|
 | Up a level |
Deogade, BK and Bibhanshu, N and Kalsar, R and Acharyya, SG and Suresh, KS (2023) Constitutive Modelling of Hot Deformation Behaviour of Mg-0.5wt% Ce Alloy. In: Transactions of the Indian Institute of Metals .
Chaitanya, GVA and Gupta, GS (2023) Gas–Liquid-Particle Interaction in the Lower Part of the Blast Furnace. In: Transactions of the Indian Institute of Metals .
John, A and Showket, J and Joseph Babu, K and Edachery, V and Suvin, PS (2023) Micro-tribological Characteristics of Ti6Al4V Alloy Subjected to Shot Blasting Surface Treatment Process. In: Transactions of the Indian Institute of Metals .
Das, P and Sultan, MA (2023) Effect of Strontium Addition on Semi-Solid Slurry Generation of Novel Al�15Mg2Si�4.5Si Composite During Cooling Slope Rheoprocessing. In: Transactions of the Indian Institute of Metals .
Bansal, M and Santhiya, D and Subramanian, S (2023) Role of Surface-Chemistry in Colloidal Processing of Ceramics: A Review. In: Transactions of the Indian Institute of Metals .
Bhure, S and Nalajala, D and Choudhury, A (2023) Toward DS/SX Ni-Based Superalloy Components Using L-DED: A Multi-scale Modeling and Experimental Approach. In: Transactions of the Indian Institute of Metals .
Kumar, D and Harmain, GA and Gaurav, G and Lijesh, KP and Kuriachen, B and Hirani, H and Philip, JT (2022) A Novel Seal Design to Enhance MR Brake Performance. In: Transactions of the Indian Institute of Metals .
Kumar, P and Philip, JT and Wani, MF and Rai, H and Vashishtha, H and Kuriachen, B and Kumar, D (2022) Study of Tribological Properties of EN8 Steel against Inconel X-750 Alloy under Dry and Lubricated Conditions. In: Transactions of the Indian Institute of Metals .
Bansal, U and Chattopadhyay, K (2022) Newer Developments in Aluminium Alloys Through Ordered Precipitates and Segregation of Transition Elements. In: Transactions of the Indian Institute of Metals, 75 (4). pp. 1015-1030.
Zheng, Y and Banerjee, R and Wang, Y and Fraser, H and Banerjee, D (2022) Pathways to Titanium Martensite. In: Transactions of the Indian Institute of Metals, 75 (4). pp. 1051-1068.
Gupta, GS and Lakshminarasimha, S and Shrenik, M (2022) Quantitative Measurement of Powder Holdups in the Packed Beds. In: Transactions of the Indian Institute of Metals, 75 (2). pp. 381-395.
Dishwar, RK and Agrawal, S and Singh, AK and Sinha, OP (2022) Effect of Bath Environment and Charge Material on the Removal of Impurities from the Pig Iron Melt Using Laboratory Scale (2Â kg) Electric Arc Furnace. In: Transactions of the Indian Institute of Metals .
Yadav, TP and Kumbhakar, P and Mukhopadhyay, NK and Galvao, DS and Ajayan, PM and Ranganathan, S and Chattopadhyay, K and SekharTiwary, C (2022) Revisiting Quasicrystals for the Synthesis of 2D Metals. In: Transactions of the Indian Institute of Metals .
Srinivasan, D (2021) Challenges in Qualifying Additive Manufacturing for Turbine Components: A Review. In: Transactions of the Indian Institute of Metals, 74 (5). pp. 1107-1128.
Kamble, S and Lakshminarasimha, S and Maurya, A and Gupta, GS (2020) Validation of Pressure Drop in Gas–Fine Flow in a Packed Bed with Various Types of Injection System (Lateral and Bottom). In: Transactions of the Indian Institute of Metals, 73 (8). pp. 2081-2087.
Olu, FE and Hong, SJ and Chattopadhyay, K (2020) Mechanical and Thermoelectric Properties of Eutectic Composite (Bi, Sb)2Te3/Te Thermoelectric Material. In: Transactions of the Indian Institute of Metals, 73 (5). pp. 1147-1155.
Dishwar, RK and Agrawal, S and Mandal, AK and Sinha, OP (2020) Smelting Process of Chromite Ore Fines to Produce Crude Fe–Cr–Ni–N Alloy. In: Transactions of the Indian Institute of Metals, 73 (3). pp. 537-542.
Bhaskar, MS and Surappa, MK (2019) Effect of Recovery and Recrystallization on the Damping Behaviour of A356/SiC p Composites. In: Transactions of the Indian Institute of Metals, 72 (4). pp. 849-857.
Jalan, SK and Nageswara Rao, B and Narayana Murty, SVS and Gopalakrishnan, S (2019) Evaluation of Elastic Properties for a Nanocomposite (Reinforced with SWCNT Agglomerates) Utilizing a Representative Volume Element. In: Transactions of the Indian Institute of Metals, 72 (4). pp. 951-967.
Kar, A and Kailas, SV and Suwas, S (2019) Effect of Mechanical Mixing in Dissimilar Friction Stir Welding of Aluminum to Titanium with Zinc Interlayer. In: Transactions of the Indian Institute of Metals .
Alam, Md Zafir and Srivathsa, B and Kamat, SV and Jayaram, V and Das, DK (2011) Study of Brittle-to-ductile-transition in Pt-aluminide bond coat using micro-tensile testing method. In: Transactions of the Indian Institute of Metals, 64 (1-2). pp. 57-61.
Barman, N and Dutta, Pradip (2009) Effect of process parameters on transport phenomena during solidification in the presence of electromagnetic stirring. In: Transactions of the Indian Institute of Metals, 62 (4-5). pp. 469-474.
Mukhopadhyay, P and Biswas, S and Chokshi, AH (2009) Deformation characterization of superplastic AA7475 alloy. In: Transactions of the Indian Institute of Metals, 62 (2). pp. 149-152.
Bakshi, S and Chattopadhyay, K and Kumar, S (2006) Novel technique of processing functionally graded material in age-hardenable Al-alloys. In: Transactions of the Indian Institute of Metals, 59 (1). pp. 73-84.
Chattopadhyay, K (2005) Behaviour of Embedded Metals and Alloys at Small Sizes. In: Transactions of the Indian Institute of Metals, 58 (6). pp. 1057-1067.
Ray, A and Bhattacharya, V and Chattopadhyay, K (2005) Evolution of morphology of undercooled droplets in Cu-Cu3p near euteictic alloy. In: Transactions of the Indian Institute of Metals, 58 (4). pp. 761-767.
Jeyakumar, M and Kumar, S (2005) Microstructural evolution of spray formed 7075 Al alloy. In: Transactions of the Indian Institute of Metals, 58 (4). pp. 617-623.
Acharya, S and Hajra, JP (2004) Applicability of a multiparameter formalism in interpreting the thermodynamic behaviour of ternary systems. In: Transactions of the Indian Institute of Metals, 57 (2). pp. 95-102.
Ranganathan, S (2001) Basic-research in engineering materials - Indian perspectives. In: Transactions of the Indian Institute of Metals, 54 (1-2). pp. 1-12.
Chokshi, AH (2000) Superplastic ceramics. In: Creep, Fatigue and Creep-Fatigue Interaction, 20-22 Jan. 1999, Kalpakkam, India, pp. 129-134.
Dattaguru, B (2000) A review of the numerical estimation of crack closure and fatigue crack growth. In: Creep, Fatigue and Creep-Fatigue Interaction, 20-22 Jan. 1999, Kalpakkam, India, pp. 155-164.
Ranganathan, S (1999) IIM presidental address-1999 - Paradigm shifts in metallurgical research and education. In: Transactions of the Indian Institute of Metals, 52 (6). pp. 357-361.
Shukla, AK and Munichandraiah, N and Joshi, SN and Shukla, S (1998) Advances in storage batteries. In: Transactions of the Indian Institute of Metals, 51 (5). pp. 255-260.
Prasad, PM and Subramanian, S (1997) Problems and prospects of red mud utilisation. In: Transactions of the Indian Institute of Metals, 50 (5). pp. 427-442.
Deshpande, RJ and Natarajan, KA and Kittur, SG and Rao, TRR (1997) Reverse flotation of silica from Kudremukh iron ore .1. Selection of cationic reagents. In: Transactions of the Indian Institute of Metals, 50 (5). pp. 391-396.
Deshpande, RJ and Natarajan, KA and Kittur, SG and Rao, TRR (1997) Reverse flotation of silica from Kudremukh iron ore .2. Optimization of flotation process. In: Transactions of the Indian Institute of Metals, 50 (5). pp. 397-402.
Subramanian, S and Natarajan, KA (1997) Special Issue on Mineral Processing - Preface. In: Transactions of the Indian Institute of Metals, 50 (5). U3-U4.
Srinivasan, VS and Valsan, M and Rao, KBS and Mannan, SL and Sastry, DH (1996) Low cycle fatigue behaviour of a nitrogen modified 316L stainless steel at 823 K. In: Workshop on the Phenomena of Creep, Fatigue, and Creep-Fatigue Interactions, FEB 15-17, 1995, KALPAKKAM, INDIA, pp. 489-495.
Ray, SK and Rodriguez, P and Sastry, DH (1993) Deformation dynamics of SS-316 Between 1023-K TO 1223-K In The Framework of Cottrell-Stokes Law. In: Transactions of the Indian Institute of Metals, 46 (1). pp. 31-39.
Ray, SK and Rodriguez, P and Sastry, DH (1993) Method of Analysis if Uniaxial Deformation Data. In: Transactions of the Indian Institute of Metals, 46 (1). pp. 7-19.
Ravichandran, KS and Dwarakadasa, ES (1991) Micromechanics Of Fatigue Crack-Growth At Low Stress Intensities In A High-Strength Steel. In: Transactions of the Indian Institute of Metals, 44 (5). 375 -396.
Srikanth, S and Jacob, KT (1991) Vapor-Pressure Of Calcium Corresponding To The Reduction Of Calcia By Aluminum. In: Transactions of the Indian Institute of Metals, 44 (5). 369 -373.
Saha, RL and Nandy, TK and Misra, RDK and Jacob, KT (1991) Reduction In Metal-Mold Reactivity In Titanium Castings Through The Use Of Sodium Aluminate As Binder In Zircon Sand Molds. In: Transactions of the Indian Institute of Metals, 44 (4). pp. 305-310.
Saha, RL and Mukherji, D and Misra, RDK and Jacob, KT and Nandy, TK (1991) Zircon Sand--a Viable Alternative Moulding System for Titanium Castings. In: Transactions of the Indian Institute of Metals, 44 (1). pp. 53-61.
Ranganathan, S (1990) Coincidence-site lattices, superlattices and quasilattices. In: Transactions of the Indian Institute of Metals, 43 (1). pp. 1-7.
Subramanian, S and Lahiri, AK and Jain, AKNK (1989) Electroslag remelting studies on the simultaneous desulfurization and dephosphorization of En24 steel using sodium carbonate. In: Transactions of the Indian Institute of Metals, 42 (2). pp. 121-125.
Deshpande, RJ and Nayak, UB (1989) Flotation of low-grade phyllite deposits of tungsten from Degana, Rajasthan. In: Transactions of the Indian Institute of Metals, 42 (2). pp. 109-114.
Kannan, C and Subramanian, S and Lahiri, AK (1989) Studies on slag-metal interface in electroslag casting using thermocouples. In: Transactions of the Indian Institute of Metals, 42 (5). pp. 499-502. (Unpublished)
Subramanian, S and Natarajan, KA (1988) Zeta Potential Studies On Some Iron-Ore Minerals In The Presence Of Starches. In: Transactions of the Indian Institute of Metals, 41 (3). pp. 255-263.
Rao, CNR and Edwards, PP (1988) Why Are Certain Substances Metallic (Reprinted From Proc Indian Acad Sci, Chem Sci, Vol 96, Pg 473-498, 1986). In: Transactions of the Indian Institute of Metals, 41 (2). 103 -120.
Mandre, NR and Natarajan, KA (1987) Environmental aspects of bacterial oxidation with respect to the mining and processing of some sulfide minerals. In: Transactions of the Indian Institute of Metals, 40 (2). pp. 128-136.
Jacob, KT (1987) Kinetics of Sulphation of Nickel and Cobalt Ferrites with Na$O, Melt Containing F'e3+ Ions. In: Transactions of the Indian Institute of Metals, 40 (5). pp. 383-388.
Subramanian, S and Natarajan, KA (1987) Selective flocculation studies on iron ore minerals. In: Transactions of the Indian Institute of Metals, 40 (6). pp. 489-496.
Mohanty, Bani P and Subramanian, S and Hajra, JP (1986) Electro slag refining of commercial aluminum. In: Transactions of the Indian Institute of Metals, 39 (6). pp. 646-647.
Rao, M and Yelloji, K and Natarajan, KA (1986) Electrochemical behavior of sulfide minerals under open-circuit conditions. In: Transactions of the Indian Institute of Metals, 39 (6). pp. 582-591.
Jacob, KT and Hajra, JP (1986) Electromagnetic levitation study of sulfur in liquid iron, nickel, and iron-nickel alloys. In: Transactions of the Indian Institute of Metals, 39 (1). pp. 62-69.
Natarajan, KA and Upadhyaya, Ramesh (1986) Flocculation studies on iron ore fines using synthetic polymeric flocculants. In: Transactions of the Indian Institute of Metals, 39 (6). pp. 627-636.
Sastry, DH and Murthy, Gunturi S (1986) Impression creep behavior of metals at high temperatures. In: Transactions of the Indian Institute of Metals, 39 (4). pp. 369-379.
Hajra, JP and Venkatraman, M and Ranganathan, S (1986) Thermodynamics and phase equilibria in the Co-Ni-Mn system. In: Transactions of the Indian Institute of Metals, 39 (3). pp. 211-218.
Pandit, Shashidhara S and Jacob, KT (1986) Vanadium-oxygen equilibrium in liquid cobalt at 1873 K. In: Transactions of the Indian Institute of Metals, 39 (6). pp. 556-561.
Ramesh, R and Ravikumar, K and Kishore, * (1986) Wear of En 31 steel. In: Transactions of the Indian Institute of Metals, 39 (4). pp. 329-334.
Jain, NK and Nair, Krishnadas CG and Abraham, KP and Prasad, YVRK (1984) Hot torsional study of electroslag refined RR 58. In: Transactions of the Indian Institute of Metals, 37 (5). pp. 493-497.
Prasad, YVRK (1984) Texture-dependent mechanical properties of metals and alloys. In: Transactions of the Indian Institute of Metals, 37 (4). pp. 399-410.
Bhat, MV and Vasu, KI (1983) Strain rate sensitivity of stress corrosion cracking in aluminum-5% copper and aluminum-5% zinc alloys containing titanium. In: Transactions of the Indian Institute of Metals, 36 (2). pp. 101-105.
Radhakrishnan, K and Seshan, S and Seshadri, MR (1981) Effect Of Porosity On Mechanical-Properties Of Aluminum-Alloy Castings. In: Transactions of the Indian Institute of Metals, 34 (2). pp. 169-171.
Murthy, GS and Sastry, DH (1981) Impression Creep And High-Temperature Deformation Mechanism In Cadmium. In: Transactions of the Indian Institute of Metals, 34 (3). pp. 195-201.
Tamhankar, RV (1980) Emerging trends in super-alloy processing and applications. In: Transactions of the Indian Institute of Metals, 33 (2). 101-112 .
Shah, MM and Srinivasan, MN and Seshadri, MR (1980) On standardization of slurry for investment shells using indigenous materials. In: Transactions of the Indian Institute of Metals, 33 (4). pp. 306-310.
Jacob, KT (1979) Correlations between structure and thermodynamic properties of spinels and their applications in technology. In: Transactions of the Indian Institute of Metals, 32 . pp. 470-484.
Reddy, KS and Khan, RH and Murthy, KSS (1979) Application of Ultrasonics in Determining the Structural and Mechanical Properties of Cast Iron. In: Transactions of the Indian Institute of Metals, 32 (4). pp. 337-343.
Banerjee, DK and Krishnan, RV and Vasu, KI (1978) Microstructure and Phase-Relations In the Ti-mo-al System. In: Transactions of the Indian Institute of Metals, 31 (5-6). p. 299.
Surappa, MK and Rohatgi, PK (1978) Properties of Aluminum-Graphite Particle Composites Made using Copper Coated Graphite. In: Transactions of the Indian Institute of Metals, 31 (5-6). p. 488.
