Browse by Journal / Conference

Mahesh, V and George, JP and Mahesh, V and Chakraborthy, H and Mukunda, S and Ponnusami, SA (2023) Dry-sliding wear properties of 3D printed PETG/SCF/OMMT nanocomposites: Experimentation and model predictions using artificial neural network. In: Journal of Reinforced Plastics and Composites .

Adhikari, D and Gururaja, S and Hemchandra, S and Ko�í, J (2022) Resin infusion in porous preform in the presence of HPM considering complex geometry and gravity: Flow simulation and experimental validation. In: Journal of Reinforced Plastics and Composites .

Adhikari, D and Gururaja, S and Hemchandra, S (2020) Vacuum infusion in porous preform with different mould configurations: Flow simulation and experimental validation. In: Journal of Reinforced Plastics and Composites . (In Press)

Kumar, Vijaya RL and Bhat, MR and Murthy, CRL (2013) Experimental analysis of composite single-lap joints using digital image correlation and comparison with theoretical models. In: Journal of Reinforced Plastics and Composites, 32 (23). pp. 1858-1876.

Naik, GN and Gyan, S and Satheesh, R and Ganguli, R (2011) Minimum weight design of fiber-reinforced laminated composite structures with maximum stress and Tsai-Wu failure criteria. In: Journal of Reinforced Plastics and Composites, 30 (2). pp. 179-192.

Murthy, Narasimha HN and Sreejith, M and Krishna, M and Sharma, SC and Sheshadri, TS (2010) Seawater Durability of Epoxy/Vinyl Ester Reinforced with Glass/Carbon Composites. In: Journal of Reinforced Plastics and Composites, 29 (10). pp. 1491-1499.

Sharma, SC and Sheshadri, TS and Krishna, M and Murthy, HN Narasimha and Jose, Jeena (2009) Influence of Solvents on the MWCNT/Adhesive Grade Epoxy Nanocomposites Preparation. In: Journal of Reinforced Plastics and Composites, 28 (22). pp. 2805-2812.

Kishore, * and Santra, S (2005) Impact Studies in Elastomer, Fly Ash, and Hybrid-filled Epoxy Composites: Part I - Room Temperature Curing. In: Journal of Reinforced Plastics and Composites, 24 (9). pp. 903-922.

Kishore, * and Santra, Sanjitarani (2005) Impact Studies in Elastomer, Fly Ash, and Hybrid-filled Epoxy Composites: Part II -Comparison of Data and Fracture Features of the Samples Cured via a Single Room Temperature and Multiple High Temperatures. In: Journal of Reinforced Plastics and Composites, 24 (10). pp. 1013-1024.

Kishore, * and Santra, Sanjitarani (2005) Individual and Combined Roles of CTBN and Fly Ash in Epoxy System Under Compression: Correlation between Microscopic Features and Mechanical Behavior. In: Journal of Reinforced Plastics and Composites, 24 (3). pp. 299-313.

Kishore, * and Ravikumar, NL and Kulkarni, SM (2004) Compression Strength of Aqueous Media Exposed Epoxy System Containing Silane Surface Bearing Fly Ash Particles. In: Journal of Reinforced Plastics and Composites, 23 (9). pp. 959-968.

Kishore, * and Mahajan, SS and Kulkarni, SM (2003) Water Ingression and Compression Properties of Epoxy Containing Ash Particles with their Surfaces Containing Paraffin Oil Film. In: Journal of Reinforced Plastics and Composites, 22 (16). pp. 1467-1476.

Kulkarni, SM and Kishore, * (2003) Effects of Filler Content and Hygrothermal Ageing on Compressive Properties of Fly Ash-Epoxy Composites. In: Journal of Reinforced Plastics and Composites, 22 (11). pp. 973-982.

Kulkarni, SM and Kishore, * (2002) Compressive strength of epoxy with bimodal filling of flyash. In: Journal of Reinforced Plastics and Composites, 21 (9). pp. 857-865.

Kishore, * and Maiti, A (2001) Compressive behavior and fracture features of rubber bearing glass-epoxy composites exposed to aqueous media. In: Journal of Reinforced Plastics and Composites, 20 (17). pp. 1546-1554.

Khan, Bijoysri and Viswanath, B (2001) Effect of Water Absorption on the Impact Response of Carbon-Epoxy System Containing Buffer Strips. In: Journal of Reinforced Plastics and Composites, 20 (16). pp. 1430-1443.

Karthikeyan, CS and Kishore, * and Sankaran, S (2001) Effect of absorption in aqueous and hygrothermal media on the compressive properties of glass fiber reinforced syntactic foam. In: Journal of Reinforced Plastics and Composites, 20 (11). pp. 982-993.

Karthikeyan, CS and Kishore, * and Sankaran, S (2000) Comparison of compressive properties of fiber-free and fiber-bearing syntactic foams. In: Journal of Reinforced Plastics and Composites, 19 (9). pp. 732-742.

Sampathkumaran, P and Seetharamu, S and Murali, A and Kumar, RK (1999) Dry Sliding Wear Behavior of Glass-Epoxy Composite. In: Journal of Reinforced Plastics and Composites, 18 (1). pp. 55-62.

Gupta, Nikhil and Kishore, * and Sankaran, S (1999) On the characterisation of syntactic foam core sandwich composites for compressive properties. In: Journal of Reinforced Plastics and Composites, 18 (14). pp. 1347-1357.

Kishore, * and Singh, VK (1999) Studies on the variations in compression strengths of graphite powders bearing glass-epoxy composites exposed to humid conditions. In: Journal of Reinforced Plastics and Composites, 18 (3). pp. 224-232.

Kishore, * and Khan, B (1998) Comparative evaluation of impact performance of laminate composites containing impact induced/mechanically inserted defects. In: Journal of Reinforced Plastics and Composites, 17 (16). pp. 1463-1471.

Venkatraman, S and Kishore, * (1998) Investigations on the role of foam layers in the failure of glass-epoxy composite subjected to repeated impacts. In: Journal of Reinforced Plastics and Composites, 17 (08). pp. 741-751.

Venkatraman, S and Kishore, * (1998) Response to impacts in composites containing foam. In: Journal of Reinforced Plastics and Composites, 17 (14). pp. 1281-1291.

Venkatraman, S and Kishore, * (1997) Impact studies in glass epoxy laminates containing foam. In: Journal of Reinforced Plastics and Composites, 16 (7). pp. 618-630.

Sainathan, N and Padmanabhan, K and Sashidhara, S and Rao, RMVGK (1995) Influence of Particulate Graphite Additions on the Shear Related Behaviour of Glass Fabric Reinforced Epoxy Composites. In: Journal of Reinforced Plastics and Composites, 14 (5). pp. 445-457.

K, Padmanabhan and *, Kishore (1992) Influence of Circular Defects on the Flexural Strength of Kevlar/Epoxy Composites. In: Journal of Reinforced Plastics and Composites, 11 (2). pp. 211-219.

Rao, KP and Issac, Jason Cherian and Viswanath, S and Murthy, Sridhara S (1991) Optimum Design of Composite Laminates for Strength by Ranking. In: Journal of Reinforced Plastics and Composites, 10 (5). 477 -494.

Mohan, Rengarajan and Kishore, * (1985) Jute-Glass Sandwich Composites. In: Journal of Reinforced Plastics and Composites, 4 (2). pp. 186-194.

Subramanian, C and Kishore, * (1984) Influence of Graphite Type, Modification and Hot Working on Wear of Aluminium Based Particulate Composites. In: Journal of Reinforced Plastics and Composites, 3 (4). pp. 278-293.