|
 | Up a level |
van Es, P and Biswas, SK and Moens, Bernlot HJ and Steenbergen, W and Manohar, S (2015) Photoacoustic tomography of the human finger: towards the assessment of inflammatory joint diseases. In: PHOTONS PLUS ULTRASOUND: IMAGING AND SENSING 2015, FEB 08-10, 2015, San Francisco, CA.
Biswas, SK and van Es, P and Steenbergen, W and Manohar, S (2015) A new approach to depict bone surfaces in finger imaging using photoacoustic tomography. In: PHOTONS PLUS ULTRASOUND: IMAGING AND SENSING 2015, FEB 08-10, 2015, San Francisco, CA.
Biswas, SK and Rajan, K and Vasu, RM (2012) Linearization and Reconstruction of Non-linear Diffuse Optical Tomographic Image. In: Conference on Medical Imaging - Physics of Medical Imaging, FEB 05-08, 2012 , San Diego, CA, USA.
Manimunda, P and Filleter, T and Egberts, P and Jayaram, V and Biswas, SK and Bennewitz, R (2009) Nano-meter scale plasticity in KBr studied by nanoindenter and force microscopy. In: Symposium on Probing Mechanics at Nanoscale Dimensions held at the 2009 MRS Spring Meeting, APR 14-17, 2009, San Francisco, CA, pp. 81-86.
Ashwin, B and Narahari, Y and Biswas, SK (2008) Cost Sharing Mechanisms for Business Clusters with Strategic Firms. In: IEEE International Conference on Automation Science and Engineering, AUG 23-26, 2008, Arlington.
Biswas, SK and Rajan, K and Vasu, RM (2008) Experimental implementation of the phase-correlated dual shape optical tomographic imaging system. In: International Conference on Bio-Medical Instrumentation.
Biswas, SK and Devaprakasam, D (2006) Stress induced phase transition in monomolecular perfluroalkylsilane film self assembled on aluminium surface. In: Symposium on Surface Engineering for Manufacturing Applications held at the 2005 MRS Fall Meeting, Nov 28-Dec 01, 2005, Boston, MA,, pp. 241-246.
Bobji, MS and Biswas, SK (1997) Numerical simulation of nano-indentation on rough surfaces. In: 10th International Conference on Surface Modification Technologies, 2-4 Sept. 1997, Singapore; Singapore.
Biswas, SK (1997) Siding wear of materials. In: 1st World Tribology Congress - New Directions in Tribology, Sep 08, 1996-Sep 12, 1997, London, England.
Kailas, Satish V and Biswas, SK (1993) Material response to two-dimensional scratching by wedges. In: 9th International Conference on Wear of Materials, 13-16 April 1993, San Francisco, CA, USA, pp. 110-118.
Biswas, SK and van Es, P and Steenbergen, W and Manohar, S (2016) A Method for Delineation of Bone Surfaces in Photoacoustic Computed Tomography of the Finger. In: ULTRASONIC IMAGING, 38 (1, SI). pp. 63-76.
Sahoo, RR and Biswas, SK (2014) Effect of Layered MoS2 Nanoparticles on the Frictional Behavior and Microstructure of Lubricating Greases. In: TRIBOLOGY LETTERS, 53 (1). pp. 157-171.
Bhowmick, Hiralal and Majumdar, SK and Biswas, SK (2013) Influence of physical structure and chemistry of diesel soot suspended in hexadecane on lubrication of steel-on-steel contact. In: Wear, 300 (1-2). pp. 180-188.
Bhowmick, Hiralal and Majumdar, SK and Biswas, SK (2012) Tribology of soot suspension in hexadecane as distinguished by the physical structure and chemistry of soot particles. In: JOURNAL OF PHYSICS D-APPLIED PHYSICS, 45 (17).
Bhowmick, H and Majumdar, SK and Biswas, SK (2012) Dry tribology and nanomechanics of gaseous flame soot in comparison with carbon black and diesel soot. In: Proceedings of the Institution of Mechanical Engineers - Part C: Journal of Mechanical Engineering Science, 226 (C2). pp. 394-402.
Bhowmick, Hiralal and Biswas, SK (2011) Tribology of ethylene-air diffusion flame soot under dry and lubricated contact conditions. In: Journal of Physics D: Applied Physics, 44 (48).
Bhowmick, Hiralal and Biswas, SK (2011) Relationship Between Physical Structure and Tribology of Single Soot Particles Generated by Burning Ethylene. In: Tribology Letters, 44 (2). pp. 139-149.
Mahato, Anirban and Verma, Nisha and Jayaram, Vikram and Biswas, SK (2011) Severe wear of a near eutectic aluminium-silicon alloy. In: Acta Materialia, 59 (15). pp. 6069-6082.
Pottirayil, Anirudhan and Kailas, Satish V and Biswas, SK (2011) Lubricity of an oil in water emulsion in metal cutting: The effect of hydrophilic/lypophilic balance of emulsifiers. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 384 (1-3). pp. 323-330.
Kumar, Deepak and Daniel, Jency and Biswas, SK (2010) Tribology of steel/steel interaction in oil-in-water emulsion: a rationale for lubricity (vol 345, pg 307, 2010). In: Journal of Colloid and Interface Science, 351 (2). p. 584.
Mahato, Anirban and Sachdev, Anil and Biswas, SK (2010) Lubricated Tribology of a Eutectic Aluminium-Silicon Alloy in the Ultra-Mild Wear and Mild Wear Regimes for Long Sliding Times. In: ACS Applied materials & interfaces , 2 (10). pp. 2870-2879.
Pottirayil, Anirudhan and Kailas, Satish V and Biswas, SK (2010) Experimental estimation of friction force in lubricated cutting of steel. In: Wear, 269 (7-8). pp. 557-564.
Mallik, Awadesh K and Binu, SR and Satapathy, LN and Narayana, Chandrabhas and Seikh, Md Motin and Shivashankar, SA and Biswas, SK (2010) Effect of substrate roughness on growth of diamond by hot filament CVD. In: Bulletin of Materials Science, 33 (3). pp. 251-255.
Bhattarchya, S and De, D and Ghosh, S and Banerjee, P and Saha, S and Mitra, M and Nag, B and Pal, M and Mitra, M and Biswas, SK and Ghatak, KP (2010) Influence of External Light Waves on the Thermoelectric Power Under Strong Magnetic Field in Ultrathin Films, Quantum Wires and Quantum Dots of Optoelectronic Materials. In: Journal of Computational and Theoretical Nanoscience, 7 (6). pp. 1066-1084.
De, D and Kumar, A and Adhikari, SM and Pahari, S and Islam, N and Banerjee, P and Biswas, SK and Bhattacharya, S and Ghatak, KP (2010) Influence of quantum confinement on the photoemission from superlattices of optoelectronic materials. In: Superlattices and Microstructures, 47 (3). pp. 377-410.
Mahato, Anirban and Perry, Thomas A and Jayaram, Vikram and Biswas, SK (2010) Pressure and thermally induced stages of wear in dry sliding of a steel ball against an aluminium-silicon alloy flat. In: Wear, 268 (9-10). pp. 1080-1090.
Sahoo, Rashmi R and Math, Souvik and Biswas, SK (2010) Mechanics of Deformation under Traction and Friction of a Micrometric Monolithic MoS2 Particle in Comparison with those of an Agglomerate of Nanometric MoS2 Particles. In: Tribology Letters, 37 (2). pp. 239-249.
Mahato, Anirban and Xia, Shuman and Perry, Tom and Sachdev, Anil and Biswas, SK (2010) Role of silicon in resisting subsurface plastic deformation in tribology of aluminium-silicon alloys. In: Tribology International, 43 (1-2). pp. 381-387.
Potnis, Prashant and Holtzinger, Jennifer and Das, Dipak and Jayaram, Vikram and Biswas, SK (2009) Study of fracture behaviour of bond coats on nickel superalloy by three-point bending of microbeams. In: Surface and Coatings Technology, 204 (5). pp. 586-592.
Mallik, Awadesh K and Shivashankar, SA and Biswas, SK (2009) High vacuum tribology of polycrystalline diamond coatings. In: Sadhana, 34 (5). pp. 811-821.
Ajikumar, PK and Kamruddin, M and Shankar, P and Gouda, Ramakrishna and Balamurugan, AK and Nithya, R and Tyagi, AK and Jayaram, V and Biswas, SK and Raj, Baldev (2009) Internal nitride formation during gas-phase thermal nitridation of titanium. In: Scripta Materialia, 61 (4). pp. 403-406.
Sahoo, Rashmi R and Biswas, SK (2009) Frictional response of fatty acids on steel. In: Journal of Colloid and Interface Science, 333 (2). pp. 707-7148.
Subhalakshmi, K and Devaprakasam, D and Math, S and Biswas, SK (2008) Use of eyring equation to explore the frictional responses of a -CF3 and a -CH3 terminated monolayers self assembled on silicon substrate. In: Tribology Letters, 32 (1). 01-11.
Mahato, Anirban and Sachdev, Anil K and Biswas, SK (2008) Effect of particle morphology on resistance to permanent sinking by normal loading of silicon particle in aluminium matrix of a cast aluminium silicon alloy. In: Wear, 365 (5-6). pp. 849-855.
Suresha, SJ and Gunda, R and Jayarama, V and Biswas, SK (2007) Effect of residual stress on the fracture strength of columnar TiN films. In: Journal of Material Research, 22 (12). pp. 3501-3506.
Das, Sarmistha and Varalakshmi, K and Jayaram, V. and Biswas, SK (2007) Ultra Mild Wear in Lubricated Tribology of an Aluminium Alloy. In: Journal of Tribology, 129 (4). pp. 942-951.
Suresha, SJ and Math, S and Jayaram, V and Biswas, SK (2007) Toughening through multilayering in TiN–AlTiN films. In: Philosophical Magazine, 87 (17). pp. 2521-2539.
Math, Souvik and Suresha, SJ and Jayaram, V and Biswas, SK (2006) Indentation of a hard film on a compliant substrate: film fracture mechanisms to accommodate substrate plasticity. In: Journal of Materials Science, 41 (23). pp. 7830-7837.
Mukherjee, S and Jayaram, V and Biswas, SK (2006) Validation of stresses and stress intensity factor in a notched bilayer system under four point bending, as determined by the solution of the Navier’s equation. In: International Journal of Mechanical Sciences, 48 (11). pp. 1287-1294.
Khatri, OP and Biswas, SK (2006) Boundary lubrication capabilities of alkylsilane monolayer self-assembled on aluminium as investigated using FTIR spectroscopy and nanotribometry. In: Surface Science, 600 (18). pp. 4399-4404.
Suresha, SJ and Bhide, R and Jayaram, V and Biswas, SK (2006) Processing, microstructure and hardness of TiN/(Ti, Al)N multilayer coatings. In: Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, 429 (1-2). 252 -260.
Jayaram, V and Bhowmick, S and Xie, ZH and Math, S and Hoffman, M and Biswas, SK (2006) Contact deformation of TiN coatings on metallic substrates. In: Materials Science and Engineering: A, 423 (1-2). 08-13.
Math, Souvik and Jayaram, V and Biswas, SK (2006) Deformation and failure of a film/substrate system subjected to spherical indentation: Part 1. Experimental validation of stresses and strains derived using Hankel transform technique in an elastic film/substrate system. In: Journal of Materials Research, 21 (3). pp. 774-782.
Math, S and Jayaram, V and Biswas, SK (2006) Deformation and failure of a film/substrate system subjected to spherical indentation: Part II. Prediction of failure modes in a thin TiN film deposited on a compliant elastic substrate. In: Journal of Materials Research, 21 (3). pp. 783-790.
Khatri, OP and Devaprakasam, D and Biswas, SK (2005) Frictional Responses of Octadecyltrichlorosilane (OTS) and 1H, 1H, 2H, 2H-Perfluorooctyltrichlorosilane (FOTS) Monolayers Self-assembled on Aluminium over Six Orders of Contact Length Scale. In: Tribology Letters, 20 (3&4). pp. 235-246.
Devaprakasam, D and Khatri, OP and Shankar, N and Biswas, SK (2005) Boundary lubrication additives for aluminium: A journey from nano to macrotribology. In: Tribology International, 38 (11-12). pp. 1022-1034.
Bhowmick, S and Bhide, R and Hoffman, M and Jayaram, V and Biswas, SK (2005) Fracture mode transitions during indentation of columnar TiN coatings on metal. In: Philosophical Magazine, 85 (25). pp. 2927-2945.
Devaprakasam, D and Biswas, SK (2005) Molecular damping: Mechanical response of self-assembled monomolecular layer to compression. In: Physical Review B, 72 (12).
Gunda, R and Biswas, SK and Bhowmick, S and Jayaram, V (2005) Mechanical Properties of Rough TiN Coating Deposited on Steel by Cathodic Arc Evaporation Technique. In: Journal of The American Ceramic Society, 88 (7). pp. 1831-1837.
Bhowmick, S and Jayaram, V and Biswas, SK (2005) Deconvolution of fracture properties of TiN films on steels from nanoindentation load-displacement curves. In: Acta Materialia, 53 (8). pp. 2459-2467.
Devaprakasam, D and Biswas, SK (2005) Measurement of stiffness and damping constant of self-assembled monolayers. In: Review of Scientific Instruments, 76 (3). 035102-1-035102-7.
Prathima, N and Harini, A and Rai, Neeraj and Chandrashekara, RH and Ayappa, KG and Sampath, S and Biswas, SK (2005) Thermal Study of Accumulation of Conformational Disorders in the Self-Assembled Monolayers of C-8 and C-18 Alkanethiols on the Au(111) Surface. In: Langmuir, 21 (6). pp. 2364-2374.
Das, Sarmistha and Biswas, SK (2004) Boundary Lubricated Tribology of an Aluminum-Silicon Alloy Sliding Against Steel. In: Tribology Letters, 17 (3). pp. 623-628.
Khatri, Prakash Om and Biswas, SK (2004) Thermal stability of octadecyltrichlorosilane self-assembled on a polycrystalline aluminium surface. In: Surface Science, 572 (2-3). pp. 228-238.
Bhowmick, S and Xie, ZH and Hoffman, M and Jayaram, V and Biswas, SK (2004) Nature of contact deformation of TiN films on steel. In: Journal Of Materials Research, 19 (9). pp. 2616-2624.
Devaprakasam, D and Sampath, S and Biswas, SK (2004) Thermal Stability of Perfluoroalkyl Silane Self-Assembled on a Polycrystalline Aluminum Surface. In: Langmuir, 20 (4). pp. 1329-1334.
Bhowmick, S and Kale, AN and Jayaram, V and Biswas, SK (2003) Contact damage in TiN coatings on steel. In: Thin Solid Films, 436 (2). pp. 250-258.
Sriram, K and Narasimhan, R and Biswas, SK (2003) A numerical fracture analysis of indentation into thin hard films on soft substrates. In: Engineering Fracture Mechanics, 70 (10). pp. 1323-1338.
Devaprakasam, D and Biswas, SK (2003) Design of a flexure for surface forces apparatus. In: Review of Scientific Instruments, 74 (3). pp. 1228-1233.
Tantri, Srikari P and Jayasingh, Moses E and Biswas, SK and Ramasesha, Sheela K (2002) Role of in situ generated tribofilm on the tribological characteristics of monolith and TiB2 reinforced MoSi2 intermetallic. In: Materials Science and Engineering A, 336 (1-2). pp. 64-71.
Biswas, SK and Singh, Arvind R (2002) Wear of metals-influence of some primary material properties. In: Tribology Letters, 13 (3). pp. 203-207.
Singh, Aravind R and Narasimham, GSVL and Biswas, SK (2002) Estimation of surface temperature of a pin wearing on a disk. In: Tribology Letters, 12 (4). pp. 203-207.
Jayasingh, EM and Tantri, Srikari P and Bhaskaran, TA and Biswas, SK and Ramasesha, Sheela K (2002) Performance of monolithic and TiB2 reinforced MoSi2 in dry sliding contact with steel. In: Materials Letters, 53 (4-5). pp. 379-383.
Biswas, SK (2002) Wear of metals: a consequence of stable/unstable material response. In: Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 216 (J6). 357-369 .
Biswas, SK (2000) Some mechanisms of tribofilm formation in metal/metal and ceramic/metal sliding interactions. In: Wear, 245 (1-2). pp. 178-189.
Dinelli, F and Biswas, SK and Briggs, GAD and Kolosov, OV (2000) Measurements of stiff-material compliance on the nanoscale using ultrasonic force microscopy. In: Physical Review B, 61 (20). pp. 13995-14006.
Ramasesha, Sheela K and Srikari, Tantri P and Jayasingh, Moses E and Biswas, SK (2000) Effect of densification and TiB2 reinforcement on the wear of molybdenum disilicide. In: Tribology Letters, 8 (4). pp. 219-222.
Bobji, MS and Venkatesh, K and Biswas, SK (1999) Roughness generated in surface grinding of metals. In: Journal of Tribology, 121 (4). pp. 746-752.
Kailas, SV and Biswas, SK (1999) Sliding wear of copper against alumina. In: Journal of Tribology, 121 (4). 795-801 .
Bobji, MS and Biswas, SK (1999) Deconvolution of hardness from data obtained from nanoindentation of rough surfaces. In: Journal Of Materials Research, 14 (6). pp. 2259-2268.
Venkatesh, K and Bobji, MS and Gargi, R and Biswas, SK (1999) Genesis of workpiece roughness generated in surface grinding and polishing of metals. In: Wear, 225-22 (1). pp. 215-226.
Bobji, MS and Shivakumar, K and Alehossein, H and Venkateshwarlu, V and Biswas, SK (1999) Influence of surface roughness on the scatter in hardness measurements - a numerical study. In: International Journal of Rock Mechanics and Mining Sciences, 36 (3). pp. 399-404.
Singh, Arvind R and Biswas, SK and Kailas, Satish V (1999) Sliding wear of cadmium against alumina. In: Wear, 225-22 (2). pp. 770-776.
Jayaram, V and Biswas, SK (1999) Wear of $Al_2O_3-SiC-(Al,Si)$ melt oxidised ceramic composites. In: Wear, 225-22 (2). pp. 1322-1326.
Jayaram, V and Biswas, SK (1999) Wear of Al2O3-SiC-(Al,Si) melt oxidised ceramic composites. In: Wear, 225 (part 2). pp. 1322-1326.
Venkatesh, K and Bobji, MS and Biswas, SK (1999) Power spectra of roughness caused by grinding of metals. In: Journal of Materials Research, 14 (2). pp. 319-322.
Singh, RA and Jayaram, V and Biswas, SK (1999) Abrasion of $Al_{2}O_{3}-SiC-(Al,Si)$ composites made by melt oxidation. In: Journal of Materials Research, 14 (1). pp. 64-67.
Bobji, MS and Biswas, SK (1999) Hardness of a surface containing uniformly spaced pyramidal asperities. In: Tribology Letters, 7 (1). pp. 51-56.
Venkatesh, K and Bobji, MS and Biswas, SK (1998) Roughness due to workpiece wear generated in surface grinding of metals. In: Tribology International, 31 (12). pp. 771-778.
Bobji, MS and Biswas, SK (1998) Estimation of hardness by nanoindentation of rough surfaces. In: Journal of Materials Research, 13 (11). pp. 3227-3233.
Venkatesh, K and Bobji, MS and Biswas, SK (1998) Some features of surface topographical power spectra generated by conventional machining of a ductile metal. In: Materials Science and Engineering A, 252 (1). pp. 153-155.
Narasimhan, R and Biswas, SK (1998) A finite element study of the indentation mechanics of an adhesively bonded layered solid. In: International Journal of Mechanical Sciences, 40 (4). pp. 357-370.
Singh, Arvind R and Sood, AK and Jayaram, V and Biswas, SK (1998) Analysis of microresidual stresses in 6H-SiC particles within $Al_2O_3-SiC-(Al,Si)$ CMC using raman spectroscopy. In: Scripta Materialia, 38 (4). pp. 617-622.
Rajendrakumar, PK and Biswas, SK (1997) Deformation due to contact between a two-dimensional rough surface and a smooth cylinder. In: Tribology Letters, 3 (4). pp. 297-301.
Bobji, MS and Biswas, SK and Pethica, JB (1997) Effect of roughness on the measurement of nanohardness—a computer simulation study. In: Applied Physics Letters, 71 (8). pp. 1059-1061.
Ravikiran, A and Jayaram, V and Biswas, SK (1997) Sliding wear of Al2O3-SiC-(Al,Si) composites against a steel counterface. In: Journal of the American Ceramic Society, 80 (1). pp. 219-224.
Kailas, SV and Biswas, SK (1997) Sliding wear of titanium. In: Transactions of the ASME: Journal of Tribology, 119 (1). pp. 31-35.
Rajendrakumar, PK and Biswas, SK (1996) Elastic Contact Between a Cylindrical Surface and a Flat Surface - A non-Hertzian Model of Multi-asperity Contact. In: Mechanics Research Communications, 23 (4). pp. 367-380.
Bobji, MS and Biswas, SK (1996) Determination and study of the strength of the blister field generated by conical indentation. In: Philosophical Magazine A, 73 (2). pp. 399-413.
Briscoe, BJ and Evans, PD and Biswas, SK and Sinha, SK (1996) The hardnesses of poly(methylmethacrylate). In: Tribology International, 29 (2). pp. 93-104.
Asif, SAS and Muthu, DVS and Sood, AK and Biswas, SK (1995) Surface damage of yttria-tetragonal zirconia polycrystals and magnesia-partially-stabilized zirconia in single-point abrasion. In: Journal of the American Ceramic Society, 78 (12). pp. 3357-3362.
Selvan, KA and Biswas, SK (1995) Calculation of elastic pinning strength of semicoherent Y2BaCuO5 precipitates in YBa2Cu3O7. In: Philosophical Magazine Letters, 72 (1). pp. 33-39.
Sinha, SK and Biswas, SK (1995) Effect of sliding speed on friction and wear of uni-directional aramid fibre-phenolic resin composite. In: Journal of Materials Science (full set), 30 (9). pp. 2430-2437.
Kailas, Satish V and Biswas, SK (1995) Strain rate response and its effect in plane strain abrasion of metals by a wedge. In: Wear, 184 (1). pp. 23-32.
Reddy, Somi A and Bai, Pramila BN and Murthy, KSS and Biswas, SK (1995) Mechanism of seizure of aluminium-silicon alloys dry sliding against steel. In: Wear, 181 (part 2). pp. 658-667.
Kailas, Satish V and Biswas, SK (1995) The role of strain rate response in plane strain abrasion of metals. In: Wear, 181 (part 2). pp. 648-657.
Ravikiran, A and Nagarajan, VS and Biswas, SK and Bai, Pramila BN (1995) Effect of Speed and Pressure on Dry Sliding Interactions of Alumina against Steel. In: Journal of the American Ceramic Society, 78 (2). 356-364 .
Selvan, Arul K and Biswas, SK (1994) Effect of anisotropy on dislocations at $YBa_2Cu_30_{7-x}-PrBa_2Cu_30_{7-x}$ epitaxial interfaces. In: Superconductor Science & Technology, 7 (11). pp. 805-811.
Selvan, Arul K and Biswas, SK (1994) Flux pinning due to stress concentration introduced by an ellipsoidal precipitate in a stressed $YBa_2Cu_30_7$ film. In: Physica C, 232 (3-4). pp. 233-240.
Asif, Syed SA and Biswas, SK (1994) The mechanical response of tetragonal zirconia polycrystal to conical indentation. In: Bulletin of Materials Science, 17 (6). 863-873 .
Kailas, SV and Prasad, YVRK and Biswas, SK (1994) Flow Instabilities and fracture in Ti-6Al-4V deformed in compression at 298 K to 673 K. In: Metallurgical and materials transactions a, 25 (10). 2173-2179 .
Kailas, SV and Prasad, YVRK and Biswas, SK (1994) Influence of initial texture on the microstructural instabilities during compression of commercial ?-Titanium at 25 °C to 400 °C. In: Metallurgical and Materials Transactions A, 25 (7). 1425 -1434 .
Nagarajan, VS and Muthu, DVS and Asif, Syed SA and Sood, AK and Biswas, SK (1994) Raman spectroscopic studies of phase transformations induced by a notch cut on a 3Y-TZP sample. In: Materials Science & Engineering A, 174 (2). L37-L40.
Reddy, Somi A and Bai, Pramila BN and Murthy, KSS and Biswas, SK (1994) Wear and seizure of binary Al---Si alloys. In: Wear, 171 (1-2). pp. 115-127.
Kailas, SV and Prasad, YVRK and Biswas, SK (1993) Microstructural features of flow instability in α-titanium cylinders under high strain rate compression at 25°C to 400°C. In: Metallurgical Transactions. Physical Metallurgy and Material, 24 (11). pp. 2513-2520.
Bai, Pramila BN and Haresh, K and Biswas, SK and Bhave, SK (1993) Evolution of and preconditions for generation of corrugations on a plane surface in rolling contact. In: Tribology International, 26 (3). pp. 175-182.
Briscoe, BJ and Biswas, SK and Sinha, SK and Panesar, SS (1993) The scratch hardness and friction of a soft rigid-plastic solid. In: Tribology International, 26 (3). pp. 183-193.
Ghosal, AK and Biswas, SK (1993) Examination of Stress-Fields In Elastic Plastic Indentation. In: Philosophical Magazine Part B: Physics of Condensed Matter. Electronics, Optical and Magnetic Properties, 67 (3). pp. 371-387.
Asif, Syed SA and Somasundaram, P and Umarji, AM and Biswas, SK (1993) Effect of Lanthanum Substitution at the Barium Site on the Mechanical Behaviour in YBCO Superconductor. In: Materials Research Bulletin, 28 (1). pp. 73-80.
Shamasundar, S and Tseng, AA and Aung, W and Biswas, SK (1993) Numerical and experimental study of the thermal behaviour of coining and upsetting processes. In: Journal of Materials Processing Technology, 36 (2). pp. 199-221.
Biswas, S and Bose, SC and Bhave, SK and Bai, Pramila BN and Biswas, SK (1992) Study of corrugations in motor bearings. In: Tribology International, 25 (1). pp. 27-36.
Shamasundar, S and Marathe, AG and Biswas, SK (1991) Effect of process variables on die-billet temperature history in a slow speed hot coining type process. In: Journal of Engineering for Industry-Transactions of the ASME, 113 (4). pp. 362-372.
Mukhopadhy, Ananya and Biswas, SK (1991) Indentation of sintered alumina clay composite - an experimental discussion of a combined Boussinesq and blister stress field approach. In: Philosophical Magazine Letters, 64 (2). pp. 77-82.
Sebastian, S and Biswas, SK (1991) Effect of interface friction on the mechanics of indentation of a finite layer resting on a rigid substrate. In: Journal of Physics D: Applied Physics, 24 (7). pp. 1131-1140.
Bai, Pramila BN and Biswas, SK (1991) Effect of magnesium addition and heat treatment on mild wear of hypoeutectic aluminium-silicon alloys. In: Acta Metallurgica et Materialia, 39 (5). pp. 833-840.
Biswas, SK and Ramesh, M (1991) Study of forging design using slip-line fields. In: Journal of Materials Processing Technology, 25 (1). pp. 1-13.
Asif, Syed SA and Biswas, SK and Bai, Pramila BN (1990) Transfer and transitions in dry sliding wear of copper against steel. In: Scripta Metallurgica et Materialia, 24 (7). pp. 1351-1356.
Ravikiran, A and Natarajan, KN and Biswas, SK and Bai, Pramila BN (1990) Erosion studies on hyper steel and high chrome cast iron. In: Wear, 141 (1). pp. 85-94.
Kumar, Udaya K and Gundappa, Pradeep and Bai, Pramila BN and Natarajan, KA and Biswas, SK (1989) Laboratory studies on the wear of grinding media. In: Tribology International, 22 (3). pp. 219-225.
Srinivas, MV and Alva, P and Biswas, SK (1989) Slip line field analysis of a simple plane strain closed‐die forging. In: Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture, 203 (B2). pp. 91-99.
Bai, Pramila BN and Shamasunder, HS and Biswas, SK (1988) Debris analysis in dry sliding wear of Al-Si alloys. In: Materials Science and Engineering, 104 . L11-L14.
Biswas, SK and Vijayan, Kalyani (1988) Changes to near-surface region of PTFE during dry sliding against steel. In: Journal of Materials Science, 23 (5). pp. 1877-1885.
Bai, Pramila BN and Biswas, SK (1987) Characterization of dry sliding wear of Al---Si alloys. In: Wear, 120 (1). pp. 61-74.
Biswas, SK and Sathiakumar, S and Vithayathil, J (1987) A Current Source Inverter Fed Induction Motor Drive with Power Factor Angle Control Using Microprocessor. In: IEEE Transactions on Industrial Electronics, 34 (4). pp. 441-446.
Biswas, SK and Basak, B and Sathiakumar, S and Vithayathi, J (1987) A New Three-Phase Current Source Inverter with Flexible PWM Capability. In: IEEE Transactions on Industry Applications, 23 (5). pp. 921-926.
Sundar, S Shama and Marathe, AG and Biswas, SK (1987) Temperature characteristics of the billet and the dies in a small batch forging production. In: Journal of Mechanical Working Technology, 15 (2). pp. 203-213.
Biswas, SK and Basak, B and Vithayathil, J (1987) A fast acting detector for abnormal output voltages of an UPS system. In: International Journal of Electronics, 62 (6). 949 -952.
Biswas, SK and Mahesh, MS and lyengar, BSR (1986) Simple new PWM patterns for thyristor three-phase AC/DC convertors. In: IEE Proceedings B: Electric Power Applications, 133 (6). 354 -358.
Sathiakumar, S and Biswas, SK and Vithayathil, Joseph (1986) Microprocessor-Based Field-Oriented Control of A CSI-Fed Induction Motor Drive. In: IEEE Transactions on Industrial Electronics, 33 (1). 39 -43.
Sathiakumar, S and Vithayathil, Joseph and Biswas, SK (1986) Microprocessor-Based Field-Oriented Control of A CSI-Fed Induction Motor Drive. In: IEEE Transactions on Industrial Electronics, IE-33 (1). pp. 39-43.
Bai, BN Pramila and Biswas, SK (1986) Effect of Load on Dry Sliding Wear of Aluminum-Silicon Alloys. In: Tribology Transactions, 29 (1). 116 -120.
Biswas, SK and Rao, KVJ (1985) Flow of metal into the flash gap in the last stages of a plane-strain closed-die forging operation. In: Journal of Mechanical Working Technology, 11 (3). pp. 319-331.
Biswas, SK (1985) Very-high-Q inductor simulation for active tuned filters. In: International Journal of Electronics, 58 (6). 1019 -1023.
Biswas, SK (1985) Monoblock cylinder internally pressurised under asymmetric end constraints Some aspects of design. In: International Journal of Mechanical Sciences, 27 (5). pp. 325-334.
Bai1, BN Pramila and Biswas, SK (1984) Subsurface deformation in dry sliding of hypo-eutectic Al-Si alloys. In: Journal of Materials Science, 19 (11). pp. 3588-3592.
Gopakumar, K and Sathiakumar, S and Biswas, SK and Vithayathil, J (1984) Modified current source inverter fed induction motor drive with reduced torque pulsations. In: Electric Power Applications, IEE Proceedings B, 131 (4). pp. 159-164.
Shamsundar, S and Marathe, AG and Biswas, SK (1984) Development of a computer code to predict cooling of die and billet in forging. In: International Journal of Machine Tool Design and Research, 24 (4). pp. 311-320.
Bai, Pramila BN and Biswas, SK (1983) Scanning electron microscopy study of worn $Al-Si$ alloy surfaces. In: Wear, 87 (3). pp. 237-249.
Bai, BN Pramila and Dwarakadasa, ES and Biswas, SK (1982) Scanning electron microscopy studies of wear in LM13 and LM13-graphite particulate composite. In: Wear, 76 (2). pp. 211-220.
Bai, BN Pramila and Dwarakadasa, ES and Biswas, SK (1981) Subsurface damage in dry wear of Al-Si alloys. In: Wear, 71 (3). pp. 381-384.
Biswas, SK and Pramila Bai, BN (1981) Dry wear of al-graphite particle composites. In: WearWear, 68 (3). pp. 347-358.
Biswasa, SK and Shantharam, A and Rao, NAP and Swamy, K Narayana and Rohatgi, PK and Biswas, SK (1980) Performance of graphic aluminium particulate composite materials. In: Tribology International, 13 (4). pp. 171-176.
Nath, Deo and Biswas, SK and Rohatgi, PK (1980) Wear characteristics and bearing performance of aluminium-mica particulate composite material. In: Wear, 60 (1). pp. 61-73.
Nath, Deo and Bhatt, RT and Biswas, SK (1980) Mechanical Properties of Al-Mica Particulate Composite Material. In: Journal of Engineering Materials and Technology, 102 (1). pp. 78-84.
Rao, TR Raghavendra and Biswas, SK (1979) Experimental investigation of die wear in small-batch hammer-forging under unlubricated conditions. In: Journal of Mechanical Working Technology, 3 (2). pp. 137-150.
Janardhana, MN and Biswas, SK (1979) Modes of deformation in aluminium rings subjected to static axial compression. In: International Journal of Mechanical Sciences, 21 (12). pp. 699-712.
Biswas, SK (1993) Debiprasad Chattopadhyaya - The modern Indian sage. In: Current Science (Bangalore), 65 (11). pp. 889-891.
Mitra, Nibedita and Vijayan, Kalyani and Pramila Bai, BN and Biswas, SK (1993) Phase Transformation Introduced by Mechanical and Chemical Surface Preparations of Tetragonal Zirconia Polycrystals. In: Journal of the American Ceramic Society, 76 (2). pp. 533-535.
