|
 | Up a level |
Panda, Ajay Kumar and Bobji, MS (2018) Design of High Stiffness Inertial Slider for In-Situ TEM. In: International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS), JUL 04-08, 2018, Nagoya, JAPAN.
Jayadeep, UB and Bobji, MS (2017) Energy loss due to adhesion during the impact of elastic spheres. In: 11th International Symposium on Plasticity and Impact Mechanics (IMPLAST), DEC 11-14, 2016, Indian Inst Technol, New Delhi, INDIA, pp. 238-243.
Nampoothiri, Krishnadas Narayanan and Srinivasan, Vinod and Bobji, MS and Sen, Prosenjit (2017) A NOVEL SUB-PICOLITER MONODISPERSED DROPLET GENERATION DEVICE BASED ON LIQUID DIELECTROPHORESIS. In: 30th IEEE International Conference on Micro Electro Mechanical Systems (MEMS), JAN 22-26, 2017, Las Vegas, NV, pp. 87-90.
Kumar, Saurabh and Shrikanth, V and Bharadwaj, Amrutur and Asokan, Sundarrajan and Bobji, MS (2016) Estimating needle-tissue interaction forces for hollow needles using Fiber Bragg Grating Sensors. In: Conference on Optical Fibers and Sensors for Medical Diagnostics and Treatment Applications XVI, FEB 13-14, 2016.
Shrikanth, V and Simha, KRY and Bobji, MS (2015) Frictional force measurement during stick-slip motion of a piezoelectric walker. In: IEEE International Conference on Industrial Technology (ICIT), MAR 17-19, 2015, Seville, SPAIN, pp. 1463-1468.
Yadav, Arti and Pendyala, Prashant and Bobji, MS (2014) On Using Nanoporous Alumina Films as Tribological Coating. In: International Conference on Advances in Tribology and Engineering Systems (ICATES), October 15-17, 2013, Ahmedabad, Gujarath, pp. 403-409.
Viegas, AE and Dutta, S and Rekha, S and Bobji, MS and Raghavan, S and Bhat, N (2019) 3d nano capacitors using electrodeposited nickel nanowires in porous anodic alumina template. In: 19th International Workshop on Physics of Semiconductor Devices, IWPSD 2017, 11 - 15 December 2017, New Delhi, pp. 577-581.
Dutta, S and Singh, MK and Bobji, MS (2018) Probing atomic level interactions in Ni nanorods and AFM cantilever using atomic force microscopy based F–D spectroscopy. In: 9th International Scientific Conference, BALTTRIB 2017, 16 - 17 November 2017, Kaunas, pp. 194-198.
Nampoothiri, Krishnadas Narayanan and Srinivasan, Vinod and Bobji, MS and Sen, Prosenjit (2016) Active thermal cooling using liquid dielectrophoresis. In: 3rd International Conference on Emerging Electronics, ICEE 2016, 27-30 December 2016, Mumbai, pp. 1-4.
Arul Selvan, K and Bobji, MS (2012) Extentional characteristics of a liquid filament with dispersed nanoparticles. In: International Conference on Nanoscience and Technology (ICONSAT - 2012), January 20 to 23, 2012, Hyderabad, India.
Inkson, BJ and Wang, JJ and Anantheshwara, A and Bobji, MS and Lockwood, AJ (2012) Friction induced phase transformations at surfaces characterised in-situ by TEM nanotribology. In: 10th Asia-Pacific Microscopy Conference, Feb 5-9, 2012, Perth, Australia.
Anantheshwara, K and Bobji, MS (2012) Nanoscale wear experiments in Transmision electron microscope. In: International Conference On Nano Science and Technology, 20th to 23rd January 2012, Hyderabad, India.
Bobji, MS and Selvan, Arul K (2009) Mechanical Machining for Nano manufacturing. In: Sixth International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 6) , 11-12 December, 2009, Coimbatore.
Bobji, MS and Govardhan, RN (2009) Designing superhydrophobic surfaces for underwater applications. In: Conference on Recent Advances in Surface Engineering (RASE09), 26-27 February, 2009, NAL, Bangalore.
Dilip, C and Sriranga, TS and Samuel, R and Behera, Raghunath and Kubair, DV and Bobji, MS (2008) Strain field measurement using digital image correlation. In: Proceedings of 24th Annual Inhouse Symposium on Space Science and Technology, January 2008, Bangalore.
Anantheshwara, K and Bobji, MS (2007) Frictional Behaviour of Inertial Slider. In: Procedings of NCRSME07, , 2007, Kanpur, India.
Bobji, MS (2007) Non contact Deformation Measurement of Large Space Structures Using Digital Image Correlation. In: Conference on Advances in Space Science and Technology, , 2007, Bangalore.
Bobji, MS and Biswas, SK (1997) Numerical simulation of nano-indentation on rough surfaces. In: 10th International Conference on Surface Modification Technologies, 2-4 Sept. 1997, Singapore; Singapore.
Bobji, MS and Xavier, Shijo and Badole, Rupesh and Solomon, Christopher and Raddaiah, T and Chandra, Piyush and Haldar, Sandip (2006) A Comparative Study of Roughness Parameters for Different Surfaces. In: International Conference on Industrial Tribology.
Awasthi, S and Gaur, JK and Bobji, MS and Srivastava, C (2022) Nanoparticle-reinforced polyacrylamide hydrogel composites for clinical applications: a review. In: Journal of Materials Science, 57 (17). pp. 8041-8063.
M, Muthukumar and Bobji, MS and Simha, KRY (2022) Cone cracks in tissue-mimicking hydrogels during hypodermic needle insertion: the role of water content. In: Soft Matter, 18 . pp. 3521-3530. ISSN 1744-683X
Singh, MK and Tiku, H and Bobji, MS (2022) Study of Contact Line Parameters of Evaporating Sessile Drops from Various Substrates. In: Silicon .
Yadav, A and Muthukumar, M and Bobji, MS (2021) Tuning dendritic structure at nanoporous alumina/aluminium interface for uniform electrodeposition of metals for nanocomposite coatings. In: Surfaces and Interfaces, 24 .
Awasthi, S and Gaur, JK and Pandey, SK and Bobji, MS and Srivastava, C (2021) High-Strength, Strongly Bonded Nanocomposite Hydrogels for Cartilage Repair. In: ACS Applied Materials and Interfaces .
Muthukumar, M and Bobji, MS and Simha, KRY (2021) Needle insertion-induced quasiperiodic cone cracks in hydrogel. In: Soft Matter, 17 (10). pp. 2823-2831.
Awasthi, S and Gaur, JK and Bobji, MS (2020) Advanced ferrogels with high magnetic response and wear resistance using carbon nanotubes. In: Journal of Alloys and Compounds, 848 .
Muthukumar, M and Yadav, A and Bobji, MS (2020) Wear characteristics of nanoporous alumina and copper filled nanocomposite coatings. In: Wear, 462-46 .
Dutta, S and Vikram, GNVR and Bobji, MS and Mohan, S (2020) Table top experimental setup for electrical contact resistance measurement during indentation. In: Measurement: Journal of the International Measurement Confederation, 152 .
Nampoothiri, KN and Bobji, MS and Sen, P (2020) De-Icing Device with Self-Adjusting Power Consumption and Ice Sensing Capabilities. In: Journal of Microelectromechanical Systems, 29 (4). pp. 562-570.
Swain, A and Begam, N and Chandran, S and Bobji, MS and Basu, JK (2020) Engineering interfacial entropic effects to generate giant viscosity changes in nanoparticle embedded polymer thin films. In: Soft Matter, 16 (16). pp. 4065-4073.
Kumar, N and Arakeri, JH and Bobji, MS (2020) Formation of a hard surface layer during drying of a heated porous media. In: PLoS ONE, 15 (2).
Yadav, Arti and Bobji, MS and Bull, Steve J (2019) Controlled Growth of Highly Aligned Cu Nanowires by Pulse Electrodeposition in Nanoporous Alumina. In: JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 19 (7). pp. 4254-4259.
Shrikanth, V and Archana, S and Bobji, MS (2019) A new method to study evaporation of sessile drop from permeable surfaces. In: MEASUREMENT SCIENCE AND TECHNOLOGY, 30 (7).
Nampoothiri, Krishnadas Narayanan and Seshasayee, Mahadevan Subramanya and Srinivasan, Vinod and Bobji, MS and Sen, Prosenjit (2018) Direct heating of aqueous droplets using high frequency voltage signals on an EWOD platform. In: SENSORS AND ACTUATORS B-CHEMICAL, 273 . pp. 862-872.
Muthukumar, M and Bobji, MS (2018) Effect of micropillar surface texturing on friction under elastic dry reciprocating contact. In: MECCANICA, 53 (9). pp. 2221-2235.
Dilip, D and Kumar, Vijay S and Bobji, MS and Govardhan, Raghuraman N (2018) Sustained drag reduction and thermo-hydraulic performance enhancement in textured hydrophobic microchannels. In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 119 . pp. 551-563.
Yadav, Arti and Muthukumar, M and Bobji, MS (2016) Porous alumina based ordered nanocomposite coating for wear resistance. In: MATERIALS RESEARCH EXPRESS, 3 (8).
Devi, Lavanya AL and Nongthomba, Upendra and Bobji, MS (2016) Quantitative characterization of adhesion and stiffness of corneal lens of Drosophila melanogaster using atomic force microscopy. In: JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 53 . pp. 161-173.
Dilip, D and Bobji, MS and Govardhan, Raghuraman N (2015) Effect of absolute pressure on flow through a textured hydrophobic microchannel. In: MICROFLUIDICS AND NANOFLUIDICS, 19 (6). pp. 1409-1427.
Dilip, D and Jha, Narsing K and Govardhan, Raghuraman N and Bobji, MS (2014) Controlling air solubility to maintain `'Cassie'' state for sustained drag reduction. In: COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 459 . pp. 217-224.
Gelli, Vikram NVR and Bobji, MS and Mohan, S (2014) Effect of contact stresses on shape recovery of NiTiCu thin films. In: THIN SOLID FILMS, 564 . pp. 306-313.
Bharathidasan, T and Kumar, Vijay S and Bobji, MS and Chakradhar, RPS and Basu, Bharathibai J (2014) Effect of wettability and surface roughness on ice-adhesion strength of hydrophilic, hydrophobic and superhydrophobic surfaces. In: APPLIED SURFACE SCIENCE, 314 . pp. 241-250.
Jayadeep, UB and Bobji, MS and Jog, CS (2014) Energy Loss in the Impact of Elastic Spheres on a Rigid Half-Space in Presence of Adhesion. In: TRIBOLOGY LETTERS, 53 (1). pp. 79-89.
Jayadeep, UB and Bobji, MS and Jog, CS (2014) Energy loss due to adhesion in longitudinal impact of elastic cylinders. In: EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 45 . pp. 20-31.
Pendyala, Prashant and Bobji, MS and Madras, Giridhar (2014) Evolution of Surface Roughness During Electropolishing. In: TRIBOLOGY LETTERS, 55 (1). pp. 93-101.
Shrikanth, V and Bobji, MS (2014) A non-resonant mass sensor to eliminate the ``missing mass'' effect during mass measurement of biological materials. In: REVIEW OF SCIENTIFIC INSTRUMENTS, 85 (10).
Bobji, MS and Kailas, Satish V and Ananthasuresh, GK and Ayappa, Ganapathy and Jayaram, Vikram and Visweswariah, Sandhya S (2013) Sanjay Kumar Biswas (1945-2013). In: Current Science, 104 (12). pp. 1718-1719.
Anantheshwara, K and Lockwood, AJ and Mishra, Raja K and Inkson, BJ and Bobji, MS (2012) Dynamical Evolution of Wear Particles in Nanocontacts. In: Tribology Letters, 45 (2). pp. 229-235.
Lockwood, AJ and Anantheshwara, K and Bobji, MS and Inkson, BJ (2011) Friction-formed liquid droplets. In: Nanotechnology, 22 (10).
Bobji, MS and Pendyala, Prashant and Gupta, Preeti and Kalode, Pranav (2011) Effect of porosity on the indentation behaviour of nanoporous alumina films. In: International Journal of Surface Science and Engineering, 5 (1, Sp.). pp. 51-62.
Lockwood, AJ and Wedekind, J and Gay, RS and Wang, JJ and Bobji, MS and Amavasai, B and Howarth, M and Möbus, G and Inkson, BJ (2011) NanoLAB Triboprobe: Characterizing Dynamic Wear, Friction and Fatigue at the Nanoscale. In: MRS Proceedings, 1297 . 03-61.
Bobji, MS and Xavier, Shijo and Jayadeep, UB and Jog, CS (2010) Adhesion-Induced Instability in Asperities. In: Tribology Letters, 39 (2). pp. 201-209.
Lockwood, AJ and Wedekind, J and Gay, RS and Bobji, MS and Amavasai, B and Howarth, M and Moebus, G and Inkson, BJ (2010) Advanced transmission electron microscope triboprobe with automated closed-loop nanopositioning. In: Measurement Science and Technology, 21 (7).
Anantheshwara, K and Bobji, MS (2010) In situ transmission electron microscope study of single asperity sliding contacts. In: Tribology International, 43 (5-6, S). pp. 1099-1103.
Wang, JJ and Lockwood, AJ and Peng, Y and Xu, X and Bobji, MS and Inkson, BJ (2009) The formation of carbon nanostructures by in situ TEM mechanical nanoscale fatigue and fracture of carbon thin films. In: Nanotechnology, 20 (30). p. 305703.
Govardhan, RN and Srinivas, GS and Asthana, A and Bobji, MS (2009) Time dependence of effective slip on textured hydrophobic surfaces. In: Physics of Fluids, 21 (5).
Anantheshwara, K and Selvan, K Arul and Mishra, Raja K and Bobji, MS (2009) In situ transmission electron microscopy study of deformation of an aluminum alloy tribolayer. In: Scripta Materialia, 60 (8). pp. 623-626.
Anantheshwara, K and Murali, NS and Bobji, MS (2008) Effect of friction on the performance of inertial slider. In: Sadhana, 33 (3). pp. 221-226.
Bobji, MS and Pethica, JB and Inkson, BJ (2005) Indentation mechanics of Cu-Be quantified by an in situ transmission electron microscopy mechanical probe. In: Journal of Materials Research, 20 (10). pp. 2726-2732.
Bobji, MS (2005) Springing the trap. In: Journal of Biosciences, 30 (2). pp. 143-146.
Bobji, MS and Venkatesh, K and Biswas, SK (1999) Roughness generated in surface grinding of metals. In: Journal of Tribology, 121 (4). pp. 746-752.
Bobji, MS and Biswas, SK (1999) Deconvolution of hardness from data obtained from nanoindentation of rough surfaces. In: Journal Of Materials Research, 14 (6). pp. 2259-2268.
Venkatesh, K and Bobji, MS and Gargi, R and Biswas, SK (1999) Genesis of workpiece roughness generated in surface grinding and polishing of metals. In: Wear, 225-22 (1). pp. 215-226.
Bobji, MS and Shivakumar, K and Alehossein, H and Venkateshwarlu, V and Biswas, SK (1999) Influence of surface roughness on the scatter in hardness measurements - a numerical study. In: International Journal of Rock Mechanics and Mining Sciences, 36 (3). pp. 399-404.
Venkatesh, K and Bobji, MS and Biswas, SK (1999) Power spectra of roughness caused by grinding of metals. In: Journal of Materials Research, 14 (2). pp. 319-322.
Bobji, MS and Biswas, SK (1999) Hardness of a surface containing uniformly spaced pyramidal asperities. In: Tribology Letters, 7 (1). pp. 51-56.
Venkatesh, K and Bobji, MS and Biswas, SK (1998) Roughness due to workpiece wear generated in surface grinding of metals. In: Tribology International, 31 (12). pp. 771-778.
Bobji, MS and Biswas, SK (1998) Estimation of hardness by nanoindentation of rough surfaces. In: Journal of Materials Research, 13 (11). pp. 3227-3233.
Venkatesh, K and Bobji, MS and Biswas, SK (1998) Some features of surface topographical power spectra generated by conventional machining of a ductile metal. In: Materials Science and Engineering A, 252 (1). pp. 153-155.
Bobji, MS and Biswas, SK and Pethica, JB (1997) Effect of roughness on the measurement of nanohardness—a computer simulation study. In: Applied Physics Letters, 71 (8). pp. 1059-1061.
Bobji, MS and Biswas, SK (1996) Determination and study of the strength of the blister field generated by conical indentation. In: Philosophical Magazine A, 73 (2). pp. 399-413.
