|
 | Up a level |
Yadav, Surekha and Sarkar, S and Aggarwal, Akash and Kumar, Arvind and Biswas, Krishanu (2018) Wear and mechanical properties of novel (CuCrFeTiZn)(100-x)Pb-x high entropy alloy composite via mechanical alloying and spark plasma sintering. In: WEAR, 410 . pp. 93-109.
Lijesh, K P and Khonsari, M M and Kailas, Satish (2018) On the integrated degradation coefficient for adhesive wear: A thermodynamic approach. In: WEAR, 408 . pp. 138-150.
Viswanathan, Koushik and Sundaram, Narayan K (2017) Distinct stick-slip modes in adhesive polymer interfaces. In: WEAR, 376 (B). pp. 1271-1278.
Mahato, Anirban and Yeung, Ho and Guo, Yang and Viswanathan, Koushik and Sundaram, Narayan K and Udupa, Anirudh and Mann, James B and Chandrasekar, Srinivasan (2017) Sinuous flow and folding in metals: Implications for delamination wear and surface phenomena in sliding and cutting. In: WEAR, 376 (B). pp. 1534-1541.
Chaudhry, V and Kailas, Satish V (2015) Damage mechanisms in stainless steel and chromium carbide coatings under controlled environment fretting conditions. In: WEAR, 334 . pp. 75-81.
Chaudhry, V and Simha, KRY and Kailas, Satish V (2014) Energy based approach for the evaluation of damage under partial slip and gross sliding condition. In: WEAR, 315 (1-2). pp. 115-124.
Sharma, Amit Siddharth and Biswas, Krishanu and Basu, Bikramjit (2014) Microstructure-hardness-fretting wear resistance correlation in ultrafine grained Cu-TiB2-Pb composites. In: WEAR, 319 (1-2). pp. 160-171.
Chaudhry, V and Kailas, Satish V (2013) Damage quantification under sliding and seizure condition using first-of-a-kind fretting machine. In: WEAR, 305 (1-2). pp. 140-154.
Chaudhry, V and Kailas, Satish V (2013) Fretting studies on self-mated stainless steel and chromium carbide coated surfaces under controlled environment conditions. In: WEAR, 301 (1-2, S). pp. 524-539.
Sharma, Amit S and Mishra, Nisha and Biswas, Krishanu and Basu, Bikramjit (2013) Fretting wear study of Cu-10 wt% TiB2 and Cu-10 wt% TiB2-10 wt% Pb composites. In: WEAR, 306 (1-2). pp. 138-148.
Devaraju, A and Perumal, Elaya A and Alphonsa, J and Kailas, Satish V and Venugopal, S (2012) Sliding wear behavior of plasma nitrided Austenitic Stainless Steel Type AISI 316LN in the temperature range from 25 to 400 degrees C at 10(-4) bar. In: WEAR, 288 . pp. 17-26.
Karthikeyan, S and Agrawal, A and Rigney, DA (2009) Molecular dynamics simulations of sliding in an Fe-Cu tribopair system. In: 17th International Conference on Wear of Materials, APR 19-23, Las Vegas, NV, pp. 1166-1176.
Mondal, AK and Kumar, S (2009) Dry sliding wear behaviour of magnesium alloy based hybrid composites in the longitudinal direction. In: 17th International Conference on Wear of Materials, JUN 15 2009, Las Vegas, pp. 458-466.
Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2009) Influence of inclination angle of plate on friction, stick-slip and transfer layer-A study of magnesium pin sliding against steel plate. In: 17th International Conference on Wear of Materials, APR 19-23, 2009, Las Vegas, pp. 476-484.
Menezes, Pradeep L and *, Kishore and Kailas, Satish V (2009) Studies on friction and formation of transfer layer when Al-4Mg alloy pins slid at various numbers of cycles on steel plates of different surface texture. In: 17th International Conference on Wear of Materials, APR 19-23, 2009, Las Vegas, pp. 525-534.
Emge, A and Karthikeyan, S and Rigney, DA (2009) The effects of sliding velocity and sliding time on nanocrystalline tribolayer development and properties in copper. In: 17th International Conference on Wear of Materials, APR 19-23, 2009, Las Vegas, pp. 562-567.
Kim, HJ and Karthikeyan, S and Rigney, D (2009) A simulation study of the mixing, atomic flow and velocity profiles of crystalline materials during sliding. In: 17th International Conference on Wear of Materials, 19-23, Las Vegas, NV, pp. 1130-1136.
