|
 | Up a level |
Laha, K and Chandravathi, KS and Rao, KBS and Mannan, SL and Sastry, DH (2000) Microstructural evaluation and creep deformation and rupture behavior of 9Cr-1Mo steel base metal, weld metal and weld joint. In: Workshop on Creep, Fatigue and Creep-Fatigue Interaction, JAN 20-22, 1999, Indira Gandhi Centre Atomic Research, Kalpakkam, India, pp. 217-221.
Srinivasan, VS and Valsan, M and Rao, KBS and Mannan, SL and Sastry, DH (1996) Low cycle fatigue behaviour of a nitrogen modified 316L stainless steel at 823 K. In: Workshop on the Phenomena of Creep, Fatigue, and Creep-Fatigue Interactions, FEB 15-17, 1995, KALPAKKAM, INDIA, pp. 489-495.
Sivaprasad, PV and Mannan, SL and Prasad, YVRK (2004) Processing Parameters for the Mechanical Working of 9 Cr-1 Mo Steel: Processing Maps Approach. In: Materials Science and Technology, 20 (12). pp. 1545-1550.
Sivaprasad, PV and Venugopal, S and Venugopal, Sridhar and Maduraimuthu, V and Vasudevan, M and Mannan, SL and Prasad, YVRK and Chaturvedi, RC (2003) Validation of processing maps for a 15Cr-15Ni-2.2Mo-0.3Ti austenitic stainless steel using hot forging and rolling tests. In: Journal of Materials Processing Technology, 132 (1-3). 262-268 .
Laha, K and Latha, S and Rao, Bhanu Sankara K and Mannan, SL and Sastry, DH (2001) Comparison of creep behaviour of 2.25Cr-1Mo/9Cr - 1Mo dissimilar weld joint with its base and weld metals. In: Materials Science and Technology, 17 (10). pp. 1265-1272.
Laha, K and Chandravathi, KS and Rao, KBS and Mannan, SL and Sastry, DH (2001) An assessment of creep deformation and fracture behavior of 2.25Cr-1Mo. In: Metallurgical and Materials Transactions A, 32 (1). pp. 115-124.
Laha, K and Chandravathi, KS and Rao, Bhanu Sankara K and Mannan, SL and Sastry, DH (2001) An assessment of creep deformation and fracture behavior of 2.25Cr-1Mo similar and dissimilar weld joints. In: Metallurgical and Materials Transactions A, 32 (1). pp. 115-124.
Laha, K and Chandravathi, KS and Rao, KBS and Mannan, SL and Sastry, DH (1999) Tensile flow behaviour of 2.25Cr-1Mo ferritic steel base metal and simulated heat affected zone structures of 2.25Cr-1Mo weld joint. In: Zeitschrift für Metallkunde, 90 (6). 449-455 .
Srinivasan, VS and Valsan, M and Sandhya, R and Rao, Bhanu Sankara K and Mannan, SL and Sastry, DH (1999) High temperature time-dependent low cycle fatigue behaviour of a type 316L(N) stainless steel. In: International Journal of Fatigue, 21 (1). pp. 11-21.
Srinivasan, VS and Sandhya, R and Valsan, M and Rao, KBS and Mannan, SL and Sastry, DH (1997) The influence of dynamic strain ageing on stress response and strain-life relationship in low cycle fatigue of 316L(N) stainless steel. In: Scripta Materialia, 37 (10). pp. 1593-1598.
Venugopal, S and Mannan, SL and Prasad, YVRK (1997) Instability map for cold and warm working of as-cast 304 stainless steel. In: Journal of Materials Processing Technology, 65 (1-3). pp. 107-115.
Venugopal, S and Mannan, SL and Prasad, YVRK (1997) On the modelling of grain size during hot working of stainless steels type AISI 304 and 316. In: Journal of Materials Science Letters, 16 (2). pp. 137-142.
Venugopal, S and Vasudevan, M and Venugopal, Sridhar and Sivaprasad, PV and Jha, SK and Pandey, P and Mannan, SL and Prasad, YVRK (1996) Industrial validation of processing maps of 316L stainless steel using hot forging, rolling, and extrusion. In: Materials Science and Technology, 12 (11). pp. 955-962.
Venugopal, S and Venugopal, Sridhar and Sivaprasad, PV and Vasudevan, M and Mannan, SL and Jha, SK and Pandey, P and Prasad, YVRK (1996) Validation of processing maps for 304L stainless steel using hot forging, rolling and extrusion. In: Journal of Materials Processing Technology, 99 (04). pp. 343-350.
Venugopal, S and Mannan, SL and Prasad, YVRK (1996) Influence of strain rate and state-of-stress on the formation of ferrite in stainless steel type AISI 304 during hot working. In: Materials Letters, 26 (3). pp. 161-165.
Venugopal, S and Mannan, SL and Prasad, YVRK (1996) Optimization of cold and warm workability in 304 stainless steel using instability maps. In: Metallurgical and Materials Transactions A, 27 (1). pp. 119-126.
Venugopal, S and Tyagi, AK and Krishan, K and Mannan, SL and Prasad, YVRK (1995) Influence of carbide particles on the dynamic recrystallization of as-cast 304 stainless steel: a study using secondary ion mass spectrometric (SIMS) analysis. In: Materials Letters, 25 (5-6). pp. 245-248.
Venugopal, S and Mannan, SL and Prasad, YVRK (1995) Optimization of cold and warm workability in stainless steel type AISI 316L using instability maps. In: Journal of Nuclear Materials, 227 (1-2). pp. 1-10.
Venugopal, S and Ravishankar, C and Mannan, SL and Prasad, YVRK (1994) Comments on the paper entitled “Microstructural features of a type 304L stainless steel deformed at 1473 K in the strain rate interval 10−3 to 102 s−1”. In: Scripta Metallurgica et Materialia, 30 (12). 1611-1616 .
Venugopal, S and Ravishankar, C and Mannan, SL and Prasad, YVRK (1994) Microstructural features of a type 304L stainless steel deformed at 1473 K in the strain rate interval 10−3 to 102 s−1. In: Scripta Metallurgica et Materialia, 30 (12). 1611-1616 .
Valsan, M and Sastry, DH and Rao, KBS and Mannan, SL (1994) Effect of strain rate on the high-temperature low-cycle fatigue properties of a nimonic PE-16 superalloy. In: Metallurgical and materials transactions a, 25 (1). pp. 159-171.
Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Processing map for cold and hot working of as-cast stainless steel type AISI 304. In: Journal of Materials Science Letters, 12 (23). pp. 1875-1878.
Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Criteria for prediction of flow instabilities and microstructural manifestations during warm working of AISI 304L stainless steel. In: Materials Science and Technology, 9 (11). pp. 1021-1030.
Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Influence of cast versus wrought microstructure on the processing map for hot working of stainless steel type AISI 304. In: Materials Letters, 17 (6). pp. 388-392.
Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Processing map for hot working of stainless steel type AISI 316L. In: Materials Science and Technology, 9 (10). pp. 899-906.
Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Processing map for mechanical working of stainless steel type AISI 316 L. In: Scripta Metallurgica et Materialia, 28 (6). pp. 715-720.
Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Influence of state of stress on the processing map for hot working of stainless steel type AISI 304L: compression vs. torsion. In: Materials Science and Engineering: A, 160 (1). pp. 63-69.
Valsan, M and Parameswaran, P and Rao, Bhanu Sankara K and Vijayalakshmi, M and Shastry, DH and Mannan, SL (1992) High-temperature low-cycle fatigue behavior of a NIMONIC PE-16 superalloy—Correlation with deformation and fracture. In: Metallurgical Transactions. Physical Metallurgy and Material, 23 (6). pp. 1751-1761.
