Browse by Journal / Conference

Phanendra Kumar, A and Harursampath, D and Ponnusami, SA (2024) A novel engineered sandwich composite with ceramic-coated graphite fibre-reinforced face sheets and an auxetic core for enhanced broadband electromagnetic absorption: design using multiscale computational analysis. In: Smart Materials and Structures, 33 (11).

Phanendra Kumar, A and Nakka, R and Harursampath, D and A Ponnusami, S (2023) Computational evaluation of absorption characteristics of ceramic-based auxetic materials in X-band frequency range. In: Smart Materials and Structures, 32 (10).

Nagarajan, B and Dutta, S and Pratap, R (2020) Development and performance evaluation of a piezoceramic coated flapping wing. In: Smart Materials and Structures, 29 (11).

Shivashankar, P and Gopalakrishnan, S (2020) Review on the use of piezoelectric materials for active vibration, noise, and flow control. In: Smart Materials and Structures, 29 (5).

Shivashankar, P and Gopalakrishnan, S (2020) Design, modeling and testing of d33-mode surface-bondable multilayer piezoelectric actuator. In: Smart Materials and Structures, 29 (4).

Anuja, J and Narasimhan, R and Ramamurty, U (2019) Effects of superelasticity and plasticity on the spherical indentation response of shape memory alloys: A finite element analysis. In: Smart Materials and Structures, 28 (3). 035028.

Anuja, J and Narasimhan, R and Ramamurty, U (2019) Effects of superelasticity and plasticity on the spherical indentation response of shape memory alloys: A finite element analysis. In: Smart Materials and Structures, 28 (3).

Shastry, Vyasa V (2013) Temperature dependence of indentation recovery ratios in austenitic and martensitic shape memory alloys. In: Smart Materials and Structures, 22 (7). 077002_1-077002_5.

Dutta, Rajdeep and Ganguli, Ranjan and Mani, V (2011) Swarm intelligence algorithms for integrated optimization of piezoelectric actuator and sensor placement and feedback gains. In: Smart Materials and Structures, 20 (10).

Gangadharan, R and Bhat, MR and Murthy, CRL and Gopalakrishnan, S (2010) A geodesic-based triangulation technique for damage location in metallic and composite plates. In: Smart Materials and Structures, 19 (11).

Anand, SV and Arvind, K and Bharath, P and Mahapatra, D Roy (2010) Energy harvesting using ionic electro-active polymer thin films with Ag-based electrodes. In: Smart Materials and Structures, 19 (4).

Anand, Sandeep V and Mahapatra, D Roy (2009) Quasi-static and dynamic strain sensing using carbon nanotube/epoxy nanocomposite thin films. In: Smart Materials and Structures, 18 (4).

Viswamurthy, SR and Rao, AK and Ganguli, R (2007) Dynamic hysteresis of piezoceramic stack actuators used in helicopter vibration control: experiments and simulations. In: Smart Materials and Structures, 16 (4). pp. 1109-1119.

Ramamoorthy, K and Kumar, K and Koinkar, Pankaj and Ganesan, K and Shah, Amit P and Sankaranarayanan, K and Ramasamy, P (2007) A novel in situ method for simultaneous growth of smart material single crystals and thin films. In: Smart Materials and Structures, 16 (1). pp. 83-88.

Mitra, Mira and Gopalakrishnan, S (2006) Wave propagation analysis in carbon nanotube embedded composite using wavelet based spectral finite elements. In: Smart Materials and Structures, 15 (1). pp. 104-122.

Ali, R and Mahapatra, Roy D and Gopalakrishnan, S (2005) Constrained piezoelectric thin film for sensing of subsurface cracks. In: Smart Materials and Structures, 14 . pp. 376-386.

Thakkar, Dipali and Ganguli, Ranjan (2004) Helicopter vibration reduction in forward flight with induced-shear based piezoceramic actuation. In: Smart Materials and Structures, 13 (3). 599-608.

Suresh, S and Omkar, SN and Ganguli, Ranjan and Mani, V (2004) Identification of crack location and depth in a cantilever beam using a modular neural network approach. In: Smart Materials and Structures, 13 . pp. 907-915.

Mitra, Mira and Gopalakrishnan, S and Bhat, Seetharama M (2004) Vibration control in a composite box beam with piezoelectric actuators. In: Smart Materials and Structures, 13 . pp. 676-690.

Sastry, CVS and Mahapatra, Roy D and Gopalakrishnan, S and Ramamurthy, TS (2003) Effect of the actuation phase on the SIF in delaminated composites with embedded piezoelectric layers. In: Smart Materials and Structures, 12 (4). pp. 602-611.

Reddy, Roopesh Kumar R and Ganguli, Ranjan (2003) Structural damage detection in a helicopter rotor blade using radial basis function neural networks. In: Smart Materials and Structures, 12 (2). pp. 232-241.

Nag, A and Mahapatra, Roy D and Gopalakrishnan, S (2002) Identification of delamination in composite beams using spectral estimation and a genetic algorithm. In: Smart Materials and Structures, 11 (6). pp. 899-908.

Mahapatra, Roy D and Gopalakrishnan, S and Balachandran, B (2001) Active feedback control of multiple waves in helicopter gearbox support struts. In: Smart Materials and Structures, 10 (5). pp. 1046-1048.

Sharma, Reena and Balakrishnan, N (1998) Scattering of electromagnetic waves from arbitrary shaped bodies coated with a chiral material. In: Smart Materials and Structures, 7 (6). pp. 851-866.