|
 | Up a level |
Kailas, SV and Horng, JH and Suvin, PS (2023) Bio-based lubricants and their environmental sustainability. [Book Chapter]
Edachery, V and Ravi, S and Badiuddin, AF and Tomy, A and Suvin, PS and Kailas, SV (2023) Effect of Surface Topography and Roughness on the Wetting Characteristics of an Indigenously Developed Green Cutting Fluid (GCF). [Book Chapter]
Edachery, V and Pariyar, A and Muthukumar, M and Harsha, S and Likhitha, CS and Kailas, SV (2021) A Study on the Tribological Behavior of Al/B4C/Graphite Hybrid Composite Fabricated by Friction Stir Processing. [Book Chapter]
Srinivas, MS and Panneer, R and Suvin, PS and Kailas, SV (2021) Synthesis and Testing of Novel Neem Oil-Based Cutting Fluid with Ionic Liquid Additives. [Book Chapter]
Kumar, PA and Raj, R and Kailas, SV (2015) Polymer Derived In-Situ Nano Metal Matrix Composites Obtained by Friction Stir Processing. In: 30th Technical Conference of the American-Society-for-Composites, SEP 28-30, 2015, East Lansing, MI, pp. 2368-2382.
Mahesh, C and Deb, A and Kailas, SV and Shankar, Uma C and Kutty, TRG and Mahule, KN (2013) A STUDY INTO THE BEHAVIOR OF AN ALUMINUM FOAM UNDER COMPRESSION. In: 11th Asia-Pacific Conference on Engineering Plasticity and its Applications, DEC 05-07, 2012 , Singapore, SINGAPORE, pp. 64-67.
Kumar, V and Wani, MF and Mannekote, JK and Kailas, SV (2019) Tribological Properties of Some Fatty Acids. In: 2nd International Conference on New Frontiers in Engineering, Science and Technology, NFEST 2019, 18 - 22 February 2019, Kurukshetra, Haryana.
Ghosh, M and Kar, A and Kumar, K and Kailas, SV and Das, SK and Ray, AK (2008) Evaluation of interface microstructure for friction stir welding aluminium-stainless steel plate. In: The International Conference 'INCOME', Jamshedpur, December, Jamshedpur.
Gutta, B and Huilgol, P and Perugu, CS and Kumar, G and Reddy, ST and Toth, LS and Bouaziz, O and Kailas, SV (2024) A Polymer-Based Metallurgical Route to Produce Aluminum Metal-Matrix Composite with High Strength and Ductility. In: Materials, 17 (1).
Pariyar, A and John, A and Perugu, CS and Edachery, V and Kailas, SV (2023) Influence of laser beam welding parameters on the microstructure and mechanical behavior of Inconel X750 superalloy. In: Manufacturing Letters, 35 . pp. 33-38.
Pariyar, A and Perugu, CS and Abhishek, BM and Toth, LS and Kailas, SV (2023) In-situ polymer-derived SiOC strengthened aluminum sheets: Investigations on its manufacturing and structure-property correlations. In: Materialia, 30 .
Pariyar, A and Vu, VQ and Kailas, SV and Toth, LS (2023) Room-Temperature Single-Step Production of Ultrafine-Grained Bulk Metallic Sheets From Al Powder. In: Journal of Manufacturing Science and Engineering, 145 (10).
Divakaran, A and Likhar, PV and Kailas, SV (2023) Evaluation of Boundary Lubrication Properties of Fatty Acids Using a Lateral Force-Controlled Tribometer. In: Tribology Letters, 71 (3).
Kumar, S and Divakaran, A and Kailas, SV (2023) Fabrication and tribo characteristics of in-situ polymer-derived nano-ceramic composites of Al-Mg-Si alloy. In: Tribology International, 180 .
Likhar, PV and Divakaran, A and Kailas, SV (2022) An energy dissipation tribometer to evaluate friction in boundary lubrication regime. In: Tribology International, 171 .
Sharma, V and Gupta, RK and Kailas, SV and Basu, B (2022) Probing lubricated sliding wear properties of HDPE/UHMWPE hybrid bionanocomposite. In: Journal of Biomaterials Applications .
Edachery, V and Ravi, S and Badiuddin, AF and Tomy, A and Kailas, SV and Suvin, PS (2022) Wetting behaviour of a Green cutting fluid (GCF); influence of surface roughness and surface energy of AA5052, Ti6Al4V and EN31. In: Materials Today: Proceedings .
John, A and Edachery, V and Agilan, M and Rajendran, A and Mathiyalagan, S and Madhu, HC and Kailas, SV (2022) Influence of Sliding-Friction Induced Strain Hardening on the Tribological Behavior of Friction Stir Processed AA2219 Alloy. In: Tribology Online, 17 (1). pp. 9-18.
Edachery, V and Swamybabu, V and Gurupatham, A and Paramasamy, M and Kailas, SV (2022) The role of surface topography and normal load in the initiation of ratchetting-peak friction, seizure, scuffing, and elastic shakedown. In: Journal of Tribology, 144 (2).
Edachery, V and Swamybabu, V and Adarsh, D and Kailas, SV (2022) Influence of surface roughness frequencies and roughness parameters on lubricant wettability transitions in micro-nano scale hierarchical surfaces. In: Tribology International, 165 .
Karupannasamy, DK and Kailas, SV and Shankar, S and Sasikumar, KSK (2022) A Predictive Model for Galling Phenomenon and Its Applicability for Deep Drawing Processes. In: Journal of Tribology, 144 (1).
Rajendran, A and Hariharan, R and Kailas, SV (2022) Influence of complete tool-offset position on intrinsic microstructure and its effect on fatigue life of aa2024 alloy-copper joint made by friction stir welding. In: Materials Performance and Characterization, 11 (2).
Samudre, P and Kailas, SV (2022) Thermal performance enhancement in open-pore metal foam and foam-fin heat sinks for electronics cooling. In: Applied Thermal Engineering, 205 .
Pariyar, A and Perugu, CS and Toth, LS and Kailas, SV (2021) Microstructure and mechanical behavior of polymer-derived in-situ ceramic reinforced lightweight aluminum matrix composite. In: Journal of Alloys and Compounds, 880 .
Edachery, V and Shashank, R and Kailas, SV (2021) Influence of surface texture directionality and roughness on wettability, sliding angle, contact angle hysteresis, and lubricant entrapment capability. In: Tribology International, 158 .
Rajendran, A and Nadammal, N and Singh, K and Kailas, SV (2021) Effect of axial load-dependent deformation rate on the grain size distribution and mechanical properties of friction stir processed copper. In: Materials Performance and Characterization, 10 (2).
Edachery, V and John, A and Rajendran, A and Srinivasappa, V and Mathiyalagan, S and Kumar, S and Kailas, SV (2021) Enhancing tribological properties of Inconel X-750 superalloy through surface topography modification by shot blasting. In: Materials Performance and Characterization, 10 (2).
Malik, V and Kailas, SV (2021) Understanding the effect of tool geometrical aspects on intensity of mixing and void formation in friction stir process. In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235 (4). pp. 744-757.
Pariyar, A and Toth, LS and Kailas, SV and Peltier, L (2021) Imparting high-temperature grain stability to an Al-Mg alloy. In: Scripta Materialia, 190 . pp. 141-146.
Pariyar, A and Perugu, CS and Dash, K and Kailas, SV (2021) Microstructure and mechanical behavior of high toughness Al-based metal matrix composite reinforced with in-situ formed nickel aluminides. In: Materials Characterization, 171 .
Rokkala, U and Bontha, S and Ramesh, MR and Balla, VK and Srinivasan, A and Kailas, SV (2021) Tailoring surface characteristics of bioabsorbable Mg-Zn-Dy alloy using friction stir processing for improved wettability and degradation behavior. In: Journal of Materials Research and Technology, 12 . pp. 1530-1542.
Pariyar, A and Edachery, V and John, A and Kailas, SV (2021) A comparative tribological study of Inconel X750 under surface hardened and non-hardened conditions. In: Surface Topography: Metrology and Properties, 9 (3).
Suvin, PS and Gupta, P and Horng, J-H and Kailas, SV (2020) Evaluation of a comprehensive non-toxic, biodegradable and sustainable cutting fluid developed from coconut oil. In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology . (In Press)
J, AR and Kailas, SV (2020) Evolution of wear debris morphology during dry sliding of Ti�6Al�4V against SS316L under ambient and vacuum conditions. In: Wear, 456-57 .
Madhu, HC and Edachery, V and Lijesh, KP and Perugu, CS and Kailas, SV (2020) Fabrication of Wear-Resistant Ti3AlC2/Al3Ti Hybrid Aluminum Composites by Friction Stir Processing. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (8). pp. 4086-4099.
Abolusoro, OP and Akinlabi, ET and Kailas, SV (2020) Impact of tool profile on mechanical behavior and material flow in friction stir welding of dissimilar aluminum alloys Einfluss des Werkzeugprofils auf mechanisches Verhalten und Materialfluss beim Rührreibschwei�en unterschiedlicher Aluminiumlegierungen. In: Materialwissenschaft und Werkstofftechnik, 51 (6). pp. 725-731.
Kar, A and Yadav, D and Suwas, S and Kailas, SV (2020) Role of plastic deformation mechanisms during the microstructural evolution and intermetallics formation in dissimilar friction stir weld. In: Materials Characterization, 164 .
Abolusoro, OP and Akinlabi, ET and Kailas, SV (2020) Tool rotational speed impact on temperature variations, mechanical properties and microstructure of friction stir welding of dissimilar high-strength aluminium alloys. In: Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42 (4).
Kar, A and Kailas, SV and Suwas, S (2020) Mechanism of variation in high-temperature grain stability of aluminum in dissimilar friction stir welds. In: Materials Performance and Characterization, 9 (2).
Kar, A and Kailas, SV and Suwas, S (2020) Formation sequence of intermetallics and kinetics of reaction layer growth during solid state reaction between titanium and aluminum. In: Materialia, 11 (100702).
Somarajan, SP and Horng, JH and Kailas, SV (2019) Development and testing of a modular lathe tribometer tool to evaluate the lubricity aspect of cutting fluids on freshly cut surfaces. In: Tribology Online, 14 (5). pp. 417-421.
Kar, A and Kailas, SV and Suwas, S (2019) Effect of Mechanical Mixing in Dissimilar Friction Stir Welding of Aluminum to Titanium with Zinc Interlayer. In: Transactions of the Indian Institute of Metals .
Somarajan, SP and Kailas, SV (2018) Study and comparison of lubricity of green and commercial cutting fluid using tool-chip tribometer. In: Tribology Online, 13 (6). pp. 340-350.
Malik, V and Kailas, SV (2018) Plasticine modeling of material mixing in friction stir welding. In: Journal of Materials Processing Technology, 258 . pp. 80-88.
Azeez, ST and Akinlabi, ET and Kailas, SV and Brandi, SD (2018) Microstructural properties of a dissimilar friction stir welded thick aluminum aa6082-t6 and aa7075-t6 alloy. In: MATERIALS TODAY-PROCEEDINGS, 5 (9, 3). pp. 18297-18306.
Venukumar, S and Yalagi, SG and Muthukumaran, S and Kailas, SV (2014) Static shear strength and fatigue life of refill friction stir spot welded AA 6061-T6 sheets. In: SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 19 (3). pp. 214-223.
Ghosh, M and Husain, Md M and Kumar, K and Kailas, SV (2013) Friction Stir-Welded Dissimilar Aluminum Alloys: Microstructure, Mechanical Properties, and Physical State. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 22 (12). pp. 3890-3901.
Ghosh, M and Kar, A and Kumar, K and Kailas, SV (2012) Structural characterisation of reaction zone for friction stir welded aluminium-stainless steel joint. In: Materials Technology, 27 (2). pp. 169-172.
Ghosh, M and Kumar, K and Kailas, SV and Raychaudhuri, AK (2010) Optimization of friction stir welding parameters for dissimilar aluminum alloys. In: Materials & Design, 31 (6). pp. 3033-3037.
Kumar, K and Kailas, SV (2010) Positional dependence of material flow in friction stir welding: analysis of joint line remnant and its relevance to dissimilar metal welding. In: Science and Technology of Welding & Joining, 15 (4). pp. 305-311.
Narasimha, Roddam and Kumar, Rudra S and Prabhu, A and Kailas, SV (2007) Turbulent flux events in a nearly neutral atmospheric boundary layer. In: Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 365 (1852). pp. 841-858.
Jayalakshmi, S and Kailas, SV and Seshan, S and Kim, KB and Fleury, E (2006) Tensile strength and fracture toughness of two magnesium metal matrix composites. In: Journal of Ceramic Processing Research, 7 (3). pp. 261-265.
Jayamathy, M and Kailas, SV and Kumar, K and Seshan, S and Srivatsan, TS (2005) The compressive deformation and impact response of a magnesium alloy: influence of reinforcement. In: Materials Science & Engineering, A, 393 (1-2). pp. 27-35.
Jayalakshmi, S and Kailas, SV and Seshan, S and Kumar, K and Srivatsan, TS (2005) Damage Tolerant Magnesium Metal Matrix Composites: Influence of Reinforcement and Processing. In: Materials and Manufacturing Processes, 20 (5). pp. 747-760.
Jayamathy, M and Seshan, S and Kailas, SV and Kumar, K and Srivatsan, TS (2005) Influence of Reinforcement and Processing on the Wear Response of Two Magnesium Alloys. In: Materials and Manufacturing Processes, 20 (2). pp. 255-271.
Jayamathy, M and Seshan, S and Kailas, SV and Kumar, K and Srivatsan, TS (2004) Influence of reinforcement on microstructure and mechanical response of a magnesium alloy. In: Current Science, 87 (9). pp. 1218-1231.
Jayalakshmi, S and Seshan, S and Kailas, SV and Kumar, K and Srivatsan, S (2004) Influence of processing and reinforcement on microstructure and impact behavior of magnesium alloy AM100. In: Sadhana, 29 (5). pp. 509-523.
Kailas, SV (2003) A Study of the Strain Rate Microstructural Response and Wear of Metals. In: Journal of Materials Engineering and Performance, 12 (6). pp. 629-637.
Seshan, S and Jayamathy, M and Kailas, SV and Srivatsan, TS (2003) The tensile behavior of two magnesium alloys reinforced with silicon carbide particulates. In: Materials Science and Engineering A, 363 (1-2). pp. 345-351.
Jayalakshmi, S and Kailas, SV and Seshan, S (2003) Properties of squeeze cast Mg-10Al-Mn alloy and its alumina short fibre composites. In: Journal of Materials Science, 38 (7). pp. 1383-1389.
Jayalakshmi, S and Kailas, SV and Seshan, S (2002) Tensile behaviour of squeeze cast AM100 magnesium alloy and its $Al_2O_3$ fibre reinforced composites. In: Composites Part A: Applied Science and Manufacturing, 33 (8). pp. 1135-1140.
Kailas, SV and Biswas, SK (1999) Sliding wear of copper against alumina. In: Journal of Tribology, 121 (4). 795-801 .
Kailas, SV and Biswas, SK (1997) Sliding wear of titanium. In: Transactions of the ASME: Journal of Tribology, 119 (1). pp. 31-35.
Kailas, SV and Prasad, YVRK and Biswas, SK (1994) Flow Instabilities and fracture in Ti-6Al-4V deformed in compression at 298 K to 673 K. In: Metallurgical and materials transactions a, 25 (10). 2173-2179 .
Kailas, SV and Prasad, YVRK and Biswas, SK (1994) Influence of initial texture on the microstructural instabilities during compression of commercial ?-Titanium at 25 °C to 400 °C. In: Metallurgical and Materials Transactions A, 25 (7). 1425 -1434 .
Kailas, SV and Prasad, YVRK and Biswas, SK (1993) Microstructural features of flow instability in α-titanium cylinders under high strain rate compression at 25°C to 400°C. In: Metallurgical Transactions. Physical Metallurgy and Material, 24 (11). pp. 2513-2520.
Narasimha, R and Kailas, SV (1990) Turbulent bursts in the atmosphere. In: Atmospheric Environment, 24 (7). pp. 1635-1645.
