|
 | Up a level |
Mahapatra, PL and Singh, AK and Tromer, R and Kumbhakar, P and Sinha, SK and Lahiri, B and Kundu, TK and Galvao, DS and Tiwary, CS (2023) Energy harvesting using two-dimensional magnesiochromite (MgCr2O4). In: Materials Today Nano, 23 .
Sarkar, S and Sinha, SK and Palaniswamy, D and Srivastava, C and Chattopadhyay, K (2023) Evolution of L12 Ordered Precipitates in Cu–Fe–Si Alloy System and Its Influence on Potential Strength–Conductivity Properties. In: Metallography, Microstructure, and Analysis .
Deb, S and Bhandary, S and Sinha, SK and Jolly, MK and Dutta, PS (2022) Identifying critical transitions in complex diseases. In: Journal of Biosciences, 47 (2).
Mahapatra, PL and Kumbhakar, P and Lahiri, B and Sinha, SK and Tiwary, CS (2022) Real-time quality monitoring and organic pollutants degradation of water using atomically thin Magnesiochromite. In: Materials Research Bulletin, 146 .
Kaur, T and Sarkar, S and Chowdhury, S and Sinha, SK and Jolly, MK and Dutta, PS (2020) Anticipating the Novel Coronavirus Disease (COVID-19) Pandemic. In: Frontiers in Public Health, 8 .
Yadav, TP and Woellner, CF and Sharifi, T and Sinha, SK and Qu, L-L and Apte, A and Mukhopadhyay, NK and Srivastava, ON and Vajtai, R and Galvão, DS and Tiwary, CS and Ajayan, PM (2020) Extraction of Two-Dimensional Aluminum Alloys from Decagonal Quasicrystals. In: ACS Nano, 14 (6). pp. 7435-7443.
Sarkar, S and Sinha, SK and Levine, H and Jolly, MK and Dutta, PS (2019) Anticipating critical transitions in epithelial-hybrid-mesenchymal cell-fate determination. In: Proceedings of the National Academy of Sciences of the United States of America, 116 (52). pp. 26343-26352.
Puthirath Balan, A and Radhakrishnan, S and Kumar, R and Neupane, R and Sinha, SK and Deng, L and De Los Reyes, CA and Apte, A and Rao, BM and Paulose, M and Vajtai, R and Chu, CW and Costin, G and MartÃ, AA and Varghese, OK and Singh, AK and Tiwary, CS and Anantharaman, MR and Ajayan, PM (2018) A Non-van der Waals Two-Dimensional Material from Natural Titanium Mineral Ore Ilmenite. In: Chemistry of Materials, 30 (17). pp. 5923-5931.
Sinha, SK and Srivastava, C and Sampath, S and Chattopadhyay, K (2015) Morphology control synthesis of Au-Cu2S metal-semiconductor hybrid nanostructures by modulating reaction constituents. In: RSC ADVANCES, 5 (70). pp. 56629-56635.
Sinha, SK and Srivastava, C and Sampath, S and Chattopadhyay, K (2015) Tunability of monodispersed intermetallic AuCu nanoparticles through understanding of reaction pathways. In: RSC ADVANCES, 5 (6). pp. 4399-4405.
Srivastava, C and Chithra, S and Malviya, KD and Sinha, SK and Chattopadhyay, K (2011) Size dependent microstructure for Ag-Ni nanoparticles. In: Acta Materialia, 59 (16). pp. 6501-6509.
Srivastava, S and Kandar, AK and Basu, JK and Mukhopadhyay, MK and Lurio, LB and Narayanan, S and Sinha, SK (2009) Complex dynamics in polymer nanocomposites. In: Physical Review E, 79 (2, Par).
Somasekhar, VT and Gopakumar, K and Shivakumar, EG and Sinha, SK (2002) A Space Vector Modulation Scheme for a Dual Two Level inverter fed Open-End Winding Induction Motor Drive for the Elimination of Zero Sequence Currents. In: EPE Journal, 12 (2). pp. 26-36.
Sauradip, M and Sinha, SK and Muthukumar, K (2001) Estimation of State of Charge of Lead Acid Battery using Radial Basis Function. In: 27th Annual Conference of the IEEE Industrial Electronics Society, 2001. IECON '01, 29 November-2 December, Colorada,USA, Vol.1, 131 -136.
Shivakumar, EG and Gopakumar, K and Sinha, SK and Pittet, Andrei and Ranganathan, VT (2001) Space Vector PWM Control of Dual Inverter Fed Open-End Winding Induction Motor Drive. In: Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2001. APEC 2001, 4-8 March, Anaheim,California, Vol.1, 399-405.
Shivakumar, EG and Somasekhar, VT and Mohapatra, Krushna K and Gopakumar, K and Umanand, L and Sinha, SK (2001) A multi level space phasor based PWM strategy for an open- end winding induction motor drive using two inverters with different DC link voltages. In: 4th IEEE International Conference on Power Electronics and Drive Systems, 2001. PEDS 2001, 22-25 October, Indonesia, Vol.1, 169-175.
Kumar, RK and Sinha, SK and Lahiri, AK (1997) Modeling of the cooling process on the runout table of a hot strip mill - A parallel approach. In: IEEE Transactions on Industry Applications, 33 (3). pp. 807-814.
Kumar, Krishna R and Sinha, SK and Lahiri, AK (1996) Modelling of the Cooling Process on the Runout Table of a Hot Strip Mill-A Parallel Approach. In: Conference Record of the 1996 IEEE Industry Applications Conference. Thirty-First IAS Annual Meeting, IAS '96, 6-10 October, San Diego,California, Vol.4, 2563 -2571.
Kumar, Krishna R and Sinha, SK and Lahiri, AK (1996) Real Time Simulator for the Runout Table of Hot Strip Mills. In: Conference Record of the 1996 IEEE Industry Applications Conference. Thirty-First IAS Annual Meeting, IAS '96, 6-10 October, San Diego,California, Vol.4, 2547-2554.
Briscoe, BJ and Evans, PD and Biswas, SK and Sinha, SK (1996) The hardnesses of poly(methylmethacrylate). In: Tribology International, 29 (2). pp. 93-104.
Sinha, SK and Biswas, SK (1995) Effect of sliding speed on friction and wear of uni-directional aramid fibre-phenolic resin composite. In: Journal of Materials Science (full set), 30 (9). pp. 2430-2437.
Briscoe, BJ and Biswas, SK and Sinha, SK and Panesar, SS (1993) The scratch hardness and friction of a soft rigid-plastic solid. In: Tribology International, 26 (3). pp. 183-193.
Kumar, Krishna R and Sinha, SK and Patnaik, LM (1993) A fault-tolerant multi-transputer architecture. In: Microprocessors and Microsystems, 17 (2). pp. 75-81.
Sinha, SK and Shrivastava, SK (1990) Optimal explicit guidance of multistage launch vehicle along three-dimensional trajectory. In: Journal of Guidance, Control, and Dynamics, 13 (3). pp. 394-403.
