|
 | Up a level |
Gururaja, S and Manoharan, N and Pothnis, J and Chandra, A (2023) Open Hole Fatigue Testing of CNT Infused GFRP Multi-scale Composite Laminates Using Infrared Thermography. In: SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 2022, 13 - 16 June 2022, Pittsburgh, 19 – 23.
Shetty, K and Manjunatha, CM and Gururaja, S and Srihari, S (2022) Hot-Wet Environmental Effects on In-Plane Shear Strength of IMA/M21E Aircraft Grade CFRP Composites. In: 3rd Structural Integrity Conference and Exhibition, SICE 2020, 11-13 December 2020, IIT Bombay, pp. 285-292.
Krishnappa, S and Gururaja, S (2022) Effect of Fiber Misalignment on Transverse Behaviour of Uni-Directional Fiber Reinforced Plastics: A Micromechanical study. In: AIAA Science and Technology Forum and Exposition, 3-7 Jan 2022, San Diego.
Ramesh, S and Kubher, S and Gururaja, S (2020) Drilling induced exit-ply delamination model considering torque. In: 18th European Conference on Composite Materials, ECCM 2018, 24-28 June 2018, (MAICC)Athens; Greece.
Krishnappa, S and Gururaja, S (2020) A numerical study on micromechanics of kink band formation. In: AIAA Scitech 2020 Forum, 6 - 10 January 2020, Orlando, pp. 1-10.
Pothnis, JR and Kalyanasundaram, D and Gururaja, S (2020) Electric field enabled manipulation of CNT alignment in epoxy matrix: Methodology and mechanical characterization. In: 18th European Conference on Composite Materials, ECCM 2018; Megaron Athens International Conference Centre (MAICC)Athens; Greece; 24 June 2018 through 28 June 2018; Code 155810, 24-28 June 2018, Centre (MAICC)Athens; Greece.
Gururaja, S and Nagaraja, A (2019) Effect of microporosity on damage initiation in ceramic matrix composites. In: ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, GT 2019, 17 - 21 June 2019, Phoenix.
Jagannathan, N and Gururaja, S and Manjunatha, CM (2019) Matrix cracking in polymer matrix composites under bi-axial loading. In: 2nd International Conference on Structural Integrity and Exhibition, SICE 2018, 25 - 27 July 2018, Hyderabad, pp. 864-871.
Nagaraja, AM and Gururaja, S (2019) Effective property estimation of cmc minicomposites considering porosity. In: ASME 2018 International Mechanical Engineering Congress and Exposition, IMECE 2018, 9 - 15 November 2018, Pittsburgh.
Pothnis, JR and Kalyanasundaram, D and Gururaja, S (2019) Numerical and experimental studies on the development of variable density nanocomposites for structural applications. In: ASME 2018 International Mechanical Engineering Congress and Exposition, IMECE 2018, 9 - 15 November 2018, Pittsburgh.
Adhikari, D and Gururaja, S (2019) Permeability characterization of porouspreform during VARTM using fractals. In: 18th European Conference on Composite Materials, ECCM 2018; Megaron Athens International Conference, 24-28th June 2018, Athens, Greece.
Nagaraja, AM and Udayakumar, A and Gururaja, S (2017) Consituent property evaluation of ceramic matrix composites by nanoindentation. In: 14th International Conference on Fracture, ICF 2017, 18 - 20 June 2017, Rhodes, pp. 145-146.
Kubher, S and Gururaja, S (2017) Damage development in CFRPs during orthogonal cutting considering temperature effects. In: 14th International Conference on Fracture, ICF 2017, 18 - 20 June 2017, Rhodes, pp. 735-736.
Nagaraja, AM and Kishore, S and Udayakumar, A and Gururaja, S (2017) Statistical strength distribution in CVI processed ceramic matrix composite with boron nitride interphase. In: 14th International Conference on Fracture, ICF 2017, 18 - 20 June 2017, Rhodes, pp. 874-875.
Parambil, NK and Gururaja, S (2017) Stochastic fiber fragmentation in UD-FRPs under longitudinal loading - A micromechanical analysis. In: 14th International Conference on Fracture, ICF 2017, 18 - 20 June 2017, Rhodes, pp. 797-798.
Parambil, NK and Gururaja, S (2017) Multiscale damage development in polymer composite laminates. In: 58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 9-13, January 2017, United States.
Pothnis, JR and Hajagolkar, AK and Anilchandra, AR and Das, R and Gururaja, S (2023) Open-hole fatigue testing of UD-GFRP composite laminates containing aligned CNTs using infrared thermography. In: Composite Structures, 324 .
Nagaraja, AM and Gururaja, S (2023) A progressive damage model for ceramic matrix mini-composites with thick interphases. In: Journal of the European Ceramic Society, 43 (10). pp. 4336-4348.
Adhikari, D and Gururaja, S and Hemchandra, S and KoÄ�Ã, J (2022) Resin infusion in porous preform in the presence of HPM considering complex geometry and gravity: Flow simulation and experimental validation. In: Journal of Reinforced Plastics and Composites .
Mahto, B and Kubher, S and Gururaja, S (2022) Characterization of cure residual strain development and associated structural distortion in carbon fiber polymer matrix composites. In: Journal of Composite Materials .
Nagaraja, AM and Gururaja, S and Udayakumar, A (2022) Tensile behavior of ceramic matrix minicomposites with engineered interphases fabricated by chemical vapor infiltration. In: Journal of the European Ceramic Society, 42 (6). pp. 2659-2671.
Kubher, S and Gururaja, S and Zitoune, R (2022) Coupled thermo-mechanical modeling of drilling of multi-directional polymer matrix composite laminates. In: Composites Part A: Applied Science and Manufacturing, 156 .
Pothnis, JR and Kalyanasundaram, D and Gururaja, S (2021) Enhancement of open hole tensile strength via alignment of carbon nanotubes infused in glass fiber - epoxy - CNT multi-scale composites. In: Composites Part A: Applied Science and Manufacturing, 140 .
Adhikari, D and Gururaja, S and Hemchandra, S (2021) Resin infusion in porous preform in the presence of HPM during VARTM: Flow simulation using level set and experimental validation. In: Composites Part A: Applied Science and Manufacturing, 151 .
Bonthu, D and Bharath, HS and Gururaja, S and Prabhakar, P and Doddamani, M (2020) 3D printing of syntactic foam cored sandwich composite. In: Composites Part C: Open Access, 3 .
Kumar, D and Gururaja, S and Jawahir, IS (2020) Machinability and surface integrity of adhesively bonded Ti/CFRP/Ti hybrid composite laminates under dry and cryogenic conditions. In: Journal of Manufacturing Processes, 58 . pp. 1075-1087.
Kumar, D and Gururaja, S (2020) Machining damage and surface integrity evaluation during milling of UD-CFRP laminates: Dry vs. cryogenic. In: Composite Structures, 247 .
Adhikari, D and Gururaja, S and Hemchandra, S (2020) Vacuum infusion in porous preform with different mould configurations: Flow simulation and experimental validation. In: Journal of Reinforced Plastics and Composites . (In Press)
Kumar, D and Gururaja, S (2020) Investigation of hole quality in drilled Ti/CFRP/Ti laminates using CO2 laser. In: Optics and Laser Technology, 126 .
Pothnis, JR and Kalyanasundaram, D and Gururaja, S (2020) Controlled manipulation of CNTs in glass/epoxy composites with cut-outs using non-uniform electric field. In: Advanced Composite Materials .
Pothnis, J R and Sridevi, M and Supreeth, M K and Anilchandra, A R and Hegde, G and Gururaja, S (2019) Enhanced tensile properties of novel bio-waste synthesized carbon particle reinforced composites. In: MATERIALS LETTERS, 251 . pp. 110-113.
Kubher, S and Gururaja, S and Zitoune, R (2019) Numerical Modeling of Exit-Ply Delamination During Drilling of CFRPs Considering Thermal Effects. In: International Journal for Computational Methods in Engineering Science and Mechanics, 19 (6). pp. 383-389.
Kubher, S and Gururaja, S and Zitoune, R (2019) Numerical Modeling of Exit-Ply Delamination During Drilling of CFRPs Considering Thermal Effects. In: International Journal for Computational Methods in Engineering Science and Mechanics, 19 (6). pp. 383-389.
Jagannathan, N and Gururaja, S and Manjunatha, CM (2018) Probabilistic strength based matrix crack evolution model in multidirectional composite laminates under fatigue loading. In: INTERNATIONAL JOURNAL OF FATIGUE, 117 . pp. 135-147.
Jagannathan, N and Gururaja, S and Manjunatha, CM (2018) Matrix crack evolution in multi-directional composite laminates considering thickness effects. In: ADVANCED COMPOSITE MATERIALS, 27 (6). pp. 541-559.
Grama, SN and Nagaraja, AM and Gururaja, S and Mohan, RV (2018) Effect of process induced variations on machining characteristics of a model epoxy resin system. In: Machining Science and Technology, 22 (5). pp. 811-828.
Arabatti, T and Parambil, NK and Gururaja, S (2016) MICROMECHANICAL MODELING OF DAMAGE DEVELOPMENT IN POLYMER COMPOSITES. In: ADVANCED COMPOSITES LETTERS, 25 (3). pp. 56-62.
Jagannathan, N and Gururaja, S and Manjunatha, CM (2016) Probabilistic strength based matrix crack evolution in multi-directional composite laminates. In: COMPOSITES PART B-ENGINEERING, 87 . pp. 263-273.
Arulappan, C and Duraisamy, A and Adhikari, D and Gururaja, S (2015) Investigations on pressure and thickness profiles in carbon fiber-reinforced polymers during vacuum assisted resin transfer molding. In: JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 34 (1). pp. 3-18.
Kim, D and Kim, YH and Gururaja, S and Ramulu, M (2010) Processing and fiber content effects on the machinability of compression moulded random direction short GFRP composites. In: International Journal of Automotive Technology, 11 (6). pp. 849-855.
