|
 | Up a level |
Bhat, MR and Binoy, MP and Surya, NM and Murthy, CRL and Engelbart, RW (2012) Non-destructive evaluation of porosity and its effect on mechanical properties of carbon fiber reinforced polymer composite materials. In: REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION: Volume 31, 17–22 July 2011 , Burlington, VT , pp. 1080-1087.
Vijayakumar, RL and Bhat, MR and Murthy, CRL (2012) Non-destructive evaluation of porosity and its effect on mechanical properties of carbon fiber reinforced polymer composite materials. In: REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION:, 17–22 July 2011 , Burlington, VT , pp. 1276-1283.
Phand, A and Bhat, MR and Murthy, CRL (2008) An Experimental Study for Nondestructive Evaluation of Hidden Corrosion in Aluminum 2024-T4 Alloy used for Aircraft Components. In: ASNT conference - Nondestructive Evaluation of Aerospace Materials and Structures, St. Louis, MO, USA, Louis, MO.
Praveen, RS and Jacob, Subhash and Murthy, CRL and Bhardwaj, Balachandran Suresh P and Awasthi, AM (2008) Thermal conductivity measurements of carbon in epoxy and glass epoxy composites from 300K to 80K. In: Twenty Second National Symposiun on Cryogenics (NSC-22).
Praveen, RS and Jacob, Subhash and Murthy, CRL and Bhardwaj, Balachandran Suresh P and Awasthi, AM (2008) Thermal conductivity measurements of carbon-glass hybrid composites from 300K to 20K. In: Twenty Second National Symposiun on Cryogenics (NSC-22).
Rao Mattapally, Baskar and Bhat, MR and Murthy, CRL (2007) Health Monitoring Of Composite Structures Based On Acoustic Wave Sensing Using Fiber Optic Sensors. In: Proceedings of International Conference on Advanced NDE-ANDE, Nov 2007, Korea.
Gangadharan, R and Murthy, CRL and Bhat, MR and Sen, A and Das, N and Seal, A (2007) Embedded PZT wafer sensors for structural health monitoring. In: 33rd Annual Review of Progress in Quantitative Nondestructive Evaluation, JUL 30-AUG 04, 2006, Portland.
Prasanna, G and Bhat, MR and Murthy, CRL (2007) Acoustic Emission Source Location on an Arbitrary Surface by Geodesic Curve Evolution. In: Proceedings of the 6th International Conference on Advances in Acoustic Emission, Oct-07, Nov-2007, Lake Tahoe Nevada.
Gopalakrishnan, S and Mahapatra, DR and Murthy, CRL and Bhat, MR and Gangadharan, R (2007) Damage Characterization using PWAS and Time-Frequency Signal Analysis. In: International and INCCOM-6 Conference on future trends in Composite materials and Processing, Dec 12-14 2007, IIT, Kanpur.
Bhavikatti, Shivanand and Bhat, MR and Murthy, CRL (2007) Fatigue Threshold Measurement In Ti-6al-4v Using Acoustic Emission. In: National seminar on Non-Destructive Evaluation NDE-2007, Nov 28-30 2007, Vadodara.
Vijaykumar, RL and Bhat, MR and Murthy, CRL (2007) Non Destructive Evaluation Of Adhesively Bonded Joints. In: National seminar on Non-Destructive Evaluation NDE-2007, Nov 28-30 2007, Vadodara.
Murthy, CRL and Bhat, MR (2007) Some Evolutionary Approaches in Experimental Structures. In: Proceedings of the XV-NASAS - National Seminar on Aerospace Structures, 15-16th Oct. 2007.
Gangadharan, R and Gopalakrishnan, S and Murthy, CRL and Bhat, MR (2007) Structural health monitoring of metallic structures using Lamb waves. In: National seminar on Non-Destructive Evaluation NDE-2007, Nov 28-30 2007, Vadodara.
Baskar Rao, M and Bhat, MR and Murthy, CRL (2007) Vibration-Based Damage Detection In Composite Structures Using Fiber Optic Sensors. In: National seminar on Non-Destructive Evaluation NDE-2007, Nov 28-30 2007, Vadodara.
Ravikiran, NK and Bhat, MR and Murthy, CRL and Venkataramanaiah, A (2006) Detection and Evaluation of Impact damage in CFRP Laminates Using Ultrasound C-Scan and IR Thermography. In: Proc. National Seminar on Non-Destructive Evaluation, Dec 7-9 2006, Hyderabad.
Murthy, CRL and Jayakumar, T and Raj, Baldev and Phaniraj, C and Rajasekhar, P and Bhat, MR (2006) Discrimination of Nuclear Grade Steel Samples Subjected to Different Heat Treatment Procedures Based on Acoustic Emission (AE) Data Profiling at Crack Initiation. In: Proc. National Seminar on Non-Destructive Evaluation, Dec 7-9 2006, Hyderabad.
Rao, Baskar M and Murthy, CRL and Bhat, MR and Asokan, S and Madhav, Venu K (2006) Structural Health Monitoring (SHM) Using Strain Gauges, PVDF Film and Fiber Bragg Grating (FBG) Sensors: A Comparative Study. In: Proc. National Seminar on Non-Destructive Evaluation, Dec 7-9 2006, Hyderabad.
Dwarakanath, A and Murthy, CRL and Viswanath, S and Dwarakanath, K and Rao, RMVGK (1996) Evaluation of damage in foam sandwich components of aircraft. In: 14th World Conference on NDT - Trends in NDE Science and Technology (14th WCNDT), DEC 08-13, 1996, NEW DELHI, INDIA.
Hosur, MV and Murthy, CRL (1996) Ultrasonic evaluation of delamination in quasi-isotropic CFRP laminates subjected to low-velocity impact. In: 14th World Conference on NDT - Trends in NDE Science and Technology (14th WCNDT), Dec 08-13, 1996, New Delhi, India.
Bhat, MR and Murthy, CRL (1996) An experimental approach for non-destructive evaluation of fatigue damage in CFRP composites. In: 14th World Conference on NDT - Trends in NDE Science and Technology (14th WCNDT), DEC 08-13, 1996, NEW DELHI, INDIA.
Vijaya kumar, RL and Bhat, MR and Murthy, CRL (2014) Analysis of composite single lap joints using numerical and experimental approach. In: JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 28 (10). pp. 893-914.
Kumar, Vijaya RL and Bhat, MR and Murthy, CRL (2013) Experimental analysis of composite single-lap joints using digital image correlation and comparison with theoretical models. In: Journal of Reinforced Plastics and Composites, 32 (23). pp. 1858-1876.
Kumar, Vijaya RL and Bhat, MR and Murthy, CRL (2013) Some studies on evaluation of degradation in composite adhesive joints using ultrasonic techniques. In: Ultrasonics, 53 (6). pp. 1150-1162.
Kumar, Vijaya RL and Bhat, MR and Murthy, CRL (2013) Evaluation of kissing bond in composite adhesive lap joints using digital image correlation: Preliminary studies. In: INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 42 . pp. 60-68.
Sarangapani, G and Ganguli, Ranjan and Murthy, CRL (2013) Spatial Wavelet Approach to Local Matrix Crack Detection in Composite Beams with Ply Level Material Uncertainty. In: APPLIED COMPOSITE MATERIALS, 20 (4). pp. 719-746.
Kumar, Vijaya RL and Bhat, MR and Murthy, CRL (2013) Study of Degradation in Composite Lap Shear joints using a Guided Wave Technique. In: MATERIALS EVALUATION, 71 (9). pp. 1071-1080.
Praveen, RS and Jacob, Subhash and Murthy, CRL and Balachandran, P and Rao, YVKS (2011) Hybridization of carbon-glass epoxy composites: An approach to achieve low coefficient of thermal expansion at cryogenic temperatures. In: Cryogenics, 51 (2). pp. 95-104.
Gangadharan, R and Bhat, MR and Murthy, CRL and Gopalakrishnan, S (2010) A geodesic-based triangulation technique for damage location in metallic and composite plates. In: Smart Materials and Structures, 19 (11).
Gangadharan, R and Murthy, CRL and Gopalakrishnan, S and Bhat, MR (2009) Time reversal technique for health monitoring of metallic structure using Lamb waves. In: Ultrasonics, 49 (8). pp. 696-705.
Gangadharan, R and Prasanna, G and Bhat, MR and Murthy, CRL and Gopalakrishnan, S (2009) Acoustic emission source location and damage detection in a metallic structure using a graph-theory-based geodesic pproach. In: Smart materials structures, 18 (11).
Gangadharan, R and Prasanna, G and Bhat, MR and Murthy, CRL and Gopalakrishnan, S (2009) Acoustic emission source location in composite structure by Voronoi construction using geodesic curve evolution. In: Journal Of The Acoustical Society Of America, 126 (5). pp. 2324-2330.
Gangadharan, R and Mahapatra, D Roy and Gopalakrishnan, S and Murthy, CRL and Bhat, MR (2009) On the sensitivity of elastic waves due to structural damages:Time-frequency based indexing method. In: Journal of Sound and Vibration, 320 (4-5). pp. 915-941.
Bhat, Chandrashekhar and Bhat, MR and Murthy, CRL (2008) Characterization of Failure Modes in CFRP Composites - An ANN Approach. In: Journal of Composite Materials, 42 (3). pp. 257-276.
Hosur, Mahesh V and Jain, Kunal and Chowdhury, Farhan and Jeelani, Shaik and Bhat, MR and Murthy, CRL (2007) Low-velocity impact response of carbon/epoxy laminates subjected to cold–dry and cold–moist conditioning. In: Composite Structures, 79 (2). pp. 300-311.
Bar, HN and Bhat, MR and Murthy, CRL (2005) Parametric analysis of acoustic emission signals for evaluating damage in composites using a PVDF film sensor. In: Journal of Nondestructive Evaluation, 24 (4). pp. 121-134.
Bar, HN and Bhat, MR and Murthy, CRL (2004) Identification of failure modes in GFRP using PVDF sensors: ANN approach. In: Composite Structures, 65 (2). pp. 231-237.
Bar, HN and Bhat, MR and Murthy, CRL (2004) Identification of failure modes in GFRP using PVDF sensors: ANN approach. In: Composite Structures, 65 (2). 231–237.
Bhat, Chandrashekhar and Bhat, MR and Murthy, CRL (2003) Acoustic emission characterization of failure modes in composites with ANN. In: Composite Structures, 61 (3). pp. 213-220.
Majeed, MA and Murthy, CRL (2002) On using peak amplitude and rise time for AE source characterization. In: Sadhana : Academy Proceedings in Engineering Sciences, 27 (part 3). pp. 295-307.
Kulkarni, SM and Anuradha, D and Murthy, CRL and Kishore, * (2002) Analysis of filler-fibre interaction in fly ash filled short fibre-epoxy composites using ultrasonic NDE. In: Bulletin of Materials Science, 25 (2). pp. 137-140.
Majeed, MA and Murthy, CRL (2001) A model with nonzero rise time for AE signals. In: Sadhana, 25 (5). pp. 465-474.
Rao, Nagaraja GM and Murthy, CRL (2001) Dual role of microcracks: toughening and degradation. In: Canadian Geotechnical Journal, 38 (2). pp. 427-440.
Ravishankar, SR and Murthy, CRL (2000) Application of acoustic emission in drilling of composite laminates. In: NDT & E International, 33 (6). pp. 429-435.
Ravishankar, SR and Murthy, CRL (2000) Characteristics of AE signals obtained during drilling composite laminates. In: NDT & E International, 33 (5). pp. 341-348.
Hosur, MV and Murthy, CRL and Ramurthy, TS (1999) Compression after impact testing of carbon fiber reinforced plastic laminates. In: Journal of Composites Technology & Research, 21 (2). pp. 51-64.
Hosur, MV and Murthy, CRL and Ramamurthy, TS and Shet, Anita (1998) Estimation of impact-induced damage in CFRP laminates through ultrasonic imaging. In: NDT & E International, 31 (05). 359`-374.
Majeed, MA and Murthy, CRL (1994) A double exponential model for AE signals. In: Journal of Acoustic Emission, 12 (3-4). pp. 107-110.
Bhat, MR and Majeed, MA and Murthy, CRL (1994) Characterization of fatigue damage in unidirectional GFRP composites through acoustic emission signal analysis. In: NDT & E International, 27 (1). pp. 27-32.
Bhat, MR and Murthy, CRL (1993) Fatigue damage stages in unidirectional glass-fiber-epoxy composites: identification through acoustic emission technique. In: International Journal of Fatigue, 15 (5). pp. 401-405.
Kalyanasundaram, P and Raj, B and Kasiviswanathan, KV and Jayakumar, T and Murthy, CRL (1992) Leak Detection In Pressure Tubes Of A Pressurized Heavy-Water Reactor By Acoustic-Emission Technique. In: British Journal of Non-destructive Testing, 34 (11). pp. 539-543.
Murthy, CRL (1990) Nondestructive Evaluation in Quality Assurance. In: Indian Journal of Technology, 28 (6-8). pp. 512-519.
Kalyanasundaram, P and Jayakumar, T and Raj, B and Murthy, CRL and Krishnan, A (1989) Acoustic emission technique for leak detection in an end shield of a pressurised heavy water reactor. In: International Journal of Pressure Vessels and Piping, 36 (1). pp. 65-74.
Rao, AK and Murthy, CRL (1987) Indian developments in ultrasonics and acoustic emission methods. In: International Journal of Pressure Vessels and Piping, 28 (1-5). 171 -178.
