|
 | Up a level |
Paul, BC and Satyam, M and Selvarajan, A (1998) Design optimization of self electro-optic effect device. In: SPIE: International workshop on Physics of Semiconductor Devices, 16-20 Dec. 1997, Delhi, India, pp. 188-191.
Rao, Srinivasa Y and Satyam, M (2003) Dielectrophoretic mechanism for downward trimming of polymer resistors. In: Microelectronics International, 20 (2). pp. 10-15.
Rao, YS and Satyam, M (2002) Effects of material parameters and processing conditions on high voltage sensitivity of polymer thick film resistors. In: Microelectronics International, 19 (2). pp. 26-31.
Natarajan, Aravind and Kalghatgi, AT and Bhat, BM and Satyam, M (2001) Role of the cesium antimonide layer in the $Na_2KSb/Cs_3Sb$ photocathode. In: Journal of Applied Physics, 90 (12). pp. 6434-6439.
Natarajan, Aravind and Kalghatgi, AT and Bhat, BM and Satyam, M (2001) Role of the cesium antimonide layer in the Na2KSb/Cs3Sb photocathode. In: Journal of Applied Physics, 90 (12). pp. 6434-6439.
Paul, BC and Satyam, M and Selvarajan, A (1999) A novel capacitive wave form transformer. In: Review of Scientific Instruments, 70 (8). pp. 3479-3482.
Paul, Bipul Chandra and Satyam, M and Selvarajan, A (1999) A Novel Method of Optical Detection Using a Capacitive Device. In: IEEE Transactions on Electron Devices, 46 (2). pp. 324-328.
Narayana, T Badri and Satyam, M (1998) Companding through shaped superconductors. In: Review of Scientific Instruments, 69 (1). pp. 317-318.
Narayana, Badri T and Satyam, M (1997) Waveform transformation using shaped superconducting films. In: Review of Scientific Instruments, 68 (1). pp. 243-245.
Rao, Srinivasa Y and Satyam, M (1997) Dielectrophoretic model of conductance increase in PVC-graphite thick film during electrical breakdown. In: International Journal of Microcircuits and Electronic Packaging, 20 (1). pp. 57-60.
Rao, Srinivasa Y and Satyam, M (1997) The effect of high voltage pulses on PVC-graphite thick film resistors. In: International Journal of Microcircuits and Electronic Packaging, 20 (1). pp. 51-56.
Shanmukha Swamy, MN and Satyam, M (1996) Dielectric constant variation of polystyrene-graphite composite material with temperature. In: Journal Of Materials Science in Electroncs, 7 (6). pp. 403-407.
Ravishankar, MK and Satyam, M (1996) Optically/Electrically (Symmetrically) Triggerable Bistable Multivibrator. In: IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications, 43 (7). 610 -612.
Sreelakshmi, K and Satyam, M (1996) Estimation of low temperature characteristics of JFETs from their room-temperature characteristics. In: Cryogenics, 36 (5). pp. 325-331.
Narayana, Badri T and Satyam, M (1995) Flash-type analog-to-digital converter using shaped superconducting film. In: Review of Scientific Instruments, 66 (7). pp. 3996-3997.
Lakshmi, MVS and Satyam, M (1995) Observation of asymmetry in U-I characteristics of contacts of the form metal 1-superconductor-metal 2. In: Physica Status Solidi A, 142 (2). pp. 483-488.
Reddy, Sankara KS and Satyam, M (1995) Structural ordering of diamond like carbon films by applied electric field. In: Solid State Communications, 93 (10). pp. 797-799.
Narayana, Badri T and Satyam, M (1995) Third harmonic generation through shaped superconductors. In: Review of Scientific Instruments, 66 (1-2). pp. 261-264.
Badrinarayana, T and Satyam, M (1995) Third harmonic generation through shaped superconductors. In: Review of Scientific Instruments, 66 (1). pp. 261-264.
Lakshmi, MVS and Satyam, M (1994) Observation of asymmetry in U�I characteristics of contacts of the form metal 1�superconductor�metal 2. In: Physica Status Solidi A, 142 (2). 483 -488 .
Suresh, PR and Ramkumar, K and Satyam, M (1994) Current-Voltage Characteristics of Grain Boundaries in Cast Polycrystalline Silicon. In: Physica Status Solidi (a), 141 (2). pp. 381-388.
Suresh, PR and Satyam, M (1993) Combined effect of aluminium diffusion and annealing on GB properties in cast polysilicon. In: Solar Energy Materials and Solar Cells, 30 (3). pp. 193-199.
Lakshmi, MVS and Ramkumar, K and Satyam, M (1992) Superconducting Bi- Sr-Ca- Cu-0 Films Prepared by the Screen Printing Technique. In: Physica Status Solidi A, 129 (1). k33-37.
Narayana, Badri T and Ramkumar, K and Satyam, M (1992) Mechanism for downward trimming of polymer resistors. In: Journal of Physics D: Applied Physics, 25 (4). pp. 717-721.
Lakshmi, MVS and Satyam, M (1992) A bidirectional clipper using superconductors. In: Cryogenics, 32 (3). pp. 300-302.
Narayana, Badri T and Ramkumar, K and Satyam, M (1991) Downward Laser Trimming of Thick Film Resistors. In: IEEE Transactions on Components, Hybrids, and Manufacturing Technology, 14 (4). pp. 894-899.
Lakshmi, MVS and Ramkumar, K and Satyam , M (1991) A wide‐range superconductor thermal sensor for low‐temperature measurement. In: Review of Scientific Instruments, 62 (11). pp. 2792-2794.
Lakshmi, MVS and Ramkumar, K and Satyam, M (1991) Role of a silver buffer layer on the superconducting Y-Ba-Cu-O films deposited by screen printing on alumina substrates. In: Journal of Materials Science, 26 (15). pp. 4092-4094.
Suresh, PR and Ramkumar, K and Satyam, M (1991) Capacitance-voltage characteristics of grain boundaries in cast polycrystalline silicon. In: Journal of Applied Physics, 69 (12). pp. 8217-8221.
Chaudhuri, UR and Ramkumar, K and Satyam, M (1990) Variation of resistivity with thickness of tin oxide films grown by spray pyrolysis. In: Journal of Physics D: Applied Physics, 23 (7). pp. 994-995.
Ramkumar, K and Satyam, M (1990) Brief communication.New static RAM cell based on the unijunction transistor. In: International Journal of Electronics, 68 (2). 195 - 199.
Chaudhuri, UR and Ramkumar, K and Satyam, M (1989) Degradation of characteristics of tin oxide films deposited by spray pyrolysis. In: Journal of Physics D:Applied Physics, 22 (9). pp. 1413-1414.
Chaudhuri, Uma Ray and Ramkumar, K and Satyam, M (1989) Electrical conduction in a tin-oxide-silicon interface prepared by spray pyrolysis. In: Journal of Applied Physics, 66 (4). pp. 1748-1752.
Lakshmi, MVS and Ramkumar, K and Satyam, M (1989) Current controlled variable resistors through superconductors. In: Review of Scientific Instruments, 60 (7). pp. 1340-1341.
Ramkumar, K and Satyam, M (1988) Analysis of effects of ambients (temperature and light intensity) on the electrical breakdown in bipolar transistors. In: International Journal of Electronics, 65 (2). pp. 193-203.
Padma, R and Ramkumar, K and Satyam, M (1988) Growth of titanium oxide overlayers by thermal oxidation of titanium. In: Journal of Materials Science (full set), 23 (5). pp. 1591-1597.
Arivoli, T and Ramkumar, K and Satyam, M (1988) Magnetoresistors based on magnetic composite materials. In: Journal of Physics D: Applied Physics, 21 (4). pp. 636-640.
Satyam, M and Anadan, M (1988) Electrical steering of Xenon plasma leading to the possibility of continuous line scan through plasma display. In: Proceedings of the Society for Information Display, 29 (1). pp. 59-63.
Satyam, M and Ramkumar, K (1987) Role of composite materials in a functional approach to miniaturisation in electronics. In: Microelectronics Journal, 18 (6). pp. 40-48.
Ramkumar, K and Satyam, M (1987) Analysis of avalanche breakdown in bipolar transistors based on majority carrier transportation. In: International Journal of Electronics, 63 (4). 541 -551.
Padma, R and Rajkumar, K and Satyam, M (1987) Electrical conductivity of thermally grown titanium oxide film. In: Journal of Materials Science, 22 (6). pp. 2083-2086.
Ramkumar, K and Satyam, M (1987) Negative-resistance characteristics of polycrystalline silicon resistors. In: Journal of Applied Physics, 62 (1). pp. 174-176.
Lalkishore, K and Ramkumar, K and Satyam, M (1987) Variable resistors based on composites. In: Journal of Physics D: Applied Physics, 20 (3). pp. 386-389.
Lalkishore, K and Ramkumar, K and Satyam, M (1987) Varistors based on barium titanate-graphite-rubber composites. In: Journal of Applied Physics, 61 (1). pp. 397-403.
Arivoli, T and Ramkumar, K and Satyam, M (1986) Magnetoresistors based on Composites. In: Journal of Physics D Applied Physics, 19 (9). pp. 183-185.
Murthy, KSRC and Satyam, M (1985) Curing And Thermal Cycling Processes In Pvc Graphite Thick-Films. In: Journal of Materials Science Letters, 4 (11). pp. 1371-1374.
Raghupati, M and Ramkumar, K and Satyam, M (1985) Priority-oriented reservation multiple access scheme for data communication through satellites. In: Computer Communications, 8 (1). pp. 22-26.
Murthy, KSRC and Ramkumar, K and Satyam, M (1984) Electrical properties of PVC-graphite thick films. In: Journal of Materials Science Letters, 3 (9). pp. 813-816.
Kumar, Ram K and Satyam, M (1983) Minority Carrier Lifetime in Polycrystalline Semiconductors. In: Physica Status Solidi A: Applied Research, 77 (2). pp. 467-470.
Kumar, KR and Satyam, M (1983) Minority-Carrier Lifetime In Polycrystalline Semiconductors. In: Physica Status Solidi A, 77 (2). pp. 467-470.
Anandan, M and Wadhwa, RP and Satyam, M and Savoor, KR (1981) Coplanar gas-discharge display. In: IEEE Transactions On Electron Devices, 28 (9). 1035 -1042.
Nagarajan, K and Satyam, M (1981) Multistage monostable multivibrator using load-coupled regenerative feedback. In: Electronics Letters, 17 (4). pp. 159-160.
Nagaraj, K and Satyam, M (1981) Novel CMOS Schmitt trigger. In: Electronics Letters, 17 (19). pp. 693-694.
Rajagopal, C and Satyam, M (1979) Studies on dielectric behavior of insulator-conductor composites. In: Journal of Applied Physics, 50 (12). pp. 8193-8197.
Rajagopal, C and Satyam, M (1979) Studies on dielectric behavior of insulator‐conductor composites. In: Journal of Applied Physics, 50 (12). pp. 8193-8197.
Rajagopal, C and Satyam, M (1978) Studies on electrical conductivity of insulator-conductor composites. In: Journal Of Applied Physics, 49 (11). pp. 5536-5542.
Viswanatha, KV and Satyam, M (1977) Characteristics of j.f.e.t.s. taking the separation of gate electrode from the source and drain electrodes into account. In: Proceedings of the Institution of Electrical Engineers, 124 (6). p. 525.
Zarab, MJ and Satyam, M (1977) Some investigations on secondary breakdown in p-n junctions considering the effect of thermally generated carriers. In: Solid-State Electronics, 20 (5). pp. 407-412.
Zarabi, MJ and Satyam, M (1974) Switching in copper oxide. In: Journal of Applied Physics, 45 (2). pp. 775-780.
Shamim, AA and Satyam, M (1971) A Method of Evaluating Electrical Response of Solion Diodes. In: IEEE Transactions on Industrial Electronics and Control Instrumentation, 18 (4). pp. 157-160.
Zarabi, MJ and Satyam, M (1971) Dispenser ion emitters. In: Review of Scientific Instruments, 42 (2). pp. 257-259.
Zarabi, MJ and Satyam, M (1970) Role of silicon carbide/mercury interface in ignitrons. In: Journal of Physics D: Applied Physics, 3 (8). pp. 1284-1289.
Gupta, KC and Satyam, M (1963) Some transient characteristics of electrically heated tungsten filaments. In: Journal of Scientific Instruments, 40 (5). pp. 244-246.
Suresh, PR and Satyam, M (1993) Behaviour of Diffused Aluminium in Cast Polysilicon. In: Physica Status Solidi A, 136 (2). K81-K84.
Natarajan, K and Ramkumar, K and Satyam, M (1989) Reverse characteristics of phosphorous passivated polysilicon p-n junction diodes. In: Physica Status Solidi A, 115 (2). K265-K268.
Natarajan, K and Ramkumar, K and Satyam, M (1989) Breakdown in p‐n junction diodes made on polycrystalline silicon of large grain size. In: Journal of Applied Physics, 66 (5). pp. 2206-2208.
Natarajan, K and Ramkumar, K and Satyam, M (1989) Capacitance of p-n Junctions under Electrical Breakdown. In: Physica Status Solidi A, 111 (2). K269-K272.
Lakshmi, MVS and Ramkumar, K and Satyam, M (1989) On superconducting Y-Ba-Cu-O films prepared by printing on lumina substrates. In: Journal of Physics D: Applied Physics, 22 (2). pp. 373-375.
Ramkumar, K and Satyam, M (1989) Research note A novel BIMOS Schmitt trigger. In: International Journal of Electronics, 66 (2). pp. 267-271.
Vishwanatha, KV and Satyam, M (1979) Effect of a linear potential variation on the gate of an FET. In: IEEE Transactions on Electron Devices, 26 (7). pp. 1102-1103.
