|
 | Up a level |
Kumar, KS and Dattaguru, B and Ramamurthy, TS and Raju, KN (1997) Fatigue crack growth studies on lug joints. In: 9th International Conference in Fracture (ICF9), Apr 01-05, 1997, Sydney, Australia.
Mani, V and Dattaguru, B and Balakrishnan, N and Ramamurthy, TS (1990) Parallel Gaussian Elimination for Banded Matrix - A Computational Model. In: IEEE Region 10 Conference on Computer and Communication Systems, Hong Kong, pp. 170-174.
Elangovan, R and Ramamurthy, TS and Dattaguru, B and Selladurai, V (2014) Analytical Determination of Residual Strength and Linkup Strength for Flat Panels, with Multiple Site Damage. In: ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 39 (3). pp. 2271-2276.
Singh, KL and Dattaguru, B and Ramamurthy, TS (2006) Fracture analysis of delaminated composite panels in compression using numerically integrated MVCCI. In: Mechanics of Advanced Materials and Structures, 13 (4). pp. 303-315.
Sastry, CVS and Mahapatra, Roy D and Gopalakrishnan, S and Ramamurthy, TS (2003) Effect of the actuation phase on the SIF in delaminated composites with embedded piezoelectric layers. In: Smart Materials and Structures, 12 (4). pp. 602-611.
Jayadevan, KR and Narasimhan, R and Ramamurthy, TS and Dattaguru, B (2003) The effect of T-stress on plane strain dynamic crack growth in elastic-plastic materials. In: Fatigue and Fracture of Engineering Materials and Structures, 26 (7). pp. 647-660.
Sastry, CVS and Mahapatra, Roy D and Gopalakrishnan, S and Ramamurthy, TS (2003) An iterative system equivalent reduction expansion process for extraction of high frequency response from reduced order finite element model. In: Computer Methods in Applied Mechanics and Engineering, 192 (15). pp. 1821-1840.
Jayadevan, KR and Narasimhan, R and Ramamurthy, TS and Dattaguru, B (2002) Constraint loss under dynamic loading in rate independent plastic solids. In: International Journal of Fracture, 116 (2). pp. 141-160.
Jayadevan, KR and Narasimhan, R and Ramamurthy, TS and Dattaguru, B (2002) Effect of T-stress and loading rate on crack initiation in rate sensitive plastic materials. In: International Journal of Solids and Structures, 39 (7). pp. 1757-1775.
Jayadevan, KR and Narasimhan, R and Ramamurthy, TS and Dattaguru, B (2001) A numerical study of T-stress in dynamically loaded fracture specimens. In: International Journal of Solids and Structures, 38 (28-29). pp. 4987-5005.
Singh, KL and Dattaguru, B and Ramamurthy, TS and Mangalgiri, PD (2000) Delamination tolerance studies in laminated composite panels. In: Sadhana- Academy Proceedings in Engineering Sciences, 25 (4). pp. 409-422.
Hosur, MV and Murthy, CRL and Ramamurthy, TS and Shet, Anita (1998) Estimation of impact-induced damage in CFRP laminates through ultrasonic imaging. In: NDT & E International, 31 (05). 359`-374.
Venkatesha, KS and Ramamurthy, TS and Dattaguru, B (1998) A study of the behaviour of subinterface cracks in bimaterial plates. In: Engineering Fracture Mechanics, 59 (2). pp. 241-252.
Narayana, KB and Dattaguru, B and Ramamurthy, TS (1997) Fracture mechanics based design procedures for pressurized components having part-through cracks. In: Theoretical and Applied Fracture Mechanics, 27 (2). pp. 149-159.
Ashbaugh, NE and Dattaguru, B and Khobaib, M and Nicholas, T and Prakash, RV and Ramamurthy, TS and Seshadri, BR and Sunder, R (1997) Experimental and analytical estimates of fatigue crack closure in an aluminium-copper alloy .2. A finite element analysis. In: Fatigue and Fracture of Engineering Materials and Structures, 20 (7). pp. 963-974.
Ashbaugh, NE and Dattaguru, B and Khobaib, M and Nicholas, T and Prakash, RV and Ramamurthy, TS and Seshadri, BR and Sunder, R (1997) Experimental and analytical estimates of fatigue crack closure in an aluminium-copper alloy 1: Laser interferometry and electron fractography. In: Fatigue & Fracture Of Engineering Materials & Structures, 20 (7). pp. 951-961.
Singh, Ripudaman and Ramamurthy, TS (1996) Thermomechanical generalization of partial contact in pin joints. In: International Journal of Mechanical Sciences, 38 (10). pp. 1059-1072.
Kumar, Satish K and Dattaguru, B and Ramamurthy, TS (1996) Analysis of a cracked lug loaded by an interference fit pin. In: International Journal of Mechanical Sciences, 38 (8-9). pp. 967-979.
Venkatesha, KS and Dattaguru, B and Ramamurthy, TS (1996) Finite Element Analysis of an Interface Crack with Large Crack-Tip Contact Zones. In: Engineering Fracture Mechanics, 54 (6). pp. 847-860.
Kumar, KS and Dattaguru, B and Ramamurthy, TS and Raju, KN (1996) Elasto-plastic contact stress analysis of joints subjected to cyclic loading. In: Computers & Structures, 60 (6). pp. 1067-1077.
Venkatesha, KS and Ramamurthy, TS and Dattaguru, B (1996) Generalized Modified Crack Closure Integral (GMCCI) and its Application to Interface Crack Problems. In: Computers and Structures, 60 (4). pp. 665-676.
Sundarraj, N and Dattaguru, D and Ramamurthy, TS (1995) Analysis of a Double Shear Lap Joint with Interference Fit Pin. In: Computers & Structures, 55 (2). pp. 357-363.
Dattaguru, B and Venkatesha, KS and Ramamurthy, TS and Buchholz, FG (1994) Finite Element Estimates of Strain Energy Release Rate Components at the Tip of an Interface Crack Under Mode I Loading. In: Engineering Fracture Mechanics, 49 (3). pp. 451-463.
Narayana, KB and Dayananda, TS and Dattaguru, B and Ramamurthy, TS and Vijayakumar, V (1994) Cracks emanating from pin-loaded lugs. In: Engineering fracture mechanics, 47 (1). 29-38 .
Narayanaa, KB and Dattaguru, B and Ramamurthy, TS and Vijayakumarb, K (1994) A general procedure for modified crack closure integral in 3D problems with cracks. In: Engineering Fracture Mechanics, 48 (1). 167 -176.
Narayana, KB and George, S and Dattaguru, B and Ramamurthy, TS and Vijayakumar, K (1994) Modified Crack Closure Integral (MCCI) For 3-D Problems Using 20-Noded Brick Elements. In: Fatigue and Fracture of Engineering Materials and Structures, 17 (2). pp. 145-157.
Narayana, KB and George, S and Dattaguru, B and Ramamurthy, TS and Vijayakumar, K (1994) Modified crack closure integral (MCCI) for 3-d problems using 20 noded brick elememnts. In: Fatigue and Fracture of Engineering Materials and Structures, 17 (2). pp. 145-157.
Singh, Ripudaman and Ramamurthy, TS (1993) Thermomechanical generalization of pin joints in finite plates. In: Computers & Structures, 47 (1). pp. 73-81.
Singh, Ripudaman and Ramamurthy, TS (1993) Thermomechanical behaviour of pin joints subjected to sheet loads. In: International Journal of Mechanical Sciences, 35 (1). pp. 1-17.
Singh, Ripudaman and Ramamurthy, TS and Rao, AK (1992) Non-uniqueness of thermoelastic contact in load bearing pin joints. In: Nuclear Engineering and Design, 135 (3). pp. 315-320.
Singh, Ripudaman and Ramamurthy, TS and Rao, AK (1992) Thermomechanical generalisation in joints: on-axis pin bearing load. In: Nuclear Engineering and Design, 135 (3). pp. 307-314.
Narayana, Badari K and Dattaguru, B and Ramamurthy, TS and Vijayakumar, K (1990) Modified Crack Closure Integral Using Six-Noded Isoparametric Quadrilateral Singular Elements. In: Engineering Fracture Mechanics, 36 (6). pp. 945-955.
Ramamurthy , TS (1989) Recent studies on the behaviour of interference fit pins in composite plates. In: Composite Structures, 13 (2). pp. 81-99.
Raj, Sundar N and Dattaguru, B and Krishnamurthy, T and Ramamurthy, TS (1987) Analysis of flange joints with elastic bolt. In: Nuclear Engineering and Design, 100 (1). pp. 41-48.
Mangalgiri, PD and Ramamurthy, TS and Dattaguru, B and Rao, AK (1987) Elastic analysis of pin joints in plates under some combined pin and plate loads. In: International Journal of Mechanical Sciences, 29 (8). 577 -585.
Ramamurthy, TS and Krishnamurthy, T and Narayana, K Badari and Vijayakuma, K and Dattaguru, B (1986) Modified crack closure integral method with quarter point elements. In: Mechanics Research Communications, 13 (4). 179 -186.
Dattaguru, B and Naidu, ACB and Krishnamurthy, T and Ramamurthy, TS (1986) Development of special fastener elements. In: Computers & Structures, 24 (1). 127 -134.
Naidu, ACB and Dattaguru, B and Mangalgiri, PD and Ramamurthy, TS (1985) Analysis of a finite composite plate with smooth rigid pin. In: Composite Structures, 4 (3). pp. 197-216.
Ramamurthy, TS and Rao, AK (1985) Analytical estimation of stress intensity factors in patched cracked plates. In: Engineering Fracture Mechanics, 21 (3). pp. 479-494.
Ramamurthy, TS and Rao, AK (1978) Influence of adhesive non-linearities on the performance and optimal length of adhesive bonded joints. In: Mechanics Research Communications, 5 (1). pp. 9-14.
Ramamurthy , TS and Rao, AK (1978) Shaping of adherends in bonded joints. In: International Journal of Mechanical Sciences, 20 (10). 721-727 .
Mangalgiri, PD and Dattaguru, B and Ramamurthy, TS (1978) Specification of skew conditions in finite element formulation. In: International Journal for Numerical Methods in Engineering, 12 (6). pp. 1037-1041.
