Browse by Journal / Conference

Dixit, S and Dash, BB and Kumar, D and Bhattacharjee, A and Sankaran, S (2023) Influence of phase morphology, static recrystallization, and crystallographic texture on room temperature tensile properties of Ti–6Al–4V alloy: Comparison between post-tested equiaxed, bimodal, and lamellar microstructures. In: Materials Science and Engineering A, 873 .

Hijazi, F and Roy, B and Srinivasan, D and Jayaram, V and Kumar, P (2023) Non-uniform mechanical behaviour of uniaxially rolled Ti–6Al–4V with micro-texture regions. In: Materials Science and Engineering A, 869 .

Sankaran, S and Madhavan, R and Suwas, S and Ray, RK and Padmanabhan, KA (2022) Microstructural evolution and stability during strain-controlled fatigue in a multiphase microalloyed steel. In: Materials Science and Engineering A, 861 .

Roy, S and Sharma, A and Chaudhuri, A and Huang, Y and Langdon, TG and Suwas, S (2022) Microstructure evolution and mechanical response of a boron-modified Ti–6Al–4V alloy during high-pressure torsion processing. In: Materials Science and Engineering A, 860 .

Kalsar, R and Sanamar, S and Schell, N and Brokmeier, H-G and Saha, R and Ghosh, P and Suwas, S (2022) In-situ study of tensile deformation behaviour of medium Mn TWIP/TRIP steel using synchrotron radiation. In: Materials Science and Engineering A, 857 .

Sharma, A and Dixit, S and Baler, N and Agrawal, P and Makineni, SK and Chattopadhyay, K (2022) Impact of boron as an alloying addition on the microstructure, thermo-physical properties and creep resistance of a tungsten-free Co-base γ/γ′ superalloy. In: Materials Science and Engineering A, 855 .

Arya, A and Suwas, S and Chokshi, AH (2022) Strengthening in tension and weakening in torsion in drawn nickel microwires. In: Materials Science and Engineering A, 856 .

He, J and Li, N and Makineni, SK and Zhao, Y and Liu, W and Wang, L and Wang, Z and Song, M (2022) Effects of minor Nb alloying on the thermal stability and mechanical responses of a γ/γ′ type high-entropy alloy with high Fe content. In: Materials Science and Engineering A, 851 .

Panigrahi, A and Acharya, TS and Sengupta, P and Kumar, D and Sarangi, L and Kumar, N and Debasish, D and Suwas, S and Basu, S and Debata, M (2022) Microstructure and mechanical properties of novel tungsten heavy alloys prepared using FeNiCoCrCu HEA as binder. In: Materials Science and Engineering A, 832 .

Verma, KK and Kumar, S and Suwas, S (2021) Evolution of microstructure and texture during hot rolling and subsequent annealing of the TZ73 magnesium alloy and its influence on tensile properties. In: Materials Science and Engineering A, 821 .

Ghosh, S and Bibhanshu, N and Suwas, S and Chatterjee, K (2021) Surface mechanical attrition treatment of additively manufactured 316L stainless steel yields gradient nanostructure with superior strength and ductility. In: Materials Science and Engineering A, 820 .

Kumar, D and Shankar, G and Prashanth, KG and Suwas, S (2021) Texture dependent strain hardening in additively manufactured stainless steel 316L. In: Materials Science and Engineering A, 820 .

Sinha, S and Sahu, VK and Beura, V and Sonkusare, R and Kalsar, R and Das, AKL and Basu, J and Gurao, NP and Biswas, K (2021) Initial texture dependence of nanocrystalline omega phase formation during high pressure torsion of commercially pure titanium. In: Materials Science and Engineering A, 802 .

Mishra, S and Suresh, M and More, AM and Bisht, A and Nayan, N and Suwas, S (2021) Texture control to reduce yield strength anisotropy in the third generation aluminum-copper-lithium alloy: Experiments and modeling. In: Materials Science and Engineering A, 799 .

Balachandran, S and Mishra, RS and Banerjee, D (2020) Friction stir processing of a metastable β titanium alloy in β and α+β phase fields. In: Materials Science and Engineering A, 772 .

Kalsar, R and Yadav, D and Sharma, A and Brokmeier, HG and May, J and Höppel, HW and Skrotzki, W and Suwas, S (2020) Effect of Mg content on microstructure, texture and strength of severely equal channel angular pressed aluminium-magnesium alloys. In: Materials Science and Engineering A, 797 .

Singh, MP and Makineni, SK and Chattopadhyay, K (2020) Achieving lower mass density with high strength in Nb stabilised γ/γ′ Co–Al–Mo–Nb base superalloy by the replacement of Mo with V. In: Materials Science and Engineering A, 794 .

Sonkusare, R and Biswas, K and Al-Hamdany, N and Brokmeier, HG and Kalsar, R and Schell, N and Gurao, NP (2020) A critical evaluation of microstructure-texture-mechanical behavior heterogeneity in high pressure torsion processed CoCuFeMnNi high entropy alloy. In: Materials Science and Engineering A, 782 .

Prasad, Eswar K and Ramamurty, U (2012) Effect of temperature on the plastic zone size and the shear band density in a bulk metallic glass. In: Materials Science and Engineering A, 535 . pp. 48-52.

Raghavan, R and Kombaiah, B and Doebeli, M and Erni, R and Ramamurty, U and Michler, J (2012) Nanoindentation response of an ion irradiated Zr-based bulk metallic glass. In: Materials Science and Engineering A, 532 . pp. 407-413.

Shabadi, R and Suwas, S and Kumar, S and Roven, HJ and Dwarkadasa, ES (2012) Texture and formability studies on AA7020 Al alloy sheets. In: Materials Science and Engineering A .

Thirumurugan, M and Kumaran, S and Suwas, Satyam and Rao, Srinivasa T (2011) Effect of rolling temperature and reduction in thickness on microstructure and mechanical properties of ZM21 magnesium alloy and its subsequent annealing treatment. In: Materials Science and Engineering A, 528 (29-30). pp. 8460-8468.

Pal, Soupitak and Verma, Nisha and Jayaram, Vikram and Biswas, Sanjay Kumar and Riddle, Yancy (2011) Characterization of phase transformation behaviour and microstructural development of electroless Ni-B coating. In: Materials Science and Engineering A, 528 (28). pp. 8269-8276.

Gurao, NP and Sethuraman, S and Suwas, Satyam (2011) Effect of strain path change on the evolution of texture and microstructure during rolling of copper and nickel. In: Materials Science and Engineering A, 528 (25-26). pp. 7739-7750.

Rajaram, G and Kumaran, S and Suwas, Satyam (2011) Effect of strain rate on tensile and compression behaviour of Al-Si/graphite composite. In: Materials Science and Engineering A, 528 (19-20). pp. 6271-6278.

Biswas, Somjeet and Suwas, Satyam and Sikand, R and Gupta, Anil K (2011) Analysis of texture evolution in pure magnesium and the magnesium alloy AM30 during rod and tube extrusion. In: Materials Science and Engineering A, 528 (10-11). pp. 3722-3729.

Panicker, MRR and Chokshi, AH (2011) Influence of grain size on high temperature fracture in a Mg AZ31 alloy. In: Materials Science and Engineering A, 528 (7-8). pp. 3031-3036.

Biswas, P and Narasimhan, R and Tewari, A (2011) Influence of crack tip constraint on void growth in ductile FCC single crystals. In: Materials Science and Engineering A, 528 (3). pp. 823-831.

Roy, Shibayan and Singh, Satyaveer D and Suwas, Satyam and Kumar, S and Chattopadhyay, K (2011) Microstructure and texture evolution during accumulative roll bonding of aluminium alloy AA5086. In: Materials Science and Engineering A, 528 (29-30). pp. 8469-8478.

Giri, Sushi K and Krishnan, Madangopal and Ramamurty, U (2010) Enhancement of fatigue life of Ni-Ti-Fe shape memory alloys by thermal cycling. In: Materials Science and Engineering A, 528 (1). pp. 363-370.

Alam, Md Zafir and Chatterjee, D and Kamat, SV and Jayaram, V and Das, DK (2010) Evaluation of ductile-brittle transition temperature (DBTT) of aluminide bond coats by micro-tensile test method. In: Materials Science and Engineering A, 527 (26). pp. 7147-7150.

Sen, Indrani and Kottada, Ravi Sankar and Ramamurty, U (2010) High temperature deformation processing maps for boron modified Ti-6Al-4V alloys. In: Materials Science and Engineering A, 527 (23). pp. 6157-6165.

Garg, Rohini and Ranganathan, S and Suwas, Satyam (2010) Effect of mode of rolling on development of texture and microstructure in two-phase (alpha plus beta) brass. In: Materials Science and Engineering A, 527 (18-19). pp. 4582-4592.

Mondal, A and Fechner, D and Kumar, S and Dieringa, H and Maier, P and Kainer, KU (2010) Interrupted creep behaviour of Mg alloys developed for powertrain applications. In: Materials Science and Engineering A, 527 (9). pp. 2289-2296.

Azeem, MA and Tewari, A and Ramamurty, U (2010) Effect of recrystallization and grain growth on the mechanical properties of an extruded AZ21 Mg alloy. In: Materials Science and Engineering A, 527 (4-5). pp. 898-903.

Alam, Md Zafir and Srivathsa, B and Kamat, SV and Jayaram, V and Hazari, N and Das, DK (2010) Mechanism of failure in a free-standing Pt-aluminide bond coat during tensile testing at room temperature. In: Materials Science and Engineering A, 527 (3). pp. 842-848.

Nayan, Niraj and Buravalla, V and Ramamurty, U (2009) Effect of mechanical cycling on the stress-strain response of a martensitic Nitinol shape memory alloy. In: Materials Science and Engineering A, 525 (1-2). pp. 60-67.

Suwas, Satyam and Massion, R Arruffat and Toth, LS and Fundenberger, JJ and Beausir, B (2009) Evolution of texture during equal channel angular extrusion of commercially pure aluminum: Experiments and simulations. In: Materials Science and Engineering A, 520 (1-2). pp. 134-146.

Sen, Geetha and Sampathkumaran, P and Nadig, DS and Manjunatha, R and Seetharamu, S (2009) Effect of residual stresses and metallographic stability on the over all performance of integral diaphragm material. In: Materials Science and Engineering A, 517 (1-2). pp. 85-90.

Nayan, N and Roy, D and Buravalla, V and Ramamurty, U (2008) Unnotched fatigue behavior of an austenitic Ni-Ti shape memory alloy. In: Materials Science and Engineering A, 497 (1-2). pp. 333-340.

Roy, Debdutta and Buravalla, V and Mangalgiri, PD and Allegavi, S and Ramamurty, U (2008) Mechanical characterization of NiTi SMA wires using a dynamic mechanical analyzer. In: Materials Science and Engineering A, 494 (1-2). pp. 429-435.

Chatterjee, S and Abinandanan, TA and Chattopadhyay, K (2008) Phase formation in Ti/Ni dissimilar welds. In: Materials Science and Engineering A, 490 (1-2). pp. 7-15.

Srinivasan, N and Prasad, YVRK and Rao, P Rama (2008) Hot deformation behaviour of Mg–3Al alloy—A study using processing map. In: Materials Science and Engineering A, 476 (1-2). pp. 146-156.

Raju, KSS Eswar and Bysakh, S and Sumesh, MA and Kamat, SV and Mohan, S (2008) The effect of ageing on microstructure and nanoindentation behaviour of dc magnetron sputter deposited nickel rich NiTi films. In: Materials Science and Engineering A, 476 (1-2). pp. 267-273.

Phaniraj, MP and Prasad, MJNV and Chokshi, AH (2007) Grain-size distribution effects in plastic flow and failure. In: Materials Science and Engineering A, 463 (1-2). pp. 231-237.

Prabhu, D and Ganesan, K and Narayanasamy, A and Chattopadhyay, K and Ponpandian, N (2007) Magnetic properties of amorphous $Fe_{73.5}Cu_1Mo_3Si_{12.5}Al_1B_9$ alloy. In: Materials Science and Engineering A, 449-45 . pp. 452-455.

Bhattacharya, Victoria and Chattopadhyay, Kamanio (2007) Melting of multiphase nano-scaled particles embedded in Al matrix: Case of Pb–Sn and Bi–Sn alloys. In: Materials Science and Engineering A, 449-45 . pp. 1003-1008.

Biswas, Krishanu and Phanikumar, Gandham and Herlach, Dieter M and Chattopadhyay, Kamanio (2007) Non-equilibrium solidification of concentrated Fe–Ge alloys. In: Materials Science and Engineering A, 449-45 . pp. 12-17.

De, Joyita and Umarji, AM and Chattopadhyay, K (2007) Origin of contamination and role of mechanochemistry during mechanical alloying: the case of Ag–Te alloys. In: Materials Science and Engineering A, 449-45 . pp. 1062-1066.

Menezes, Pradeep L and Kishore, * and Kailas, Satish V (2006) Effect of directionality of unidirectional grinding marks on friction and transfer layer formation of Mg on steel using inclined scratch test. In: Materials Science and Engineering A, 429 (1-2). pp. 149-160.

Srinivasan, D and Chattopadhyay, K (2004) Hardness of high strength nanocomposite Al–X–Zr (X = Si,Cu,Ni) alloys. In: Materials Science and Engineering A, 375-37 . pp. 1228-1234.

Bysakh, Sandip and Chattopadhyay, Kamanio and Maiwald, Thorsten and Galun, Rolf and Mordike, Barry L (2004) Microstructure evolution in laser alloyed layer of Cu–Fe–Al–Si on Cu substrate. In: Materials Science and Engineering A, 375-37 . pp. 661-665.

Bhattacharya, Victoria and Chattopadhyay, K (2004) Morphology and phase transformation of nanoscaled indium–tin alloys in aluminium. In: Materials Science and Engineering A, 375-37 . pp. 932-935.

Bhattacharya, P and Chattopadhyay, K and Bellon, P and Ishihara, KN (2004) Phase evolution and microtwins in the Ni–Al multilayers upon annealing and laser mixing. In: Materials Science and Engineering A, 375-37 . 1277–1284.

Biswas, K and Phanikumar, G and Chattopadhyay, K and Volkmann, T and Funke, O and Holland-Moritz, D and Herlach, DM (2004) Rapid solidification behaviour of undercooled levitated Fe–Ge alloy droplets. In: Materials Science and Engineering A, 375-37 . pp. 464-467.

Jana, S and Ramamurty, U and Chattopadhyay, K and Kawamura, Y (2004) Subsurface deformation during Vickers indentation of bulk metallic glasses. In: Materials Science and Engineering A, 375-37 . pp. 1191-1195.

Chattopadhyay, K and Varghese, V (2004) Understanding mechanical energy driven nonequilibrium processing: some results. In: Materials Science and Engineering A, 375-37 . pp. 72-77.

Shabadi, Rajashekhar and Kumara, Subodh and Roven, Hans J and Dwarakadasa, ES (2004) Characterisation of PLC band parameters using laser speckle technique. In: Materials Science and Engineering A, 364 (1-2). pp. 140-150.

Sivakesavam, O and Prasad, YVRK (2003) Hot deformation behaviour of as-cast Mg-2Zn-1Mn alloy in compression: a study with processing map. In: Materials Science and Engineering A, 362 (1-2). pp. 118-124.

Seshan, S and Jayamathy, M and Kailas, SV and Srivatsan, TS (2003) The tensile behavior of two magnesium alloys reinforced with silicon carbide particulates. In: Materials Science and Engineering A, 363 (1-2). pp. 345-351.

Kavitha, R and Hegde, SR and Jayaram, Vikram (2003) Oxide films by combustion pyrolysis of solution precursors. In: Materials Science and Engineering A, 359 (1-2). pp. 18-23.

Panneerselvam, M and Agrawal, Ankur and Rao, KJ (2003) Microwave sintering of $MoSi_2-SiC$ composite. In: Materials Science and Engineering A, 356 (1-2). pp. 267-273.

Sundar, RS and Sastry, DH and Prasad, YVRK (2003) Hot workability of as-cast Fe3Al-2.5%Cr intermetallic alloy. In: Materials Science and Engineering A, 347 (1-2). pp. 86-92.

Kumar, Sudheer P and Ramachandra, S and Ramamurty, U (2003) Effect of displacement-rate on the indentation behavior of an aluminum foam. In: Materials Science and Engineering A, 347 (1-2). pp. 330-337.

Swaminathan, S and Rao, BS and Jayaram, V (2002) The influence of oxygen impurities on the formation of AlN-Al composites by infiltration of molten Al-Mg. In: Materials Science and Engineering A, 337 (1-2). pp. 134-139.

Tantri, Srikari P and Jayasingh, Moses E and Biswas, SK and Ramasesha, Sheela K (2002) Role of in situ generated tribofilm on the tribological characteristics of monolith and TiB2 reinforced MoSi2 intermetallic. In: Materials Science and Engineering A, 336 (1-2). pp. 64-71.

Balasubrahmanyam, VV and Prasad, YVRK (2002) Deformation behaviour of beta titanium alloy Ti–10V–4.5Fe–1.5Al in hot upset forging. In: Materials Science and Engineering A, 336 (1-2). pp. 150-158.

Sivakesavam, O and Prasad, YVRK (2002) Characteristics of superplasticity domain in the processing map for hot working of as-cast Mg-11.5Li-1.5Al alloy. In: Materials Science and Engineering A, 323 (1-2). pp. 270-277.

Leboydkin, M and Fressengeas, C and Ananthakrishna, G and Kubin, LP (2001) Statistical and multifractal analysis of the Portevin–Le Chatelier effect. In: Materials Science and Engineering A, 319-32 . pp. 170-175.

Ananthakrishna, G and Noronha, SJ and Fressengeas, C and Kubin, LP (2001) Crossover in the dynamics of Portevin–Le Chatelier effect from chaos to SOC. In: Materials Science and Engineering A, 309-31 . pp. 316-319.

Prasad, YVRK and Sastry, DH and Deevi, SC (2001) Hot working behavior of extruded powder products of B2 iron aluminide alloys. In: Materials Science and Engineering A, 311 (1-2). pp. 42-53.

Fuxiao, Yu and Jianzhong, Cui and Ranganathan, S and Dwarakadasa, ES (2001) Fundamental differences between spray forming and other semisolid processes. In: Materials Science and Engineering A, 304-30 . pp. 621-626.

Ravishankar, N and Abinandanan, TA and Chattopadhyay, K (2001) Application of effective potential formalism to mechanical alloying in Ag–Cu and Cu–Fe systems. In: Materials Science and Engineering A, 304-30 . pp. 413-417.

Gandhi, AS and Jayaram, V and Chokshi, AH (2001) Low temperature densification behaviour of metastable phases in $ZrO_2–Al_2O_3$ powders produced by spray pyrolysis. In: Materials Science and Engineering A, 304-30 . pp. 785-789.

Bysakh, S and Das, PK and Chattopadhyay, K (2001) Metastable microstructures in laser ablation deposited aluminium-50 at.% nickel thin films. In: Materials Science and Engineering A, 304-30 . pp. 608-611.

Srinivasan, Dheepa and Chattopadhyay, K (2001) Metastable phase evolution and hardness of nanocrystalline Al–Si–Zr alloys. In: Materials Science and Engineering A, 304-30 . pp. 534-539.

Chinnasamy, CN and Narayanasamy, A and Ponpandian, N and Chattopadhyay, K and Saravanakumar, M (2001) Order–disorder studies and magnetic properties of mechanically alloyed nanocrystalline Ni3Fe alloy. In: Materials Science and Engineering A, 304 (Sp. Is). pp. 408-412.

Ranganathan, S and Subramaniam, Anandh and Ramakrishnan, K (2001) Rational approximant structures to decagonal quasicrystals. In: Materials Science and Engineering A, 304-30 . pp. 888-891.

Varghese, V and Sharma, A and Chattopadhyay, K (2001) Reaction ball milling of systems involving ionic bonds. In: Materials Science and Engineering A, 304-30 . pp. 434-437.

Jayaram, Vikram and Rani, Sirisha B (2001) Soft chemical routes to the synthesis of extended solid solutions of wurtzite ZnO–MO (M=Mg,Co,Ni). In: Materials Science and Engineering A, 304-30 . pp. 800-804.

Raja, Manivel M and Ponpandian, N and Majumdar, B and Narayanasamy, A and Chattopadhyay, K (2001) Soft magnetic properties of nanostructured FINEMET alloy powder cores. In: Materials Science and Engineering A, 304-30 . pp. 1062-1065.

Sastry, DH and Prasad, YVRK and Deevi, SC (2001) Influence of temperature and strain rate on the flow stress of an FeAl alloy. In: Materials Science and Engineering A, 299 (1-2). 157 -163.

Ranganathan, S and Ramakrishnan, K and Kulkarni, UD and Mukhopadhyay, NK (2000) On the relationship between cubic crystalline coincidence site lattices and quasiperiodic superlattices. In: Materials Science and Engineering A, 294-29 . pp. 429-433.

Sundar, RS and Baligidad, RG and Prasad, YVRK and Sastry, DH (1998) Processing of iron aluminides. In: Materials Science and Engineering A, 258 (1-2). pp. 219-228.

Srinivasan, Dheepa and Chattopadhyay, K (1998) Formation and coarsening of a nanodispersed microstructure in melt spun Al–Ni–Zr alloy. In: Materials Science and Engineering A, 255 (1-2). pp. 107-116.

Venkatesh, K and Bobji, MS and Biswas, SK (1998) Some features of surface topographical power spectra generated by conventional machining of a ductile metal. In: Materials Science and Engineering A, 252 (1). pp. 153-155.

Somani, MC and Muraleedharan, K and Prasad, YVRK and Singh, V (1998) Mechanical processing and microstructural control in hot working of hot isostatically pressed P/M IN-100 superalloy. In: Materials Science and Engineering A, 245 (01). pp. 88-99.

Pan, J and Surappa, MK and Saravanan, RA and Liu, BW and Yang, DM (1998) Fabrication and characterization of $SiC/MoSi_2 $composites. In: Materials Science and Engineering A, 244 (02). pp. 191-198.

Prasad, YVRK and Seshacharyulu, T (1998) Processing maps for hot working of titanium alloys. In: Materials Science and Engineering A, 243 (1-2). pp. 82-88.

Chokshi, Atul H (1997) A comparative examination of superplastic flow and fracture in metals and ceramics. In: Materials Science and Engineering A, 234-23 . pp. 986-990.

Chattopadhyay, K (1997) Synthesis and properties of nanodispersed granular materials. In: Materials Science and Engineering A, 226 . pp. 1012-1018.

Murty, BS and Rao, Mohan M and Ranganathan, S (1995) Differences in the glass-forming ability of rapidly solidified and mechanically alloyed Ti-Ni-Cu alloys. In: Materials Science and Engineering A, 196 (1-2). pp. 237-241.

Gadag, SP and Srinivasan, MN and Mordike, BL (1995) Effect of laser processing parameters on the structure of ductile iron. In: Materials Science and Engineering A, 196 (1-2). pp. 145-154.

Chowdhury, Roy S and Narasimhan, R (1995) Finite element simulations of ductile rupture in a constrained metal foil. In: Materials Science and Engineering A, 191 (1-2). pp. 27-37.

Murali, S and Raman, KS and Murthy, KSS (1995) The formation of ?-FeSiAl5 and Be---Fe phases in Al---7Si---0.3Mg alloy containing Be. In: Materials Science and Engineering A, 190 (1-2). pp. 165-172.

Sagar, PK and Banerjee, D and Prasad, YVRK (1994) Processing of an α-2 aluminide alloy, Ti---24Al---11Nb. In: Materials Science and Engineering A, 177 (1-2). pp. 185-197.

Raviprasad, K and Aoki, K and Chattopadhyay, K (1993) The nature of dislocations and effect of order in rapidly solidified Fe-(5.5-7.5)wt.%Si alloys. In: Materials Science and Engineering A, 172 (1-2). pp. 125-135.

Ravichandran, N and Prasad, YVRK (1992) Influence of oxygen on dynamic recrystallization during hot working of polycrystalline copper. In: Materials Science and Engineering A, 156 (2). pp. 195-204.

Murali, S and Raman, KS and Murthy, KSS (1992) Effect of magnesium, iron (impurity) and solidification rates on the fracture toughness of Al-7Si-0.3Mg casting alloy. In: Materials Science and Engineering A, 151 (1). pp. 1-10.

Chandra, Sarath D and Avadhani, GS and Kishore, * (1991) Effect of SiC particles on the mechanical properties of glass-phenolic composites. In: Materials Science and Engineering A, 136 (30). pp. 179-182.

Swamy, VT and Chattopadhyay, K and Ranganathan, S (1990) The Nature of Metastable Phase Formation in the Microsecond Pulsed Laser-melted Pool of Al-Ge Eutectic Alloy. In: Materials Science and Engineering A, 123 (2). pp. 247-254.

Ravichandrana, KS and Dwarakadasaa, ES (1986) Some Considerations on the Occurrence of Intergranular Fracture during Fatigue Crack growth in Steels. In: Materials Science and Engineering A, 83 (1). L11 -L16.