|
 | Up a level |
Rao, P and Singh, S and Kumar, K and Pandel, U and Srivastava, C (2023) Understanding the evolution of microstructure, phase homogeneity, electrochemical characteristics and surface chemistry of electrodeposited MnCrCoFeNiCu high entropy alloy coating with reinforcement of carbon nanotubes. In: Surface and Coatings Technology, 471 .
Jangde, A and Kumar, S and Blawert, C (2022) Role of glycerine on formation & corrosion characteristic of PEO layer formed over Mg alloy in a high-concentrated mixed silicate-phosphate-based electrolyte. In: Surface and Coatings Technology, 450 .
Aliyu, A and Srivastava, C (2022) Phase constitution, surface chemistry and corrosion behavior of electrodeposited MnFeCoNiCu high entropy alloy-graphene oxide composite coatings. In: Surface and Coatings Technology, 429 .
Sai Jyotheender, K and Punith Kumar, MK and Srivastava, C (2021) Influence of surfactant polarity on the evolution of micro-texture, grain boundary constitution and corrosion behavior of electrodeposited Zn coatings. In: Surface and Coatings Technology, 423 .
Aliyu, A and Sai Jyotheender, K and Srivastava, C (2021) Texture and grain boundary engineering in nickel coating with tungsten addition and its effect on the coating corrosion behavior. In: Surface and Coatings Technology, 412 .
Lakshmi, RV and Sampath, S and Aruna, ST (2021) Silica-alumina based sol-gel coating containing cerium oxide nanofibers as a potent alternative to conversion coating for AA2024 alloy. In: Surface and Coatings Technology, 411 .
Pillai, AM and Rajendra, A and Sharma, AK and Bera, P and Poornima, S and Sampath, S (2021) Development of vanadium impregnated flat absorber composite PEO coating on AA6061 alloy. In: Surface and Coatings Technology, 410 .
Kumawat, MK and Sarkar, R and Jayaram, V and Alam, MZ (2021) Fatigue behavior of a freestanding Pt-aluminide (PtAl) bond coat at ambient temperature. In: Surface and Coatings Technology, 427 .
Rekha, MY and Nousheen, N and Samad, R and Srivastava, C (2020) Microstructural engineering of ZnCr coating by incorporation of graphene oxide and its effect on the corrosion behaviour of the coating. In: Surface and Coatings Technology, 403 .
Arora, S and Sharma, B and Srivastava, C (2020) ZnCo-carbon nanotube composite coating with enhanced corrosion resistance behavior. In: Surface and Coatings Technology, 398 .
Aliyu, A and Srivastava, C (2020) Correlation between growth texture, crystallite size, lattice strain and corrosion behavior of copper-carbon nanotube composite coatings. In: Surface and Coatings Technology .
Ranganatha, S and Venkatesha, TV and Vathsala, K and kumar , MKP (2012) Electrochemical studies on Zn/nano-CeO 2 electrodeposited composite coatings. In: Surface and Coatings Technology, 208 . pp. 64-72.
Krishnan, R and David, C and Ajikumar, PK and Dash, S and Tyagi, AK and Jayaram, V and Raj, Baldev (2011) Reactive pulsed laser deposition and characterization of niobium nitride thin films. In: Surface and Coatings Technology, 206 (6). pp. 1196-1202.
Potnis, Prashant and Holtzinger, Jennifer and Das, Dipak and Jayaram, Vikram and Biswas, SK (2009) Study of fracture behaviour of bond coats on nickel superalloy by three-point bending of microbeams. In: Surface and Coatings Technology, 204 (5). pp. 586-592.
Hazra, M and Mondal, AK and Kumar, S and Blawert, C and Dahotre, Narendra B (2009) Laser surface cladding of MRI 153M magnesium alloy with (Al+Al2O3). In: Surface and Coatings Technology, 203 (16). pp. 2292-2299.
Shetty, Kishora and Kumar, S and Rao, Raghothama P (2009) Effect of ion nitriding on the microstructure and properties of Maraging steel (250 Grade). In: Surface and Coatings Technology, 203 (10-11). pp. 1530-1536.
Saravanan, S and Srinivas, Hari G and Jayaram, V and Paulraj, M and Asokan, S (2008) Synthesis and characterization of $Y_3Al_5O_{12}$ and $ZrO_2–Y_2O_3$ thermal barrier coatings by combustion spray pyrolysis. In: Surface and Coatings Technology, 202 (19). pp. 4653-4659.
Kavitha, R and Jayaram, V (2007) Deposition and characterization of alumina films produced by combustion flame pyrolysis. In: Surface and Coatings Technology, 201 (6). pp. 2491-2499.
Singh, MP and Shivashankar, SA (2002) Low-pressure MOCVD of Al2O3 films using aluminium acetylacetonate as precursor: nucleation and growth. In: Surface and Coatings Technology, 161 (2-3). pp. 135-143.
Mukhopadhyay, Sukanya and Shalini, K and Lakshmi, R and Devi, Anjana and Shivashankar, SA (2002) Metalorganic chemical vapor deposition of Cu films from bis(t-butyl-3-oxo-butanoato)copper(II): thermodynamic investigation and experimental verification. In: Surface and Coatings Technology, 150 (2-3). pp. 205-211.
