumar, Lailesh and Dileep, BP and Suwas, Satyam (2018) Precipitation Behavior of IN718 After Surface Mechanical Attrition Treatment (SMAT) and Its Effect on Wear Properties. In: Journal of The Minerals, Metals & Materials Society, The, 70 (11). pp. 2667-2676.
Pugazhendhi, Bhagat Singh and Kar, Amlan and Sinnaeruvadi, Kumaran and Suwas, Satyam (2018) Effect of aluminium on microstructure, mechanical property and texture evolution of dual phase Mg-8Li alloy in different processing conditions. In: ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 18 (4). pp. 1332-1344.
Bahl, Sumit and Meka, Sai Rama Krishna and Suwas, Satyam and Chatterjee, Kaushik (2018) Surface Severe Plastic Deformation of an Orthopedic Ti-Nb-Sn Alloy Induces Unusual Precipitate Remodeling and Supports Stem Cell Osteogenesis through Akt Signaling. In: ACS BIOMATERIALS SCIENCE & ENGINEERING, 4 (9). pp. 3132-3142.
Roy, Shibayan and Suwas, Satyam (2018) Unique texture transition during sub beta-transus annealing of warm-rolled Ti-6Al-4V alloy: Role of orientation dependent spheroidization. In: SCRIPTA MATERIALIA, 154 . pp. 1-7.
Kalsar, Rajib and Suwas, Satyam (2018) A novel way to enhance the strength of twinning induced plasticity (TWIP) steels. In: SCRIPTA MATERIALIA, 154 . pp. 207-211.
Kumar, Amit and Khatirkar, Rajesh Kisni and Gupta, Aman and Shekhawat, Satish K and Suwas, Satyam (2018) Deciphering the Possible Role of Strain Path on the Evolution of Microstructure, Texture, and Magnetic Properties in a Fe-Cr-Ni Alloy. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A (8). pp. 3402-3418.
Mukherjee, Shriparna and Femi, Olu Emmanuel and Chetty, Raju and Chattopadhyay, Kamanio and Suwas, Satyam and Mallik, Ramesh Chandra (2018) Microstructure and thermoelectric properties of Cu2Te-Sb2Te3 pseudo-binary system. In: APPLIED SURFACE SCIENCE, 449 (SI). pp. 805-814.
Kar, Amlan and Suwas, Satyam and Kailas, Satish (2018) Two-pass friction stir welding of aluminum alloy to titanium alloy: A simultaneous improvement in mechanical properties. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 733 . pp. 199-210.
Kalsar, Rajib and Ray, Ranjit Kumar and Suwas, Satyam (2018) Effects of alloying addition on deformation mechanisms, microstructure, texture and mechanical properties in Fe-12Mn-0.5C austenitic steel. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 729 . pp. 385-397.
Ghosh, Prosenjit and Prasanna, K and Banerjee, Yogaraj and Williams, Ian and Gagan, Michael K and Chaudhuri, Atanu and Suwas, Satyam (2018) Rainfall seasonality on the Indian subcontinent during the Cretaceous greenhouse (vol 8, 8482, 2018). In: SCIENTIFIC REPORTS, 8 .
Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2018) Development of microstructure and texture during single and multiple pass friction stir processing of a strain hardenable aluminium alloy. In: MATERIALS CHARACTERIZATION, 140 . pp. 134-146.
Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2018) Development of microstructure and texture during single and multiple pass friction stir processing of a strain hardenable aluminium alloy. In: MATERIALS CHARACTERIZATION, 140 . pp. 134-146.
Tekumalla, Sravya and Bibhanshu, Nitish and Shabadi, Rajashekara and Suwas, Satyam and Ha, Thi Mai Hoa and Gupta, Manoj (2018) Evolution of texture and asymmetry and its impact on the fatigue behaviour of an in-situ magnesium nanocomposite. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 727 . pp. 61-69.
Chaudhuri, Atanu and Sarkar, Apu and Suwas, Satyam (2018) Investigation of stress-strain response, microstructure and texture of hot deformed pure molybdenum. In: INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 73 . pp. 168-182.
Bisht, Anuj and Kalsar, Rajib and Adak, Amitava and Dey, Indranuj and Jana, Kamalesh and Lad, Amit and Kumar, G Ravindra and Jagadeesh, Gopalan and Suwas, Satyam (2018) Observation of ex-situ microstructure relaxation of non-conventional misorientations post femtosecond laser shock exposure in cp-Ti. In: ACTA MATERIALIA, 150 . pp. 161-172.
Ghosh, Prosenjit and Prasanna, K and Banerjee, Yogaraj and Williams, Ian S and Gagan, Michael K and Chaudhuri, Atanu and Suwas, Satyam (2018) Rainfall seasonality on the Indian subcontinent during the Cretaceous greenhouse. In: SCIENTIFIC REPORTS, 8 .
Tekumalla, Sravya and Nandigam, Yogesh and Bibhanshu, Nitish and Rajashekara, Shabadi and Yang, Chen and Suwas, Satyam and Gupta, Manoj (2018) A strong and deformable in-situ magnesium nanocomposite igniting above 1000 degrees C. In: SCIENTIFIC REPORTS, 8 .
Athreya, CN and Mukilventhan, A and Suwas, Satyam and Vedantam, Srikanth and Sarma, VSubramanya (2018) Influence of the mode of deformation on recrystallisation behaviour of titanium through experiments, mean field theory and phase field model. In: MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 26 (3).
Bahl, Sumit and Aleti, Bhavya Tulasi and Suwas, Satyam and Chatterjee, Kaushik (2018) Surface nanostructuring of titanium imparts multifunctional properties for orthopedic and cardiovascular applications. In: MATERIALS & DESIGN, 144 . pp. 169-181.
Ghosh, Sanyukta and Bisht, Anuj and Karati, Anirudha and Rogl, Gerda and Rogl, Peter and Murty, B S and Suwas, Satyam and Mallik, Ramesh Chandra (2018) Thermoelectric properties of Co4Sb12 with Bi2Te3 nanoinclusions. In: JOURNAL OF PHYSICS-CONDENSED MATTER, 30 (9).
Gebrekrstos, Amanuel and Sharma, Maya and Bahl, Sumit and Madras, Giridhar and Suwas, Satyam and Bose, Suryasarathi (2018) Process mediated polymorphism, crystallographic texture and structure-property correlation in crystalline/amorphous blends. In: POLYMER, 138 . pp. 307-319.
Bahl, Sumit and Das, Suvam and Suwas, Satyam and Chatterjee, Kaushik (2018) Engineering the next-generation tin containing beta titanium alloys with high strength and low modulus for orthopedic applications. In: JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 78 . pp. 124-133.
Bahl, Sumit and Aleti, Bhavya Tulasi and Suwas, Satyam and Chatterjee, Kaushik (2018) Establishing the microstructure-strengthening correlation in severely deformed surface of titanium. In: PHILOSOPHICAL MAGAZINE, 98 (23). pp. 2095-2119.
Kalsar, Rajib and Kumar, Lailesh and Suwas, Satyam (2018) Grain Boundary Engineering of Medium Mn TWIP Steels: A Novel Method to Enhance the Mechanical Properties. In: ISIJ INTERNATIONAL, 58 (7). pp. 1324-1331.
Sharma, Amit and Mohan, Sangeneni and Suwas, Satyam (2018) New insights into microstructural evolution of epitaxial Ni-Mn-Ga films on MgO (100) substrate by high-resolution X-ray diffraction and orientation imaging investigations. In: PHILOSOPHICAL MAGAZINE, 98 (10, A). pp. 819-847.
Pramanik, Sudipta and Koppoju, Suresh and Anupama, AV and Sahoo, Balaram and Suwas, Satyam (2018) Strengthening mechanisms in Fe-Al based ferritic low-density steels. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 712 . pp. 574-584.
Panda, Subrata and Banerjee, Dipankar and Avadhani, GS and Suwas, Satyam (2018) A variant selection mechanism in the deformed and recrystallized matrix of a metastable -titanium alloy. In: PHILOSOPHICAL MAGAZINE LETTERS, 98 (7). pp. 273-282.
Prabhakar, Abhishek and Verma, Girish Chandra and Hariharan, Krishnasamy and Pandey, Pulak Mohan and Lee, Myoung Gyu and Suwas, Satyam (2017) Dislocation density based constitutive model for ultrasonic assisted deformation. In: MECHANICS RESEARCH COMMUNICATIONS, 85 . pp. 76-80.
Bahl, Sumit and Krishnamurthy, Akash S and Suwas, Satyam and Chatterjee, Kaushik (2017) Controlled nanoscale precipitation to enhance the mechanical and biological performances of a metastable beta Ti-Nb-Sn alloy for orthopedic applications. In: MATERIALS & DESIGN, 130 (126). pp. 226-237.
Sankar, Magesh and Suwas, Satyam and Balasubramanian, Subramanian and Manivasagam, Geetha (2017) Comparison of electrochemical behavior of hydroxyapatite coated onto WE43 Mg alloy by electrophoretic and pulsed laser deposition. In: SURFACE & COATINGS TECHNOLOGY, 309 . pp. 840-848.
Sharma, Amit and Chhangani, Sumit and Madhavan, R and Suwas, Satyam (2017) Correlation between crystallographic texture, microstructure and magnetic properties of pulse electrodeposited nanocrystalline Nickel-Cobalt alloys. In: JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 434 . pp. 68-77.
Kalsar, Rajib and Suwas, Satyam (2017) Deformation mechanisms during large strain deformation of high Mn TWIP steel. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 700 . pp. 209-219.
Gurao, N P and Suwas, Satyam (2017) Effect of Phase Contiguity and Morphology on the Evolution of Deformation Texture in Two-Phase Alloys. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (2). pp. 809-827.
Bahl, Sumit and Suwas, Satyam and Ungar, Tamas and Chatterjee, Kaushik (2017) Elucidating microstructural evolution and strengthening mechanisms in nanocrystalline surface induced by surface mechanical attrition treatment of stainless steel. In: ACTA MATERIALIA, 122 . pp. 138-151.
Loganathan, Archana and Sharma, Amit and Rudolf, Chris and Zhang, Cheng and Nautiyal, Pranjal and Suwas, Satyam and Boesl, Benjamin and Agarwal, Arvind (2017) In-situ deformation mechanism and orientation effects in sintered 2D boron nitride nanosheets. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 708 . pp. 440-450.
Athreya, CN and Mukilventhan, A and Suwas, Satyam and Vedantam, Srikanth and Sarma, V Subramanya (2017) Influence of the mode of deformation on recrystallisation kinetics in Nickel through experiments, theory and phase field model. In: PHILOSOPHICAL MAGAZINE, 97 (34, A). pp. 3211-3228.
Athreya, CN and Mukilventhan, A and Suwas, Satyam and Vedantam, Srikanth and Sarma, V Subramanya (2017) Influence of the mode of deformation on recrystallisation kinetics in Nickel through experiments, theory and phase field model. In: PHILOSOPHICAL MAGAZINE, 97 (34, A). pp. 3211-3228.
Bisht, Anuj and Ray, Nachiketa and Jagadeesh, Gopalan and Suwas, Satyam (2017) Microstructural and crystallographic response of shock-loaded pure copper. In: JOURNAL OF MATERIALS RESEARCH, 32 (8). pp. 1484-1498.
Chaudhuri, Atanu and Raghupathy, Y and Srinivasan, Dheepa and Suwas, Satyam and Srivastava, Chandan (2017) Microstructural evolution of cold-sprayed Inconel 625 superalloy coatings on low alloy steel substrate. In: ACTA MATERIALIA, 129 . pp. 11-25.
Kumar, Amit and Khatirkar, Rajesh Kisni and Chalapathi, Darshan and Kumar, Gulshan and Suwas, Satyam (2017) Microstructure and Texture Development during Cold Rolling in UNS S32205 and UNS S32760 Duplex Stainless Steels. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (5). pp. 2349-2362.
Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2017) Microstructure and Texture Evolution during Single- and Multiple-Pass Friction Stir Processing of Heat-Treatable Aluminum Alloy 2024. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (9). pp. 4247-4261.
Roy, Shibayan and Suwas, Satyam (2017) Orientation dependent spheroidization response and macro-zone formation during sub beta-transus processing of Ti-6Al-4V alloy. In: ACTA MATERIALIA, 134 . pp. 283-301.
Ravikumar, K and Kalsar, Rajib and Pramanik, Sudipta and Suwas, Satyam and Basu, Bikramjit (2017) Probing lamellar twins in spark plasma sintered CaTiO3 using Electron Backscattered Diffraction. In: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 37 (13). pp. 4235-4240.
Bahl, Sumit and Nithilaksh, P L and Suwas, Satyam and Kailas, Satish V and Chatterjee, Kaushik (2017) Processing-Microstructure-Crystallographic Texture-Surface Property Relationships in Friction Stir Processing of Titanium. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 26 (9). pp. 4206-4216.
Kandalam, Sahithya and Sabat, RK and Bibhanshu, N and Avadhani, GS and Kumar, S and Suwas, Satyam (2017) Superplasticity in high temperature magnesium alloy WE43. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 687 . pp. 85-92.
Kumar, Amit and Khatirkar, Rajesh Kisni and Chalapathi, Darshan and Bibhanshu, Nitish and Suwas, Satyam (2017) Texture development during cold rolling of Fe-Cr-Ni alloy-experiments and simulations. In: PHILOSOPHICAL MAGAZINE, 97 (23, A). pp. 1939-1962.
Das, Sayan and Chetty, Raju and Wojciechowski, Krzysztof and Suwas, Satyam and Mallik, Ramesh Chandra (2017) Thermoelectric properties of Sn doped BiCuSeO. In: APPLIED SURFACE SCIENCE, 418 (A). pp. 238-245.
Sharma, Amit and Mohan, S and Suwas, Satyam (2016) Development of bi-axial preferred orientation in epitaxial NiMnGa thin films and its consequence on magnetic properties. In: ACTA MATERIALIA, 113 . pp. 259-271.
Bommakanti, Aashranth and Roy, Shibayan and Suwas, Satyam (2016) Effect of hypoeutectic boron modification on the dynamic properties of Ti-6Al-4V alloy. In: JOURNAL OF MATERIALS RESEARCH, 31 (18). pp. 2804-2816.
Suresh, KS and Rollett, AD and Suwas, Satyam (2016) Evolution of Texture and Microstructure in Deformed and Annealed Copper-Iron Multilayer. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 47A (2). pp. 852-868.
Sharma, Amit and Mohan, Sangeneni and Suwas, Satyam (2016) Structural transformations in highly oriented seven modulated martensite Ni-Mn-Ga thin films on an Al2O3 (11(2)over-bar0) substrate. In: JOURNAL OF MATERIALS RESEARCH, 31 (19). pp. 3016-3026.
Sharma, Amit and Mohan, S and Suwas, Satyam (2016) Structural, microstructural and magnetic investigations on the epitaxially grown Ni2MnGa(010) films on MgO(100) substrate. In: INTERMETALLICS, 77 . pp. 6-13.
Bali, Ashoka and Chetty, Raju and Sharma, Amit and Rogl, Gerda and Heinrich, Patrick and Suwas, Satyam and Misra, Dinesh Kumar and Rogl, Peter and Bauer, Ernst and Mallik, Ramesh Chandra (2016) Thermoelectric properties of In and I doped PbTe. In: JOURNAL OF APPLIED PHYSICS, 120 (17).
Sharma, Amit and Mohan, S and Suwas, Satyam (2016) The effect of the deposition rate on the crystallographic texture, microstructure evolution and magnetic properties in sputter deposited Ni-Mn-Ga thin films. In: THIN SOLID FILMS, 616 . pp. 530-542.
Sharma, Amit and Mohan, S and Suwas, Satyam (2016) The influence of deposition temperature on the structure, microstructure, morphology and magnetic properties of sputter deposited nickel thin films. In: THIN SOLID FILMS, 619 . pp. 91-101.
Murty, Narayana SVS and Nayan, Niraj and Madhavan, R and Sharma, SC and George, KM and Suwas, Satyam (2015) Analysis of Microstructure and Texture Evolution in Mg-3Al-1Zn Alloy Processed Through Groove Rolling. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 24 (5). pp. 2091-2098.
Santra, Sangeeta and Suwas, Satyam and Paul, Aloke (2015) Effect of Nb orientation and deformation on the growth of Nb3Sn intermetallic superconductor by bronze technique. In: PHILOSOPHICAL MAGAZINE LETTERS, 95 (10). pp. 504-510.
Roy, Shibayan and Kannan, G and Suwas, Satyam and Surappa, MK (2015) Effect of extrusion ratio on the microstructure, texture and mechanical properties of (Mg/AZ91)(m)-SiCp composite. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 624 . pp. 279-290.
Sinha, Subhasis and Kim, Dong-Ik and Fleury, Eric and Suwas, Satyam (2015) Effect of grain boundary engineering on the microstructure and mechanical properties of copper containing austenitic stainless steel. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 626 . pp. 175-185.
Brahma, Sanjaya and Jaiswal, P and Suresh, KS and Lo, Kuang-Yao and Suwas, Satyam and Shivashankar, SA (2015) Effect of substrates and surfactants over the evolution of crystallographic texture of nanostructured ZnO thin films deposited through microwave irradiation. In: THIN SOLID FILMS, 593 . pp. 81-90.
Bahl, Sumit and Shreyas, P and Trishul, MA and Suwas, Satyam and Chatterjee, Kaushik (2015) Enhancing the mechanical and biological performance of a metallic biomaterial for orthopedic applications through changes in the surface oxide layer by nanocrystalline surface modification. In: NANOSCALE, 7 (17). pp. 7704-7716.
Ghosh, Priyadarshini and Kumar, Shishir and Ramalingam, Gopalakrishnan and Kochat, Vidya and Radhakrishnan, Madhavan and Dhar, Sukanya and Suwas, Satyam and Ghosh, Arindam and Ravishankar, N and Raghavan, Srinivasan (2015) Insights on Defect-Mediated Heterogeneous Nucleation of Graphene on Copper. In: JOURNAL OF PHYSICAL CHEMISTRY C, 119 (5). pp. 2513-2522.
Anand, N and Sankaran, S and Madhavan, R and Suwas, Satyam and Venugopal, P (2015) Microstructural Dependence of Work Hardening Behavior in Martensite-Ferrite Microalloyed Steels. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 24 (1). pp. 517-528.
Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2015) Microstructure and Crystallographic Texture Evolution During the Friction-Stir Processing of a Precipitation-Hardenable Aluminum Alloy. In: JOM, 67 (5). pp. 1014-1021.
Suresh, KS and Lahiri, Debrupa and Agarwal, Arvind and Suwas, Satyam (2015) Microstructure dependent elastic modulus variation in NiTi shape memory alloy. In: JOURNAL OF ALLOYS AND COMPOUNDS, 633 . pp. 71-74. (In Press)
Bhingardive, Viraj and Suwas, Satyam and Bose, Suryasarathi (2015) New physical insights into the electromagnetic shielding efficiency in PVDF nanocomposites containing multiwall carbon nanotubes and magnetic nanoparticles. In: RSC ADVANCES, 5 (97). pp. 79463-79472.
Bhingardive, Viraj and Sharma, Maya and Suwas, Satyam and Madras, Giridhar and Bose, Suryasarathi (2015) Polyvinylidene fluoride based lightweight and corrosion resistant electromagnetic shielding materials. In: RSC ADVANCES, 5 (45). pp. 35909-35916.
Ray, Nachiketa and Jagadeesh, Gopalan and Suwas, Satyam (2015) Response of shock wave deformation in AA5086 aluminum alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 622 . pp. 219-227.
Nadammal, Naresh and Kailas, Satish V and Szpunar, Jerzy and Suwas, Satyam (2015) Restoration Mechanisms During the Friction Stir Processing of Aluminum Alloys. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A (7). pp. 2823-2828.
Biswas, Somjeet and Brokmeier, HG and Fundenberger, JJ and Suwas, Satyam (2015) Role of deformation temperature on the evolution and heterogeneity of texture during equal channel angular pressing of magnesium. In: MATERIALS CHARACTERIZATION, 102 . pp. 98-102.
Madhavan, R and Nagaraju, S and Suwas, Satyam (2015) Texture Evolution in Nanocrystalline Nickel: Critical Role of Strain Path. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A (2). pp. 915-925.
Biswas, Somjeet and Singh, Satyaveer D and Beausir, Benoit and Toth, Laszlo S and Suwas, Satyam (2015) Thermal Response on the Microstructure and Texture of ECAP and Cold-Rolled Pure Magnesium. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A (6). pp. 2598-2613.
Chetty, Raju and Kumar, Prem DS and Rogl, Gerda and Rogl, Peter and Bauer, Ernst and Michor, Herwig and Suwas, Satyam and Puchegger, Stephan and Giester, Gerald and Mallik, Ramesh Chandra (2015) Thermoelectric properties of a Mn substituted synthetic tetrahedrite. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 17 (3). pp. 1716-1727.
Nadammal, Naresh and Kailas, Satish V and Suwas, Satyam (2015) A bottom-up approach for optimization of friction stir processing parameters; a study on aluminium 2024-T3 alloy. In: MATERIALS & DESIGN, 65 . pp. 127-138.
Sabat, RK and Mishra, RK and Sachdev, AK and Suwas, Satyam (2015) The deciding role of texture on ductility in a Ce containing Mg alloy. In: MATERIALS LETTERS, 153 . pp. 158-161.
Kolanthai, Elayaraja and Kalsar, Rajib and Bose, Suryasarathi and Suwas, Satyam and Chatterjee, Kaushik (2014) Combinatorial effect of rolling and carbonaceous nanoparticles on the evolution of crystallographic texture and structural properties of ultra high molecular weight polyethylene. In: PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 16 (42). pp. 23108-23117.
Roy, Shibayan and Madhavan, R and Suwas, Satyam (2014) Crystallographic texture and microstructure evolution during hot compression of Ti-6Al-4V-0.1B alloy in the (alpha plus beta)-regime. In: PHILOSOPHICAL MAGAZINE, 94 (4). pp. 358-380.
Madhavan, R and Suwas, Satyam (2014) Deformation of nanograined Ni-60Co alloy with low stacking fault energy. In: PHILOSOPHICAL MAGAZINE LETTERS, 94 (9). pp. 548-555.
Anbalagan, R and Rogl, Gerda and Zehetbauer, Michael and Sharma, Amit and Rogl, Peter and Suwas, Satyam and Mallik, Ramesh Chandra (2014) Effect of High-Pressure Torsion on Texture, Microstructure, and Raman Spectroscopy: Case Study of Fe- and Te-Substituted CoSb3. In: JOURNAL OF ELECTRONIC MATERIALS, 43 (10). pp. 3817-3823.
Roy, Shibayan and Suwas, Satyam (2014) Enhanced superplasticity for (alpha plus beta)-hot rolled Ti-6Al-4V-0.1B alloy by means of dynamic globularization. In: MATERIALS & DESIGN, 58 . pp. 52-64.
Suresh, KS and Kim, DongIk and Bhaumik, SK and Suwas, Satyam (2014) Evolution and stability of phases in a high temperature shape memory alloy Ni49.4Ti38.6Hf12. In: INTERMETALLICS, 44 . pp. 18-25.
Velmanirajan, K and Anuradha, K and Abu Thaheer, Syed A and Narayanasamy, R and Madhavan, R and Suwas, Satyam (2014) Experimental investigation of forming limit, void coalescence and crystallographic textures of aluminum alloy 8011 sheet annealed at various temperatures. In: ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 14 (3). pp. 398-416.
Gurao, NP and Suwas, Satyam (2014) Generalized scaling of misorientation angle distributions at meso-scale in deformed materials. In: SCIENTIFIC REPORTS, 4 (5641).
Pramanik, Sudipta and Suwas, Satyam (2014) Low-Density Steels: The Effect of Al Addition on Microstructure and Properties. In: JOM, 66 (9). pp. 1868-1876.
Chaudhuri, Atanu and Sarkar, Apu and Kapoor, Rajeev and Singh, Ram N and Chakravartty, Jayanta K and Suwas, Satyam (2014) Microstructural Features of Hot Deformed Nb-1Zr-0.1C Alloy. In: JOM, 66 (9). pp. 1923-1929.
Roy, Shibayan and Suwas, Satyam (2014) On the absence of shear cracking and grain boundary cavitation in secondary tensile regions of Ti-6Al-4V-0.1B alloy during hot (alpha plus beta)-compression. In: PHILOSOPHICAL MAGAZINE, 94 (5). pp. 447-463.
Kandalam, Sahithya and Agrawal, Priyanka and Avadhani, GS and Kumar, S and Suwas, Satyam (2014) Precipitation response of the magnesium alloy WE43 in strained and unstrained conditions. In: JOURNAL OF ALLOYS AND COMPOUNDS, 623 . pp. 317-323.
Madhavan, R and Gurao, NP and Suwas, Satyam (2014) Texture evolution during annealing of large-strain deformed nanocrystalline nickel. In: PHILOSOPHICAL MAGAZINE LETTERS, 94 (3). pp. 141-149.
Bahl, Sumit and Suwas, Satyam and Chatterjee, Kaushik (2014) The control of crystallographic texture in the use of magnesium as a resorbable biomaterial. In: RSC ADVANCES, 4 (99). pp. 55677-55684.
Bahl, Sumit and Suwas, Satyam and Chatterjee, Kaushik (2014) The importance of crystallographic texture in the use of titanium as an orthopedic biomaterial. In: RSC ADVANCES, 4 (72). pp. 38078-38087.
Suresh, KS and Kim, Dong-Ik and Bhaumik, SK and Suwas, Satyam (2013) Evolution of microstructure and texture in Ni49.4Ti38.6Hf12 shape memory alloy during hot rolling. In: Intermetallics, 42 . pp. 1-8.
Suresh, KS and Rollett, AD and Suwas, Satyam (2013) Evolution of microstructure and texture during deformation and recrystallization of heavily rolled Cu-Cu multilayer. In: Metallurgical and Materials Transactions A, 44A (8). pp. 3866-3881.
Roy, Shibayan and Suwas, Satyam (2013) Deformation mechanisms during superplastic testing of Ti-6Al-4V-0.1B alloy. In: Materials Science and Engineering: A, 574 . pp. 205-217.
Roy, Shibayan and Karanth, S and Suwas, Satyam (2013) Microstructure and texture evolution during sub-transus thermo-mechanical processing of Ti-6Al-4V-0.1B alloy: part II. static annealing in (alpha plus beta) regime. In: Metallurgical and Materials Transactions A, 44A (7). pp. 3322-3336.
Roy, Shibayan and Suwas, Satyam (2013) Microstructure and texture evolution during sub-transus thermomechanical processing of Ti-6Al-4V-0.1B alloy: part I. hot rolling in (alpha plus beta) phase field. In: Metallurgical and Materials Transactions A, 44A (7). pp. 3303-3321.
Nandi, Proloy and Suwas, Satyam and Kumar, Subodh and Chattopadhyay, Kamanio (2013) The effect of minor addition of Ni on the microstructural evolution and mechanical properties of suction cast Al-0.14 at. pct Sc binary alloy. In: Metallurgical and Materials Transactions A, 44A (6). pp. 2591-2603.
Gurao, NP and Suwas, Satyam (2013) Deformation behaviour at macro- and nano-length scales: The development of orientation gradients. In: Materials Letters, 99 . pp. 81-85.
Suresh, KS and Bhaumik, Subir K and Suwas, Satyam (2013) Effect of thermal and thermo-mechanical cycling on the microstructure of Ni-rich NiTi shape memory alloys. In: Materials Letters, 99 . pp. 150-153.
Velmanirajan, K and Abu Thaheer, Syed A and Narayanasamy, R and Madhavan, R and Suwas, Satyam (2013) Effect of Annealing Temperature in Al 1145 Alloy Sheets on Formability, Void Coalescence, and Texture Analysis. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 22 (4). pp. 1091-1107.
Gurao, NP and Manivasagam, Geetha and Govindaraj, P and Asokamani, R and Suwas, Satyam (2013) Effect of Texture and Grain Size on Bio-Corrosion Response of Ultrafine-Grained Titanium. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 44A (12). pp. 5602-5610.
Suresh, KS and Gurao, NP and Singh, Satyaveer D and Suwas, Satyam and Chattopadhyay, K and Zherebtsov, SV and Salishchev, GA (2013) Effect of equal channel angular pressing on grain refinement and texture evolution in a biomedical alloy Ti-13Nb-13Zr. In: MATERIALS CHARACTERIZATION, 82 . pp. 73-85.
Gurao, NP and Sethuraman, S and Suwas, Satyam (2013) Evolution of Texture and Microstructure in Commercially Pure Titanium with Change in Strain Path During Rolling. In: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 44A (3). pp. 1497-1507.
Biswas, Somjeet and Beausir, Benoit and Toth, Laszlo S and Suwas, Satyam (2013) Evolution of texture and microstructure during hot torsion of a magnesium alloy. In: ACTA MATERIALIA, 61 (14). pp. 5263-5277.
Kim, Ju-Heon and Kim, Dong-Ik and Suwas, Satyam and Fleury, Eric and Yi, Kyung-Woo (2013) Grain-Size Effects on the High-Temperature Oxidation of Modified 304 Austenitic Stainless Steel. In: OXIDATION OF METALS, 79 (3-4, S). pp. 239-247.
Gurao, NP and Kumar, P and Sarkar, A and Brokmeier, HG and Suwas, Satyam (2013) Simulation of Deformation Texture Evolution During Multi Axial Forging of Interstitial Free Steel. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 22 (4). pp. 1004-1009.
Chetty, Raju and Falmbigl, Matthias and Rogl, Peter and Heinrich, Patrick and Royanian, Esmaeil and Bauer, Ernst and Suwas, Satyam and Mallik, Ramesh Chandra (2013) The effect of multisubstitution on the thermoelectric properties of chalcogenide-based Cu2.1Zn0.9Sn1-xInxSe4 (0 <= x <= 0.1). In: PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 210 (11). pp. 2471-2478.
Roy, Shibayan and Suwas, Satyam (2013) The influence of temperature and strain rate on the deformation response and microstructural evolution during hot compression of a titanium alloy Ti-6Al-4V-0.1B. In: JOURNAL OF ALLOYS AND COMPOUNDS, 548 . pp. 110-125.
Roy, Shibayan and Nataraj, BR and Suwas, Satyam and Kumar, S and Chattopadhyay, K (2012) Microstructure and texture evolution during accumulative roll bonding of aluminium alloys AA2219/AA5086 composite laminates. In: JOURNAL OF MATERIALS SCIENCE, 47 (17). pp. 6402-6419.
Suresh, KS and Sinha, Subhasis and Chaudhary, Abhishek and Suwas, Satyam (2012) Development of microstructure and texture in Copper during warm accumulative roll bonding. In: MATERIALS CHARACTERIZATION, 70 . pp. 74-82.
Biswas, Somjeet and Kim, Dong-Ik and Suwas, Satyam (2012) Asymmetric and symmetric rolling of magnesium: Evolution of microstructure, texture and mechanical properties. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 550 . pp. 19-30.
Roy, Shibayan and Nataraj, BR and Suwas, Satyam and Kumar, S and Chattopadhyay, K (2012) Accumulative roll bonding of aluminum alloys 2219/5086 laminates: Microstructural evolution and tensile properties. In: Materials & Design, 36 . pp. 529-539.
Suresh, KS and Kim, Dong-Ik and Bhaumik, SK and Suwas, Satyam (2012) Interrelation of grain boundary microstructure and texture in a hot rolled Ni-rich NiTi alloy. In: Scripta Materialia, 66 (8). pp. 602-605.
Roy, Shibayan and Suwas, Satyam and Tamirisakandala, S. and Srinivasan, R. and Miracle, D. B. (2012) Microstructure and texture evolution during beta extrusion of boron modified Ti-6A1-4V alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 540 . pp. 152-163.
Biswas, Somjeet and Suwas, Satyam (2012) Evolution of sub-micron grain size and weak texture in magnesium alloy Mg-3Al-0.4Mn by a modified multi-axial forging process. In: Scripta Materialia, 66 (2). pp. 89-92.
Al-Samman, Talal and Molodov, Konstantin D and Molodov, Dmitri A and Gottstein, Guenter and Suwas, Satyam (2012) Softening and dynamic recrystallization in magnesium single crystals during c-axis compression. In: Acta Materialia, 60 (2). pp. 537-545.
Kumar, Pankaj and Gurao, Nilesh P and Haldar, Arunansu and Suwas, Satyam (2012) Texture and Microstructural Evolution in Pearlitic Steel During Triaxial Compression. In: Metallurgical and Materials Transactions A, 43A (6). pp. 2043-2055.
Gurao, NP and Kapoor, Rajeev and Suwas, Satyam (2012) Texture evolution in high strain rate deformed Cu-10Zn alloy. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 558 . pp. 761-765.
Thirumurugan, M and Kumaran, S and Suwas, Satyam and Rao, Srinivasa T (2011) Effect of rolling temperature and reduction in thickness on microstructure and mechanical properties of ZM21 magnesium alloy and its subsequent annealing treatment. In: Materials Science and Engineering A, 528 (29-30). pp. 8460-8468.
Suwas, Satyam and Ranganathan, S and Gurao, NP and Garg, Rohini (2011) Evolution of texture and grain boundary microstructure in two-phase (α + β) brass during recrystallization. In: Philosophical Magazine, 91 (32). pp. 4089-4108.
Venkatachalam, P and Roy, Shibayan and Ravisankar, B and Paul, Thomas V and Vijayalakshmi, M and Suwas, Satyam (2011) Texture evolution in an Al-Cu alloy during equal channel angular pressing: the effect of starting microstructure. In: Journal of Materials Science (full set), 46 (20). pp. 6518-6527.
Gurao, NP and Sethuraman, S and Suwas, Satyam (2011) Effect of strain path change on the evolution of texture and microstructure during rolling of copper and nickel. In: Materials Science and Engineering A, 528 (25-26). pp. 7739-7750.
Roy, Shibayan and Suwas, Satyam and Tamirisakandala, S and Miracle, DB and Srinivasan, R (2011) Development of solidification microstructure in boron-modified alloy Ti-6Al-4V-0.1B. In: Acta Materialia, 59 (14). pp. 5494-5510.
Rajaram, G and Kumaran, S and Suwas, Satyam (2011) Effect of strain rate on tensile and compression behaviour of Al-Si/graphite composite. In: Materials Science and Engineering A, 528 (19-20). pp. 6271-6278.
Gurao, NP and Kapoor, Rajeev and Suwas, Satyam (2011) Deformation behaviour of commercially pure titanium at extreme strain rates. In: Acta Materialia, 59 (9). pp. 3431-3446.
Biswas, Somjeet and Suwas, Satyam and Sikand, R and Gupta, Anil K (2011) Analysis of texture evolution in pure magnesium and the magnesium alloy AM30 during rod and tube extrusion. In: Materials Science and Engineering A, 528 (10-11). pp. 3722-3729.
Gurao, NP and Suwas, Satyam (2011) Evolution of crystallographic texture during deformation of submicron grain size titanium. In: Journal of Materials Research, 26 (4). pp. 523-532.
Suwas, Satyam and Beausir, B and Toth, LS and Fundenberger, JJ and Gottstein, G (2011) Texture evolution in commercially pure titanium after warm equal channel angular extrusion. In: Acta Materialia, 59 (3). pp. 1121-1133.
Roy, Shibayan and Tungala, Vedavyas and Suwas, Satyam (2011) Effect of Hypoeutectic Boron Addition on the beta Transus of Ti-6Al-4V Alloy. In: Metallurgical and Materials Transactions A, 42A (9). pp. 2535-2541.
Roy, Shibayan and Singh, Satyaveer D and Suwas, Satyam and Kumar, S and Chattopadhyay, K (2011) Microstructure and texture evolution during accumulative roll bonding of aluminium alloy AA5086. In: Materials Science and Engineering A, 528 (29-30). pp. 8469-8478.
Gurao, NP and Suwas, Satyam (2011) Texture evolution and operative mechanisms during large-strain deformation of nanocrystalline nickel. In: Philosophical Magazine, 91 (5). pp. 798-817.
Gurao, Nilesh P and Kapoor, Rajeev and Suwas, Satyam (2010) Effect of Strain Rate on Evolution of the Deformation Microstructure and Texture in Polycrystalline Copper and Nickel. In: Metallurgical and Materials Transactions A, 41A (11). pp. 2794-2804.
Roy, Shibayan and Sarkar, Apu and Suwas, Satyam (2010) On characterization of deformation microstructure in Boron modified Ti-6Al-4V alloy. In: Materials Science and Engineering: A, 528 (1). pp. 449-458.
Garg, Rohini and Ranganathan, S and Suwas, Satyam (2010) Effect of mode of rolling on development of texture and microstructure in two-phase (alpha plus beta) brass. In: Materials Science and Engineering A, 527 (18-19). pp. 4582-4592.
Dey, SR and Roy, Shibayan and Suwas, Satyam and Fundenberger, JJ and Ray, RK (2010) Annealing response of the intermetallic alloy Ti-22Al-25Nb. In: Intermetallics, 18 (6). pp. 1122-1131.
Biswas, Somjeet and Dhinwal, Satyaveer Singh and Suwas, Satyam (2010) Room-temperature equal channel angular extrusion of pure magnesium. In: Acta Materialia, 58 (9). pp. 3247-3261.
Bhowmik, Ayan and Biswas, Somjeet and Suwas, Satyam and Ray, RK and Bhattacharjee, D (2009) Evolution of Grain-Boundary Microstructure and Texture in Interstitial-Free Steel Processed by Equal-Channel Angular Extrusion. In: Metallurgical and Materials Transactions A, 40A (11). pp. 2729-2742.
Beausir, Benoit and Biswas, Somjeet and Kim, Dong Ik and Toth, Laszlo S and Suwas, Satyam (2009) Analysis of microstructure and texture evolution in pure magnesium during symmetric and asymmetric rolling. In: Acta Materialia, 57 (17). pp. 5061-5077.
Beausir, Benoit and Fressengeas, Claude and Gurao, Nilesh P and Toth, Laszlo S and Suwas, Satyam (2009) Spatial correlation in grain misorientation distribution. In: Acta Materialia, 57 (18). pp. 5382-5395.
Suwas, Satyam and Massion, R Arruffat and Toth, LS and Fundenberger, JJ and Beausir, B (2009) Evolution of texture during equal channel angular extrusion of commercially pure aluminum: Experiments and simulations. In: Materials Science and Engineering A, 520 (1-2). pp. 134-146.
Dey, SR and Suwas, Satyam and Fundenberger, JJ and Ray, RK (2009) Evolution of crystallographic texture and microstructure in the orthorhombic phase of a two-phase alloy Ti-22Al-25Nb. In: Intermetallics, 17 (8). pp. 622-633.
Gurao, NP and Suwas, Satyam (2009) Deformation mechanisms during large strain deformation of nanocrystalline nickel. In: Applied Physics Letters, 94 (19). 191902-1-191902-3.
Gurao, Nilesh P and Ashkar, Ali A and Suwas, Satyam (2009) Study of texture evolution in metastable beta-Ti alloy as a function of strain path and its effect on alpha transformation texture. In: Materials Science and Engineering: A, 504 (1-2). pp. 24-35.
Sarkar, Apu and Bhowmik, Ayan and Suwas, Satyam (2009) Microstructural characterization of ultrafine-grain interstitial-free steel by X-ray diffraction line profile analysis. In: Applied Physics A-Materials Science & Processing, 94 (4). pp. 943-948.
Dey, SR and Suwas, Satyam and Fundenberger, JJ and Zou, JX and Grosdidier, T and Ray, RK (2008) Evolution of hot rolling texture in \beta (B2)-phase of a two-phase (O+B2) titanium–aluminide alloy. In: Materials Science and Engineering: A, 483-48 . pp. 551-554.
Suwas, Satyam and Gottstein, G and Kumar, R (2007) Evolution of Crystallographic Texture during equal channel Angular Extrusion (ECAE) and its effects on secondary processing of magnesium. In: Materials Science and Engineering: A, 471 (1-2). pp. 1-14.
Skrotzki, Werner and Scheerbaum, Nils and Oertel, Carl Georg and Arruffat-Massion, Roxane and Suwas, Satyam and Toth, Laszlo S (2007) Microstructure and texture gradient in copper deformed by equal channel angular pressing. In: Acta Materialia, 55 (6). pp. 2013-2024.
Chatterjee, Kaushik and Suwas, Satyam and Abinandanan, TA (2022) Guest Editorial: Materials for a Sustainable Future. In: Journal of the Indian Institute of Science . ISSN 0970-4140
