Up a level |
Mitra, S and Dutta, P and Saha, BB (2023) Scaling of heat and mass transfer processes in adsorption column. [Book Chapter]
Ginley, D and Aswathi, R and Atchuta, SR and Basu, B and Basu, S and Christian, JM and Dan, A and Dani, N and Das, R N and Dutta, P and Flueckiger, SM and Garimella, SV and Goswami, Y and Ho, CK and Kedare, S and Khivsara, SD and Kumar, P and Madhusoodana, CD and Mallikarjun, B and Mira-Hernández, C and Orosz, M and Ortega, JD and Parida, DR and Prasad, MS and Ramesh, K and Advaith, S and Saha, SK and Sakthivel, S and Sharma, S and Singh, P and Singh, S and Srikanth, O and Srinivasan, V and Weibel, JA and Wendelin, T (2020) Multiscale Concentrated Solar Power. [Book Chapter]
Garg, P and Srinivasan, K and Dutta, P and Kumar, P (2014) Comparison of CO2 and steam in transcritical Rankine cycles for concentrated solar power. In: International Conference of the SolarPACES, SEP 17-20, 2013, Las Vegas, NE, pp. 1138-1146.
Mitra, S and Srinivasan, K and Kumar, P and Murthy, SS and Dutta, P (2014) Solar driven Adsorption Desalination system. In: International Conference of the SolarPACES, SEP 17-20, 2013, Las Vegas, NE, pp. 2261-2269.
Chakraborty, S and Dutta, P and Roychowdhury, S and Mukherjee, A (2022) CRUSH: Contextually Regularized and User anchored Self-supervised Hate speech Detection. In: 2022 Findings of the Association for Computational Linguistics: NAACL 2022, 10 - 15 July 2022, Seattle, pp. 1874-1886.
Kumar, J and Dutta, P and Das, S and Roy, N (2020) Instrumental Calibration for Observations of Redshifted 21-cm Signal from Neutral Hydrogen. In: 2020 URSI Regional Conference on Radio Science, URSI-RCRS 2020, 12-14 February 2020, Varanasi; India.
Wani, S and Srinivasan, K and Dutta, P (2019) EVALUATION OF FLAT PLATE SOLAR COLLECTOR WITH INTEGRAL FIN EXTRUDED ALUMINIUM TUBES. In: UNSPECIFIED.
Ginley, DS and Tumas, W and Howe, MM and Dutta, P and Ho, CK and Vasi, JM and Van Hest, MFAM and Curtright, AE and Kumar, P and Chattopadhyay, K (2018) Solar Energy Research Institute for India and the United States (SERIIUS): A Focused Solar Consortium. In: 7th IEEE World Conference on Photovoltaic Energy Conversion, WCPEC 2018, 10 - 15 June 2018, Waikoloa Village, pp. 2488-2491.
Khivsara, S and Dutta, P and Ortega, J and Christian, J and Ho, C (2018) Computational modeling of a high temperature bladed solar receiver with air as the heat transfer fluid. In: 5th International Conference on Computational Methods for Thermal Problems, THERMACOMP 2018, 9 - 11 July 2018, Bengaluru, pp. 675-679.
Dash, A and Garg, P and Dutta, P (2018) Design and analysis of scroll expander using Ns-Ds diagram. In: 5th International Conference on Computational Methods for Thermal Problems, THERMACOMP 2018, 9 - 11 July 2018, Bengaluru, pp. 185-188.
Sasidharan, S and Dutta, P (2018) Numerical analysis of pressurized cavity-airreceiver in concentrating solar power system. In: 5th International Conference on Computational Methods for Thermal Problems, THERMACOMP 2018, 9 - 11 July 2018, Bengaluru, pp. 747-751.
Das, P and Dutta, P (2018) Multi phase model of semi solid slurry generation during cooling slope processing of melt treated AL- 7SI-0.3 MG alloy. In: 5th International Conference on Computational Methods for Thermal Problems, THERMACOMP 2018, 9 - 11 July 2018, Bengaluru, pp. 600-603.
Samanta, SK and Chattopadhyay, H and Dutta, P and Barman, N and Das, Prosenjit (2012) Rheological characterization of semi-solid A356 aluminium alloy. In: 12th International Conference on Semi-Solid Processing of Alloys and Composites, 8-11 October, 2012, Cape Town, South Africa.
Tveito, KO and Bedel, M and Zaloznik, M and Combeau, H and Hamdi, MM and Kumar, A and Dutta, P (2012) Numerical study of the impact of inoculant and grain transport on macrosegregation and microstructure formation during solidification of an Al-22%Cu alloy. In: IOP Conference Series: Materials Science and Engineering, 2012.
Saha, SK and Dutta, P (2010) Heat transfer correlations for PCM-based heat sinks with plate fins. In: 12th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, MAY 10-13, 2009 , Rome, pp. 2485-2491.
Dutta, P and Kumar, A (2009) Influence of Solid Phase Movement and Melt Convection on Macrosegregation and Microstructure Formation. In: 4th International Conference on Solidification Science and Processing , November 20-23, 2009.
Kumar, P and Lakshmi, H and Dutta, P (2009) Determination of solid fraction evolution during solidification of aluminum alloy in presence of linear electromagnetic stirring. In: International Mechanical Engineering Congress & Exposition, November 13-19, 2009, Lake Buena Vista, Florida, USA.
Dutta, P and Murthy, KSS (2009) Semisolid Manufacturing. In: 57th Indian Foundry Congress, Feb. 13-15, 2009, Kolkata.
Barman, N and Mukherjee, J and Dutta, P (2008) Numerical Simulation of Induction Heating of Aluminum Alloy Billets. In: 10th International Conference on Semi-Solid Processing of Alloys and Composites, September 16th -18th, 2008., Aachen, Germany, pp. 133-138.
Saha, SK and Murthy, BB and Dutta, P (2008) Cooling of Electronics using Phase Change Materials under Cyclic Loading. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.
Chakraborty, P and Kumar, A and Dutta, P (2008) Experimental and Numerical studies on Settling of Solid Crystals during Freezing of Aqueous Ammonium Chloride Solution. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.
Kumar, A and Dutta, P (2008) Numerical Analysis of Columnar-to-Equiaxed Transition in Directionally Solidified Sn-Pb and Al-Cu Alloys. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.
Kumar, P and Lakshmi, H and Dutta, P (2008) Rheocasting of A356 Alloy using Linear electromagnetic Stirring. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.
Barman, N and Dutta, P (2008) Rheological Behavior of Semi-solid Slurry of A356 Alloy at High Shear and Cooling Rates. In: 10th International Conference on Semi-Solid Processing of Alloys and Composites, September 16th -18th, 2008., Aachen, Germany, pp. 409-414.
Pardeshi, R and Singh, AK and Dutta, P (2008) Simulations of sedimentation in alloy solidification using a continuum model. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.
Kumar, P and Lakshmi, H and Dutta, P (2008) Solidification of A356 Alloy in a Linear Electromagnetic Stirrer. In: 10th International Conference on Semi-Solid Processing of Alloys and Composites, September 16th -18th, 2008., Aachen and Germany, pp. 563-568.
Barman, N and Kumar, P and Dutta, P (2008) Studies on Transport Phenomena in Rheocasting of Al-Si alloy in Presence of Electromagnetic Stirring. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.
Kumar, A and Dutta, P (2008) Transport of Solid Crystals during Solidification of Ternary Alloys. In: 8th ASME/ISHMT Heat and Mass Transfer Conference, JNTU, Hyderabad , Hyderabad.
Kumar, P and Lakshmi, H and Dutta, P (2007) Rheocasting of aluminium A356 alloy in a linear electromagnetic stirrer. In: The 6th Pacific Rim International Conference on Advanced Materials and Processing, , Nov. 5-9, 2007, Jeju Island, Korea.
Dutta, P and Murthy, KSS and Kumar, P (2007) Squeeze Casting and Semi-solid Forming: New Developments. In: International Conference on Aluminium (INCAL), , Nov. 21-23, 2007, Hyderabad.
Saha, S and Srinivasan, K and Dutta, P and Nayak, KC (2006) Cooling of Electronics using Phase Change Materials and Thermal Conductivity Enhancers. In: 7th ASME/ISHMT Heat and Mass Transfer Conference, Jan 4-6 2006, IIT Guwahati.
Pal, D and Chakraborty, S and Dutta, P and Bhattachary, J (2006) An Enthalpy-Based Micro-scale Model for Dendritic Solidification. In: 7th ASME/ISHMT Heat and Mass Transfer Conference, Jan 4-6 2006, IIT Guwahati.
Dutta, P (2006) Modelling of Transport Phenomena in Dissimilar Welding of Aluminium Alloys. In: 8th International Seminar Numerical Analyses of Weldability, 25-27 Sep 2006, Seggau Graz Austria.
Jain, J and Dutta, P and Kumar, A (2006) Numerical simulation of Freckles Formation during Directional Solidification of Aqueous Ammonium Chloride. In: 7th ASME/ISHMT Heat and Mass Transfer Conference, Jan 4-6 2006, IIT Guwahati.
Dutta, P (2006) Transport Phenomena in Laser Surface Alloying. In: Invited Keynote Lecture, Seminar on Application of Laser in Materials Processing, Feb 2-3 2006, Jadavpur University, Kolkata.
Kumar, A and Dutta, P (2006) Transport of Solid Crystals during Solidification of a Binary Alloy. In: International Conference on Advances in Materials and Materials Processing, Feb 4-5 2006, IIT Kharagpur.
Malleswararao, K and Kumar, P and Dutta, P and Srinivasa Murthy, S (2024) Experimental investigations on a coupled metal hydride based thermal energy storage system. In: International Journal of Hydrogen Energy, 56 . pp. 1371-1383.
Nandakumar, M and Dutta, P (2023) Large-scale turbulence cascade in the spiral galaxy NGC 6946. In: Monthly Notices of the Royal Astronomical Society, 526 (3). pp. 4690-4697.
Elahi, KMA and Bharadwaj, S and Pal, S and Ghosh, A and Ali, SS and Choudhuri, S and Chakraborty, A and Datta, A and Roy, N and Choudhury, M and Dutta, P (2023) Towards 21-cm intensity mapping at z = 2.28 with uGMRT using the tapered gridded estimator - III. Foreground removal. In: Monthly Notices of the Royal Astronomical Society, 525 (3). pp. 3439-3454.
Madhuri, MR and Srinivasan, K and Dutta, P (2023) Performance evaluation of a two-stage air-cooled silica gel + water adsorption cooling system: Effect of key operational parameters. In: Applied Thermal Engineering, 232 .
Malleswararao, K and Kumar, P and Dutta, P and Srinivasa Murthy, S (2023) Experimental studies on LaNi4.25Al0.75 alloy for hydrogen and thermal energy storage applications. In: International Journal of Hydrogen Energy .
Hoque, SJ and Kumar, P and Dutta, P (2023) Concentrating solar powered transcritical co2 power generation cycle for the union territory of ladakh, india. In: International Journal of Energy for a Clean Environment, 24 (4). 17- 40.
Chate, A and Dutta, P and Murthy, S (2023) Performance analysis of a thermochemical energy storage system for battery preheating in electric vehicles. In: Applied Thermal Engineering, 219 .
Elahi, KhMA and Bharadwaj, S and Ghosh, A and Pal, S and Ali, SkS and Choudhuri, S and Chakraborty, A and Datta, A and Roy, N and Choudhury, M and Dutta, P (2023) Towards 21-cm intensity mapping at z = 2.28 with uGMRT using the tapered gridded estimator - II. Cross-polarization power spectrum. In: Monthly Notices of the Royal Astronomical Society, 520 (2). pp. 2094-2108.
Dokara, R and Roy, N and Menten, K and Vig, S and Dutta, P and Beuther, H and Pandian, JD and Rugel, M and Rashid, M and Brunthaler, A (2023) Metrewave Galactic Plane with the uGMRT (MeGaPluG) Survey: Lessons from the pilot study. In: Astronomy and Astrophysics, 678 .
Rai, A and Yelamanchi, SD and Radotra, BD and Gupta, SK and Mukherjee, KK and Tripathi, M and Chhabra, R and Ahuja, CK and Kumar, N and Pandey, A and Korbonits, M and Dutta, P and Gaston-Massuet, C (2022) Phosphorylation of β-catenin at Serine552 correlates with invasion and recurrence of non-functioning pituitary neuroendocrine tumours. In: Acta Neuropathologica Communications, 10 (1).
Dutta, R and Kurapati, S and Aditya, JNHS and Bait, O and Das, M and Dutta, P and Indulekha, K and Nandakumar, M and Patra, NN and Roy, N and Roychowdhury, S (2022) Probing galaxy evolution through Hi 21-cm emission and absorption: current status and prospects with square kilometre array. In: Journal of Astrophysics and Astronomy, 43 (2).
Sharma, R and Srinivasa Murthy, S and Dutta, P and Rao, BS (2022) Performance of solid state hydrogen storage assisted standalone polygeneration microgrids for various climatic zones of India. In: Energy, 258 .
Chate, A and Sharma, R and S, SM and Dutta, P (2022) Studies on a potassium carbonate salt hydrate based thermochemical energy storage system. In: Energy, 258 .
Malleswararao, K and Dutta, P and Murthy S, S (2022) Applications of metal hydride based thermal systems: A review. In: Applied Thermal Engineering, 215 .
Sasidharan, S and Dutta, P (2022) Numerical and experimental studies on a pressurized hybrid tubular and cavity solar air receiver using a Scheffler reflector. In: Applied Thermal Engineering, 214 .
Pathak, R and Dutta, P and Srivastava, A and Rawat, D and Gopal, RK and Singh, AK and Soni, A and Biswas, K (2022) Strong Anharmonicity-Induced Low Thermal Conductivity and High n-type Mobility in the Topological Insulator Bi1.1Sb0.9Te2S. In: Angewandte Chemie - International Edition .
Sasidharan, S and Dutta, P (2022) Studies on thermal energy storage system with ceramic honeycomb channels. In: Journal of Energy Storage, 52 .
Kumar, J and Dutta, P and Choudhuri, S and Roy, N (2022) Calibration requirements for Epoch of Reionization 21-cm signal observations - II. Analytical estimation of the bias and variance with time-correlated residual gains. In: Monthly Notices of the Royal Astronomical Society, 512 (1). pp. 186-198.
Malleswararao, K and Aswin, N and Kumar, P and Dutta, P and Srinivasa Murthy, S (2022) Experiments on a novel metal hydride cartridge for hydrogen storage and low temperature thermal storage. In: International Journal of Hydrogen Energy, 47 (36). pp. 16144-16155.
Kumar, S and Sharma, R and Srinivasa Murthy, S and Dutta, P and He, W and Wang, J (2022) Thermal analysis and optimization of stand-alone microgrids with metal hydride based hydrogen storage. In: Sustainable Energy Technologies and Assessments, 52 .
Madhav, HV and Raghavendra, V and Kumar, P and Ambirajan, A and Dutta, P (2021) Development of a Canister Module for PCM Coupled Heat Pipe in Spacecraft Thermal Management. In: IEEE Transactions on Components, Packaging and Manufacturing Technology, 11 (11). pp. 1804-1815.
Sasidharan, S and Dutta, P (2021) Optical characterization of a fixed focus Scheffler reflector for pressurized solar receiver testing. In: Solar Energy, 227 . pp. 89-100.
Kumar, S and Dutta, P and Srinivasa Murthy, S and Aristov, YI and Gordeeva, L and Li, TX and Wang, RZ (2021) Studies on a metal hydride based year-round comfort heating and cooling system for extreme climates. In: Energy and Buildings, 244 .
Yan, T and Li, T and Xu, J and Chao, J and Wang, R and Aristov, YI and Gordeeva, LG and Dutta, P and Murthy, SS (2021) Ultrahigh-Energy-Density Sorption Thermal Battery Enabled by Graphene Aerogel-Based Composite Sorbents for Thermal Energy Harvesting from Air. In: ACS Energy Letters, 6 (5). pp. 1795-1802.
Yadav, R and Bhattacharyya, B and Saha, SK and Dutta, P and Roy, P and Rajasekar, GP and Narayan, A and Pandey, A (2021) Electronic Structure Insights into the Tunable Luminescence of CuAlxFe1- xS2/ZnS Nanocrystals. In: Journal of Physical Chemistry C .
Chakraborty, A and Datta, A and Roy, N and Bharadwaj, S and Choudhury, TR and Datta, KK and Pal, S and Choudhury, M and Choudhuri, S and Dutta, P and Sarkar, D (2021) First multi-redshift limits on post-epoch of reionization 21cm signal from z = 1.96-3.58 Using uGMRT. In: Astrophysical Journal Letters, 907 (1).
Sharma, R and Anil Kumar, E and Dutta, P and Srinivasa Murthy, S and Aristov, YI and Tokrev, MM and Li, TX and Wang, RZ (2021) Ammoniated salt based solid sorption thermal batteries: A comparative study. In: Applied Thermal Engineering, 191 .
Sasidharan, S and Dutta, P (2020) Numerical analysis of a hybrid tubular and cavity air receiver for solar thermal applications. In: International Journal of Numerical Methods for Heat and Fluid Flow . (In Press)
Das, P and Dutta, P (2020) Three-dimensional phase field simulation of spheroidal grain formation during semi solid processing of Al-7Si-0.3 Mg alloy. In: Computational Materials Science, 184 .
Srinivasa Murthy, S and Dutta, P and Sharma, R and Rao, BS (2020) Parametric studies on a stand-alone polygeneration microgrid with battery storage. In: Thermal Science and Engineering Progress, 19 .
Srinivasa Murthy, S and Dutta, P and Rao, BS and Sharma, R (2020) Performance analysis of a stand-alone polygeneration microgrid. In: Thermal Science and Engineering Progress, 19 .
Manila, MR and Mitra, S and Dutta, P (2020) Studies on dynamics of two-stage air cooled water/silica gel adsorption system. In: Applied Thermal Engineering, 178 .
Chakraborty, A and Dutta, P and Datta, A and Roy, N (2020) The study of the angular and spatial distribution of radio-selected AGNs and star-forming galaxies in the ELAIS N1 field. In: Monthly Notices of the Royal Astronomical Society, 494 (3). pp. 3392-3405.
Anand, AR and Ambirajan, A and Dutta, P (2020) Investigations on vapour blanket formation inside capillary wick of loop heat pipe. In: International Journal of Heat and Mass Transfer, 156 .
Malleswararao, K and N, A and Srinivasa Murthy, S and Dutta, P (2020) Performance prediction of a coupled metal hydride based thermal energy storage system. In: International Journal of Hydrogen Energy, 45 (32). pp. 16239-16253.
Kumar, J and Dutta, P and Roy, N (2020) Calibration requirements for epoch of reionization 21-cm signal observations – I. Effect of time-correlated gains. In: Monthly Notices of the Royal Astronomical Society, 495 (4). pp. 3683-3694.
Naha, A and Mandal, RS and Samanta, P and Saha, RN and Shaw, S and Ghosh, A and Chatterjee, NS and Dutta, P and Okamoto, K and Dutta, S and Mukhopadhyayid, AK (2020) Deciphering the possible role of ctxb7 allele on higher production of cholera toxin by haitian variant vibrio cholerae o1. In: PLoS Neglected Tropical Diseases, 14 (4). pp. 1-24.
Girnik, IS and Grekova, AD and Li, TX and Wang, RZ and Dutta, P and Srinivasa Murthy, S and Aristov, YI (2020) Composite �LiCl/MWCNT/PVA� for adsorption thermal battery: Dynamics of methanol sorption. In: Renewable and Sustainable Energy Reviews, 123 .
Singh, SK and Chattopadhyay, K and Dutta, P (2020) Determination of Optimum Process Parameters and Residual Stress in Friction Welding of Thixocast A356 Aluminum Alloy. In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science .
Chakraborty, A and Datta, A and Choudhuri, S and Roy, N and Intema, H and Choudhury, M and Datta, KK and Pal, S and Bharadwaj, S and Dutta, P and Choudhury, TR (2019) Detailed study of the ELAIS N1 field with the uGMRT - I. Characterizing the 325 MHz foreground for redshifted 21 cm observations. In: Monthly Notices of the Royal Astronomical Society, 487 (3). pp. 4102-4113.
Khivsara, S and Reddy, MUM and Reddy, KPJ and Dutta, P (2019) Measurement of radiation heat transfer in supercritical carbon dioxide medium. In: Measurement: Journal of the International Measurement Confederation, 139 . pp. 40-48.
Khivsara, S and Reddy, MUM and Reddy, KPJ and Dutta, P (2019) Measurement of radiation heat transfer in supercritical carbon dioxide medium. In: Measurement: Journal of the International Measurement Confederation, 139 . pp. 40-48.
Kund, NK and Dutta, P (2016) Numerical study of influence of oblique plate length and cooling rate on solidification and macrosegregation of A356 aluminum alloy melt with experimental comparison. In: JOURNAL OF ALLOYS AND COMPOUNDS, 678 . pp. 343-354.
Kund, NK and Dutta, P (2015) Numerical study of solidification of A356 aluminum alloy flowing on an oblique plate with experimental validation. In: JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS, 51 . pp. 159-170.
Dutta, P (2014) Heat transfer challenges in novel power cycles for concentrating solar power. In: Proceedings of the 15th International Heat Transfer Conference, IHTC 2014 .
Singh, Shailesh K and Chattopadhyay, K and Phanikumar, G and Dutta, P (2014) Experimental and numerical studies on friction welding of thixocast A356 aluminum alloy. In: ACTA MATERIALIA, 73 . pp. 177-185.
Barman, N and Dutta, P (2014) Rheology of A356 Alloy During Solidification Under Stirring. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 67 (1). pp. 101-104.
Das, P and Samanta, SK and Chattopadhyay, H and Sharma, BB and Dutta, P (2013) Eulerian two-phase flow simulation and experimental validation of semisolid slurry generation process using cooling slope. In: MATERIALS SCIENCE AND TECHNOLOGY, 29 (1). pp. 83-92.
Vikas, D and Basu, S and Dutta, P (2012) In-situ measurements of concentration and temperature during transient solidification of aqueous solution of ammonium chloride using laser interferometry. In: International Journal of Heat and Mass Transfer, 55 (7-8). pp. 2022-2034.
Ambirajan, A and Adoni, AA and Vaidya, JS and Rajendran, AA and Kumar, D and Dutta, P (2012) Loop Heat Pipes: A Review of Fundamentals, Operation, and Design. In: Heat Transfer Engineering, 33 (4-5). pp. 387-405.
Barman, N and Dutta, P (2012) Evolution of Microstructure During Solidification of an Aluminium Alloy Under Stirring. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 65 (6, SI). pp. 683-687. (In Press)
Kund, NK and Dutta, P (2012) Scaling Analysis of Solidification of Liquid Aluminum Alloy Flowing on Cooling Slope. In: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 65 (6, SI). pp. 587-594.
Saha, SK and Dutta, P (2011) Effect of Melt Convection on The Optimum Thermal Design Of Heat Sinks With Phase Change Material. In: Journal of Enhanced Heat Transfer, 18 (3). pp. 249-259.
Banker, ND and Prasad, M and Dutta, P and Srinivasan, K (2011) Experimental results of an activated carbon-HFC 134a adsorption cooling system for thermal management of electronics. In: Applied Thermal Engineering, 31 (10). pp. 1607-1612.
Phanikumar, G and Chattopadhyay, K and Dutta, P (2011) Joining of dissimilar metals: issues and modelling techniques. In: Science and Technology of Welding & Joining, 16 (4). pp. 313-317.
Pardeshi, R and Singh, AK and Voller, VR and Dutta, P (2011) A Dual Scale Model for Macrosegregation in Alloy Solidification. In: Numerical Heat Transfer Part A, 59 (12). pp. 934-953.
Tennyson, Gerald P and Kumar, PV and Lakshmi, H and Phanikumar, G and Dutta, P (2010) Experimental studies and phase field modeling of microstructure evolution during solidification with electromagnetic stirring. In: Transactions of Nonferrous Metals Society of China, 20 (Suppl.). S774-S780.
Lakshmi, H and Kumar, Vinay MC and Raghunath, * and Kumar, P and Ramanarayanan, V and Murthy, KSS and Dutta, P (2010) Induction reheating of A356.2 aluminum alloy and thixocasting as automobile component. In: Transactions of Nonferrous Metals Society of China, 20 (Suppl.). S961-S967.
Kund, NK and Dutta, P (2010) Numerical simulation of solidification of liquid aluminum alloy flowing on cooling slope. In: Transactions of Nonferrous Metals Society of China, 20 (Suppl.). S898-S905.
Banker, ND and Prasad, M and Dutta, P and Srinivasan, K (2010) Development and transient performance results of a single stage activated carbon - HFC 134a closed cycle adsorption cooling system. In: Applied Thermal Engineering, 30 (10). pp. 1126-1132.
Banker, ND and Prasad, M and Dutta, P and Srinivasan, K (2009) Activated carbon + HFC 134a based two stage thermal compression adsorption refrigeration using low grade thermal energy sources. In: Applied Thermal Engineering, 29 (11-12). pp. 2257-2264.
Pardeshi, R and Singh, AK and Dutta, P (2009) Modeling of Solidification Process in a Rotary Electromagnetic Stirrer. In: Numerical Heat Transfer, Part A: Applications, 55 (1). pp. 42-57.
Banker, ND and Dutta, P and Prasad, M and Srinivasan, K (2008) Performance studies on mechanical + adsorption hybrid compression refrigeration cycles with HFC 134a. In: International Journal of Refrigeration, 31 (8). pp. 1398-1406.
Pardeshi, R and Voller, VR and Singh, AK and Dutta, P (2008) An explicit–implicit time stepping scheme for solidification models. In: International Journal of Heat and Mass Transfer, 51 (13-14). pp. 3399-3409.
Saha, SK and Srinivasan, K and Dutta, P (2008) Studies on Optimum Distribution of Fins in Heat Sinks Filled With Phase Change Materials. In: Journal of Heat Transfer, 130 (3). 034505-1-034505-4.
Saha, BB and El-Sharkawy, II and Chakraborty, A and Koyama, S and Banker, ND and Dutta, P and Prasad, M and Srinivasan, K (2006) Evaluation of minimum desorption temperatures of thermal compressors in adsorption refrigeration cycles. In: International Journal of Refrigeration, 29 (7). pp. 1175-1181.
Nayak, KC and Saha, SK and Srinivasan, K and Dutta, P (2006) A numerical model for heat sinks with phase change materials and thermal conductivity enhancers. In: International Journal of Heat and Mass Transfer, 49 (11). pp. 1833-1844.
Phanikumar, G and Manjini, S and Dutta, P and Mazumder, J and Chattopadhyay, K (2005) Characterization of a continuous CO2 laser-welded Fe-Cu dissimilar couple. In: Metallurgical and Materials Transactions A, 36A (8). pp. 2137-2147.
Phanikumar, G and Dutta, P and Chattopadhyay, K (2005) Continuous welding of Cu-Ni dissimilar couple using $CO_{2}$ laser. In: Science and Technology of Welding and Joining, 10 (2). pp. 158-166.
Harish, J and Dutta, P (2005) Heat transfer analysis of pusher type reheat furnace. In: ronmaking and Steelmaking, 32 (2). pp. 151-158.
Basumatary, R and Dutta, P and Prasad, M and Srinivasan, K (2005) Thermal modeling of activated carbon based adsorptive natural gas storage system. In: Carbon, 43 (3). pp. 541-549.
Das, SP and Chakraborty, S and Dutta, P (2004) Studies on Thermal Stratification Phenomenon in $LH_2$ Storage Vessel. In: Heat Transfer Engineering, 25 (4). 54 - 66.
Kumar, P and Chakraborty, S and Srinivasan, K and Dutta, P (2003) Studies on Transport Phenomena during Directional Solidification of a Noneutectic Binary Solution Cooled from the Top. In: Metallurgical and Materials Transactions B, 34 (6). pp. 899-909.
Bysakh, S and Mitra, SK and Phanikumar, G and Mazumder, J and Dutta, P and Chattopadhyay, K (2003) Characterization of microstructure in laser-surface-alloyed layers of aluminum on nickel. In: Metallurgical and Materials Transactions A, 34A (11). pp. 2621-2631.
Chakraborty, S and Dutta, P (2003) Three-dimensional double-diffusive convection and macrosegregation during non-equilibrium solidification of binary mixtures. In: International Journal of Heat and Mass Transfer, 46 (12). pp. 2115-2134.
Chakraborty, S and Chakraborty, N and Kumar, P and Dutta, P (2003) Studies on turbulent momentum, heat and species transport during binary alloy solidification in a top-cooled rectangular cavity. In: International Journal of Heat and Mass Transfer, 46 (7). pp. 1115-1137.
Sarkar, S and Raj, Mohan P and Chakraborty, S and Phanikumar, G and Chattopadhyay, K and Dutta, P (2003) Transport phenomena in laser surface alloying. In: Journal of Materials Science, 38 (1). pp. 155-164.
Kumar, P and Chakraborty, S and Srinivasan, K and Dutta, P (2002) Rayleigh-Benard convection during solidification of an eutectic solution cooled from the top. In: Metallurgical and Materials Transactions B, 33 (4). pp. 605-612.
Sarkar, S and Raj, Mohan P and Chakraborty, S and Dutta, P (2002) Three-dimensional computational modeling of momentum, heat, and mass transfer in a laser surface alloying process. In: Numerical Heat Transfer Part A, 42 (3). pp. 307-326.
Kumar, Suresh K and Phanikumar, G and Dutta, P and Chattopadhyay, K (2002) Microstructural development of dissimilar weldments: case of MIG welding of Cu with Fe filler. In: Journal of Materials Science, 37 (11). pp. 2345-2349.
Raj, Mohan P and Sarkar, S and Chakraborty, S and Phanikumar, G and Dutta, P and Chattopadhyay, K (2002) Modelling of transport phenomena in laser surface alloying with distributed species mass source. In: International Journal of Heat and Fluid Flow, 23 (3). pp. 298-307.
Chakraborty, S and Dutta, P (2002) Scaling analysis of momentum, heat, and mass transfer in binary alloy solidification problems. In: Materials Science and Technology, 18 (6). 600-606 .
Das, SP and Chakraborty, S and Dutta, P (2002) Natural Convection in a Two-Dimensional Enclosure Heated Symmetrically from Both Sides. In: International Communications in Heat and Mass Transfer, 29 (3). pp. 345-354.
Chakraborty, S and Sarkar, S and Dutta, P (2002) Scaling analysis of momentum and heat transport in gas tungsten arc weld pools. In: Science and Technology of Welding & Joining, 7 (2). 88-94 .
Akkimaradi, BS and Prasad, M and Dutta, P and Srinivasan, K (2002) Effect of packing density and adsorption parameters on the throughput of a thermal compressor. In: Carbon, 40 (15). pp. 2855-2859.
Chakraborty, S and Sarkar, S and Dutta, P (2001) Effect of constitutional supercooling on the numerical solution of species concentration distribution in laser surface alloying. In: Metallurgical and Materials Transactions B, 32 (5). pp. 969-972.
Jaidi, J and Dutta, P (2001) Modeling of Transport Phenomena in a Gas Metal Arc Welding Process. In: Numerical Heat Transfer, Part A: Applications, 40 (5). pp. 543-562.
Raj, PM and Sarkar, S and Chakraborty, S and Dutta, P (2001) Three-dimensional computational modelling of momentum, heat and mass transfer in laser surface alloying with distributed melting of alloying element. In: International Journal of Numerical Methods for Heat and Fluid Flow, 11 (5-6). pp. 576-599.
Sarkar, S and Chakraborty, S and Dutta, P (2001) A scaling analysis of momentum and heat transport in laser surface melting. In: Lasers in Engineering, 11 (1). pp. 57-75.
Phanikumar, G and Chattopadhyay, K and Dutta, P (2000) Supercomputing applications in materials engineering. In: Current Science, 78 (7). pp. 847-849.
Chakraborty, S and Dutta, P (2000) A generalized algorithm for modelling phase change problems in materials processing. In: Current Science, 78 (7). pp. 887-891.
Krishnaprakas, CK and Narayana, KB and Dutta, P (2000) Radiation in boundary layer flow of an absorbing, emitting and anisotropically scattering fluid. In: International Journal of Numerical Methods For Heat & Fluid, 10 (5-6). pp. 530-540.
Krishnaprakas, CK and Narayana, KB and Dutta, P (1999) Combined convective and radiative heat transfer in turbulent tube flow. In: Journal Of Thermophysics And Heat Transfer, 13 (3). pp. 390-394.
Chakraborty, S and Dutta, P (1999) A scaling analysis for transport phenomena during alloy solidification in a rectangular cavity. In: Journal Of Materials Processing & Manufacturing Science, 7 (3). pp. 236-250.
Joshi, Y and Dutta, P and Schupp, PE and Espinosa, D (1997) Nonaxisymmetric convection in stationary Gas Tungsten Arc Weld Pools. In: Journal of Heat Transfer, 119 (1). pp. 164-172.