Browse by Journal / Conference

Tiwary, CS and Kashyap, S and Chattopadhyay, K (2013) Effect of indium addition on microstructural, mechanical and oxidation properties of suction cast Nb-Si eutectic alloy. In: Materials Science and Technology, 29 (6). pp. 702-709.

Patil, RG and Chatpalli, V and Kannan, KR (2010) Study on Young's modulus and microhardness of carbon nanotubes reinforced copper nanocomposite. In: Materials Science and Technology, 26 (4). pp. 478-481.

Sivaprasad, PV and Mannan, SL and Prasad, YVRK (2004) Processing Parameters for the Mechanical Working of 9 Cr-1 Mo Steel: Processing Maps Approach. In: Materials Science and Technology, 20 (12). pp. 1545-1550.

Phaniraj, MP and Lahiri, AK (2004) Constitutive model for vanadium microalloyed steel under hot working conditions. In: Materials Science and Technology, 20 (9). pp. 1151-1157.

Phaniraj, MP and Lahiri, AK (2004) Constitutive modelling of carbon and alloy steels. In: Materials Science and Technology, 20 (3). pp. 335-338.

Kumar, S and Shabadi, R and Patel, MM (2003) Influence of precipitation on serrated flow in Al – 5Zn–1Mg alloy. In: Materials Science and Technology, 19 (10). pp. 1344-1348.

Jacob, Thomas K and Lwin, Kay Thi and Waseda, Yoshio (2002) High temperature phase chemistry of system Eu-Pd-O. In: Materials Science and Technology, 18 (10). pp. 1063-1071.

Gupta, GS and Chaudhuri, A and Kumar, PV (2002) Modelling, simulation, and graphical user interface for industrial gas carburising process. In: Materials Science and Technology, 18 (10). pp. 1188-1194.

Chakraborty, S and Dutta, P (2002) Scaling analysis of momentum, heat, and mass transfer in binary alloy solidification problems. In: Materials Science and Technology, 18 (6). 600-606 .

Laha, K and Latha, S and Rao, Bhanu Sankara K and Mannan, SL and Sastry, DH (2001) Comparison of creep behaviour of 2.25Cr-1Mo/9Cr - 1Mo dissimilar weld joint with its base and weld metals. In: Materials Science and Technology, 17 (10). pp. 1265-1272.

Balasubrahmanyam, VV and Prasad, YVRK (2001) Hot deformation mechanisms in metastable beta titanium alloy Ti-10V-2Fe-3Al. In: Materials Science and Technology, 17 (10). pp. 1222-1228.

Dutta, B and Samajdar, I and Surappa, MK (1998) Particle redistribution and matrix microstructure evolution during hot extrusion of cast SiCp reinforced aluminium alloy matrix composites. In: Materials Science and Technology, 14 (1). pp. 36-46.

Buni, SY and Raman, N and Seshan, S (1997) Effect of spatial distribution of graphite and matrix on dry sliding wear of cast irons. In: Materials Science and Technology, 13 (9). pp. 749-753.

Sagar, PK and Banerjee, D and Prasad, YVRK (1997) Unstable flow during hot deformation of Ti-24Al-20Nb alloy. In: Materials Science and Technology, 13 (9). pp. 755-760.

Murali, S and Muthukkaruppan, S and Raman, KS and Murthy, KSS (1997) Stir cast and extruded Al-7Si-0.3Mg alloy containing iron and beryllium. In: Materials Science and Technology, 13 (4). pp. 337-442.

Venugopal, S and Vasudevan, M and Venugopal, Sridhar and Sivaprasad, PV and Jha, SK and Pandey, P and Mannan, SL and Prasad, YVRK (1996) Industrial validation of processing maps of 316L stainless steel using hot forging, rolling, and extrusion. In: Materials Science and Technology, 12 (11). pp. 955-962.

Chakravartty, JK and Dey, GK and Banerjee, S and Prasad, YVRK (1996) Dynamic recrystallisation during hot working of Zr-2 center dot 5Nb: Characterisation using processing maps. In: Materials Science and Technology, 12 (9). pp. 705-716.

Sundararaman, D and Raghunathan, VS and Ranganathan, S (1995) Correlation of resistivity and microstructure in dilute titaniulll–nitrogen alloy. In: Materials Science and Technology, 11 (8). pp. 729-733.

Srinivasan, N and Prasad, YVRK (1994) Processing map for hot working of Ni–16Cr–8Fe alloy (IN 600). In: Materials Science and Technology, 10 (5). 377-383 .

Ray, SK and Sasikala, G and Rodriguez, P and Sastry, DH (1993) Continuity of plastic strain rate in stress relaxation tests. In: Materials Science and Technology, 9 (12). pp. 1079-1085.

Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Criteria for prediction of flow instabilities and microstructural manifestations during warm working of AISI 304L stainless steel. In: Materials Science and Technology, 9 (11). pp. 1021-1030.

Venugopal, S and Mannan, SL and Prasad, YVRK (1993) Processing map for hot working of stainless steel type AISI 316L. In: Materials Science and Technology, 9 (10). pp. 899-906.

Sivakesavam, O and Rao, IS and Prasad, YVRK (1993) Processing map for hot working of as cast magnesium. In: Materials Science and Technology, 9 (9). pp. 805-810.

Kashyap, KT and Murali, S and Raman, KS and Murthy, KSS (1993) Casting and heat treatment variables of Al–7Si–Mg alloy. In: Materials Science and Technology, 9 (3). pp. 189-203.

T, Chandrasekaran and *, Kishore (1992) Grinding abrasive wear and associated particle size effect. In: Materials Science and Technology, 8 (8). pp. 722-727.

Srinivasan, N and Prasad, YVRK (1992) Characterisation of dynamic recrystallisation in nickel using processing map for hot deformation. In: Materials Science and Technology, 8 (3). pp. 206-212.

Padmavardhani, D and Prasad, YVRK (1991) Effect of zinc content on processing map for hot deformation of beta brass. In: Materials Science and Technology, 7 (10). pp. 947-953.

Srikanth, S and Jacob, KT (1989) Thermodynamic properties of copper-nickel alloys: measurements and assessment. In: Materials Science and Technology, 5 (5). pp. 427-434.