|
 | Up a level |
Roy, S and Sundaram, NK (2023) A custom arc-length Finite Element solver for large deformation adhesive contacts using a k-d tree accelerated volumetric interaction scheme. In: International Journal for Numerical Methods in Engineering .
Dhas, B and Nagaraja, JK and Roy, D and Reddy, JN (2022) A mixed method for 3D nonlinear elasticity using finite element exterior calculus. In: International Journal for Numerical Methods in Engineering .
Ajith, G and Ghosh, D (2022) A novel method for solving nonlinear stochastic mechanics problems using FETI-DP. In: International Journal for Numerical Methods in Engineering .
Kumar, P and Langelaar, M (2021) On topology optimization of design-dependent pressure-loaded three-dimensional structures and compliant mechanisms. In: International Journal for Numerical Methods in Engineering, 122 (17). p. 4787.
Dutta, S and Jog, CS (2021) A monolithic arbitrary Lagrangian�Eulerian-based finite element strategy for fluid�structure interaction problems involving a compressible fluid. In: International Journal for Numerical Methods in Engineering .
Avasarala, S and Subramani, D (2021) A non-Gaussian Bayesian filter for sequential data assimilation with non-intrusive polynomial chaos expansion. In: International Journal for Numerical Methods in Engineering .
Nurtaj Hossain, M and Ghosh, D (2020) Adaptive reduced order modeling for nonlinear dynamical systems through a new a posteriori error estimator: Application to uncertainty quantification. In: International Journal for Numerical Methods in Engineering, 121 (15). pp. 5417-3441.
Bordas, Stephane PA and Natarajan, Sundararajan and Kerfriden, Pierre and Augarde, Charles Edward and Mahapatra, Roy D and Rabczuk, Timon and Dal Pont, Stefano (2011) On the performance of strain smoothing for quadratic and enriched finite element approximations (XFEM/GFEM/PUFEM). In: International Journal for Numerical Methods in Engineering, 86 (4-5, S). pp. 637-666.
Jog, CS and Pal, RK (2011) A monolithic strategy for fluid-structure interaction problems. In: International Journal for Numerical Methods in Engineering, 85 (4). pp. 429-460.
Natarajan, Sundararajan and Mahapatra, Roy D and Bordas, Stephane PA (2010) Integrating strong and weak discontinuities without integration subcells and example applications in an XFEM/GFEM framework. In: International Journal for Numerical Methods in Engineering, 83 (3). pp. 269-294.
Banerjee, B and Roy, D and Vasu, RM (2010) Self-regularized pseudo time-marching schemes for structural system identification with static measurements. In: International Journal for Numerical Methods in Engineering, 82 (7). pp. 896-916.
Banerjee, B and Roy, D and Vasu, RM (2010) Self-regularized pseudo time-marching schemes for structural system identification with static measurements. In: International Journal for Numerical Methods in Engineering, 82 (7). pp. 896-916.
Ghosh, Debraj and Avery, Philip and Farhat, Charbel (2009) An FETI-preconditioned conjuerate gradient method for large-scale stochastic finite element problems. In: International Journal for Numerical Methods in Engineering, 80 (6-7, Sp. Iss. SI). pp. 914-931.
Natarajan, Sundararajan and Bordas, Stephane and Mahapatra, D Roy (2009) Numerical integration over arbitrary polygonal domains based on Schwarz-Christoffel conformal mapping. In: International Journal for Numerical Methods in Engineering, 80 (1). pp. 103-134.
Jog, CS (2008) A hybrid element formulation for the three-dimensional penalty finite element analysis of incompressible fluids. In: International Journal for Numerical Methods in Engineering, 73 (1). pp. 123-145.
Hu, N and Wang, HH and Yan, B and Fukunaga, H and Mahapatra, Roy D and Gopalakrishnan, S (2007) The partition of unity finite element method for elastic wave propagation in Reissner-Mindlin plates. In: International Journal for Numerical Methods in Engineering, 70 (12). pp. 1451-1479.
Sajeeb, R and Roy, D and Manohar, CS (2007) Numerical aspects of a real-time sub-structuring technique in structural dynamics. In: International Journal for Numerical Methods in Engineering, 72 (11). pp. 1261-1313.
Mankame, ND and Ananthasuresh, GK (2007) Synthesis of contact-aided compliant mechanisms for non-smooth path generation. In: International Journal for Numerical Methods in Engineering, 69 (12). pp. 2564-2605.
Ghosh, S and Roy, D (2007) Multi-step tangential versus transversal linearizations in non-linear dynamics. In: International Journal for Numerical Methods in Engineering, 72 (5). pp. 582-605.
Jog, CS and Kelkar, PP (2006) Non-linear analysis of structures using high performance hybrid elements. In: International Journal for Numerical Methods in Engineering, 68 (4). pp. 473-501.
Chakraborty, A and Gopalakrishnan, S and Kausel, E (2005) Wave propagation analysis in inhomogeneous piezo-composite layer by the thin-layer method. In: International Journal for Numerical Methods in Engineering, 64 (5). pp. 567-598.
Jog, CS and Annabattula, R (2005) The development of hybrid axisymmetric elements based on the Hellinger-Reissner variational principle. In: International Journal for Numerical Methods in Engineering .
Quadros, WR and Ramaswami, K and Prinz, FB and Gurumoorthy, B (2004) LayTracks: a new approach to automated geometry adaptive quadrilateral mesh generation using medial axis transform. In: International Journal for Numerical Methods in Engineering, 61 . pp. 209-237.
Roy, D (2004) A family of lower- and higher-order transversal linearization techniques in non-linear stochastic engineering dynamics. In: International Journal for Numerical Methods in Engineering, 61 (5). pp. 764-790.
Gopalakrishnan, S (2002) Behaviour of isoparametric quadrilateral family of Lagrangian fluid finite elements. In: International Journal for Numerical Methods in Engineering, 54 (5). pp. 731-761.
Jog, CS (2002) Topology design of structures using a dual algorithm and a constraint on the perimeter. In: International Journal for Numerical Methods in Engineering, 54 (7). pp. 1007-1019.
Jog, CS (2001) A robust dual algorithm for topology design of structures in discrete variables. In: International Journal for Numerical Methods in Engineering, 50 (7). pp. 1607-1618.
Gopalakrishnan, S (2000) A deep rod finite element for structural dynamics and wave propagation problems. In: International Journal for Numerical Methods in Engineering, 48 (5). pp. 731-744.
Allaire, G and Conca, Carlos and Vanninathan, M (1999) Spectral asymptotics of the Helmholtz model in fluid-solid structures. In: International Journal for Numerical Methods in Engineering, 46 (9). pp. 1463-1504.
Adhikari, Sondipon and Manohar, CS (1999) Dynamic Analysis of Framed Structures with Statistical Uncertainties. In: International Journal for Numerical Methods in Engineering, 44 (8). pp. 1157-1178.
Rajendran, S and Narasimhan, MV (1994) An accelerated subspace iteration method. In: International Journal for Numerical Methods in Engineering, 37 (1). 141 -153.
Murthy, Ramana PV and Rao, KP (1985) Analysis of laminated bimodulus composite thin shells of revolution using a doubly curved quadrilateral finite element. In: International Journal for Numerical Methods in Engineering, 21 (2). pp. 285-299.
Reddy, Sivasankara A (1982) Higher order accuracy finite-difference schemes for hyperbolic conservation laws. In: International Journal for Numerical Methods in Engineering, 18 (7). pp. 1019-1029.
Mangalgiri, PD and Dattaguru, B and Ramamurthy, TS (1978) Specification of skew conditions in finite element formulation. In: International Journal for Numerical Methods in Engineering, 12 (6). pp. 1037-1041.
Chandrashekhara, K and Jacob, Abraham K (1977) An experimental-numerical hybrid technique for three dimensional stress analysis. In: International Journal for Numerical Methods in Engineering, 11 (12). pp. 1845-1863.
Raju, IS and Krishnamurty, AV and Rao, AK (1973) Sector elements for matrix displacement analysis. In: International Journal for Numerical Methods in Engineering, 6 (4). pp. 553-563.
Rao, Venkateswara G and Murty, Krishna AV and Rao, Kameswara A (1972) Bounds for eigenvalues in some vibration and stability problems. In: International Journal for Numerical Methods in Engineering, 5 (2). pp. 237-242.
Parsad, KSRK and Murty, Krishna AV and Rao, AK (1972) A finite element analogue of the modified Rayleigh-Ritz method for vibration problems. In: International Journal for Numerical Methods in Engineering, 5 (2). pp. 163-169.
Rao, AK and Raju, IS and Murty, Krishna AV (1971) A powerful hybrid method in finite element analysis. In: International Journal for Numerical Methods in Engineering, 3 (3). pp. 389-403.
